Picon Folder

[lammy1961]

After flashing with VIX my Picons are now in media/sdb1/picon.....as
opposed to media/usb/picon.....with the old VTI 1.3 image.

Is this correct ?
As always....Thanks.

[punisher]

mount the usb again as media/usb, reboot, then your picons should end up in media/usb/picon

[dymebox]

I have mine on media/usb/picon - you can change this setting by going to: menu > setup > VIX > Devices Manager > Green Button to setup mounts.

[lammy1961]

Thanks for the replies guys.
Punisher, how do I "mount the usb again as media/usb"

Cheers.

[Stanman]

KITCHEN correctly you need to go into mount manager in the bid settings. Press blue and than vix.

[lammy1961]

I forgot to add that the picons are still visible despite being in: media/sdb1/picon
I'll try and follow the advice I have been given.

Thanks.

[lammy1961]

I'm in Device Manager it shows My HDD and my USB Stick: Mount /media/sdb1
Device /dev/sdb1 Type W95 FAT32

How do I change this to media/usb/picon

I'm sorry if I appear a bit thick, It's just not registering with me.

Could I just not use DCC and move it from media/sdb1/picon to media/usb/picon

Cheers.

[Stanman]

Sorry not at the duo, but what do the coloured buttons say? Also ok on the USB and see if that gives you additional options.

[lammy1961]

Give me an hour I have the family watching the TV for now.

Thanks for the swift reply.

[dymebox]

How do I change this to media/usb/picon

The sequence I mentioned earlier allows you to change it to media/usb. In devices manager highlight the USB and select Green. You can then use left/right on the remote to cycle through the mount options - just select media/usb ;)

[lammy1961]

Thanks for all the help guys...I'm sorted.
dymebox, I followed your instructions: menu > setup > VIX > Devices Manager > Green Button highlight the USB and select Green. You can then use left/right on the remote to cycle through the mount options - just select media/usb

Thank you so much.