Lost Openvix backup menu

[ross_37]

Hi
I have just updated the software on Octagon Sx88V2 from Openvix 6.4.004 to 6.4.007 and when going to Menu l can't see vix menu items any pointers ?

[twol]

Hi
I have just updated the software on Octagon Sx88V2 from Openvix 6.4.004 to 6.4.007 and when going to Menu l can't see vix menu items any pointers ?
post debug log......... to enable menu/setup/system/log/settings ... enable, set local time
post here

[ross_37]

Hi twol Please find the debug logs as requested 65717

[twol]

How did you update the image, via software update or online flash?

Either way you need to flash the receiver with latest software

[ross_37]

I completed a software update
Plan to upgrade again reinstalling 6.4.007

[twol]

I completed a software update
Plan to upgrade again reinstalling 6.4.007

You need to flash as that image is corrupted, hence no ViX plugin

[ross_37]

Hi twol
I have got myself into a problem in that l went into the recovery mode and reloaded the 6.4.007 which has resulted in me loosing the dual boot configuration
Currently l have 65721 and not sure how to progress to bring it back 65722
would welcome some guideance

[twol]

Hi twol
I have got myself into a problem in that l went into the recovery mode and reloaded the 6.4.007 which has resulted in me loosing the dual boot configuration
Currently l have 65721 and not sure how to progress to bring it back 65722
would welcome some guideance
so you have both slots loaded with OpenViX, one is 6.4.4 and the other 6.4.7 correct??

[ross_37]

Hi twol
yes but not sure how to load the dual boot to replace the 6.4.007 or where to get the software from.
Am l right sugesting the network mutiboot image ?

[twol]

Hi twol
yes but not sure how to load the dual boot to replace the 6.4.007 or where to get the software from.
Am l right sugesting the network mutiboot image ?
you still have 2 multiboot slots ....... so if you have now installed 6.4.007 and boot to it, you should be able to resore settings and finish the initialisation.
After that you should be able to use teh ViX plugin to flash another image into slot 1 or 2.
If by the dual boot, you mean the DefineOS image (?), then you would have to download from the network, but not sure why you would want this factory (Octagon) image.

[ross_37]

hi twol

Thank you for your help. I booted the box from the 6.4.004 and upgraded the box to 6.4.7 but l have the same problem as l origionally upgraded the box no Vix menus which you indicated was corrupt? is the curruption coming from the upgrade download?

[ross_37]

Hi twol

I am looking to go back to 6.4.4 but not sure how to load from USB as there is no download available on the download site

https://www.openvix.co.uk/index.php/guides-and-tutorials/receiver-usb-flashing-guides/octagon-usb-flashing-guides/

[twol]

hi twol

Thank you for your help. I booted the box from the 6.4.004 and upgraded the box to 6.4.7 but l have the same problem as l origionally upgraded the box no Vix menus which you indicated was corrupt? is the curruption coming from the upgrade download?

You used software update?

[twol]

So if you have 6.4.4 installed and working with the ViX plugin....
Blue button, select VIX
Run Backup settings.
Then choose ImageManager , go to downloads and download latest, then flash to slot 2 --- on reboot restore settings

[ross_37]

Hi twol

I have 6.4.004 working now but when looking at the multiboot selector l only have the recovery and the slot 1 6.4.4 current
I seem to have lost the 2 slots that l had previously

[twol]

Hi twol

I have 6.4.004 working now but when looking at the multiboot selector l only have the recovery and the slot 1 6.4.4 current
I seem to have lost the 2 slots that l had previously

If slot doesn,t show in multiboot selector it means there is no E2 image recognised in that slot.
If you go to imagemanager and try flashing, it will bring up all the slots available…….you should then see both slots 1 & 2

[ross_37]

hi twol

Many thanks there are 4 slots as you indicated
Thanks for your help

[twol]

hi twol

Many thanks there are 4 slots as you indicated
Thanks for your help

No problem , glad to help

[ross_37]

Hi twol
Sorry but l have installed 6,4,006 and when going to webif and oscamwebiff the port its using is ip:83 and should be lp:8895 as a result l am unable to view oscam config files

[twol]

Hi twol
Sorry but l have installed 6,4,006 and when going to webif and oscamwebiff the port its using is ip:83 and should be lp:8895 as a result l am unable to view oscam config files

What do you have in your oscam files? Webif is normally :80 ?

[ross_37]

Hi twol

my oscam config is set to 192.168.11.100:8895 in the oscam config file l have other boxes that work in this format sucessuly. This box did work and is strill working but can't view oscam webinterface

[webif]
httpport = 8895
httpuser = root
httppwd = xxxxx
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.11.0-192.168.20.255

[twol]

Hi twol

my oscam config is set to 192.168.11.100:8895 in the oscam config file l have other boxes that work in this format sucessuly. This box did work and is strill working but can't view oscam webinterface

[webif]
httpport = 8895
httpuser = root
httppwd = xxxxx
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.11.0-192.168.20.255
You need to start a separate post I am not clued up on this area, although I am not aware of chnages to webif for a few weeks

[ross_37]

Hi twol
Thanks for your assistance will log a new post

[deltec]

same thing has hapend to me to day sent my box crazy had to do a reflash i think thats what ill do from now on