[VU+ Duo2] wierd stand-by behaviour [Archive] - Satellite Support Forum .: Home of OpenViX Team:.

View Full Version : [VU+ Duo2] wierd stand-by behaviour

GiP

03-05-23, 14:53

Hi,

recently I noticed that when I press the "stand-by" button the STB goes black, I mean no image, no LCd no display , nothing for about 15-20 seconds, then tha lcd appear and everything seems OK,
Is this normal? From what I remember there was no delay.

G

deltec

05-05-23, 18:19

No there’s no delay

GiP

09-05-23, 11:08

Hi,

I just updated Vix and the problem seems to have disappeared,

G

GiP

18-05-23, 10:02

Hi,

I just updated Vix and the problem seems to have disappeared,

G

Nope, it's doing it again, I have no idea why, but it doesn't seem to have any other bad effects...
Maybe I'll try a reinstall from USB and see if it's some kind of corruption.

G

Huevos

18-05-23, 10:29

Nope, it's doing it again, I have no idea why, but it doesn't seem to have any other bad effects...
Maybe I'll try a reinstall from USB and see if it's some kind of corruption.

G
Switch on debug logs and after it does this weird thing save the log and post it here..

GiP

22-05-23, 19:22

I tried with the Debug on, but either the required reboot or the fact that debug was on ( I had this happen with software I wrote...) fixed things.
After more than two days and several on-off it never happened again. Switched Deb( I don't know if there is a limit with it on) off and we'll see what happens.

G

birdman

22-05-23, 22:48

After more than two days and several on-off it never happened again. Switched Deb( I don't know if there is a limit with it on) off and we'll see what happens.Turning debug logs on only gets the output written to a file, rather than it disappearing into /dev/null.
It doesn't alter any code that is executed by enigma2 - the message get printed anyway.

GiP

16-06-23, 18:34

Hi,

finally I have the debug log with the delay.
I don't know if it can be useful to understand what's in the file, but I had the debug on for a couple days and the first time I had the 15-20sec delay I immediately disabled the debug and rebooted (I had to stop a record first).

G

GiP

10-07-23, 13:49

Hi,
I updated to 6.4 but the weird behaviour is still there....

I made a log, but for a while all it seemed OK, then it happened again not the 15-20sec as before but about 9-10sec.
I tink the relevant part is this (from the button presses to go into standby and the one that switched it on again)
I'll upload the entire log too...
G

<440407.6119> [InfoBarGenerics] Key: 116 (Break) KeyID='KEY_POWER' Binding='('POWER',)'.
<440407.8267> [AVSwitch] portlist is ['HDMI', 'YPbPr', 'RCA', 'Scart']
<440407.8713> [Standby] enter standby
<440407.8792> [eDVBCAService] free slot 0 demux 0 for service 1:0:19:10E1:3E8:13E:820000:0:0:0:
<440407.8793> [eDVBCAService] free service 1:0:19:10E1:3E8:13E:820000:0:0:0:
<440407.9143> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
<440407.9143> [eDVBPCR0] DEMUX_STOP ok
<440407.9144> [eDVBPCR0] destroy
<440407.9144> [eDVBVideo0] DEMUX_STOP ok
<440407.9154> [eDVBVideo0] VIDEO_STOP ok
<440407.9180> [eDVBVideo0] destroy
<440407.9181> [eDVBAudio0] AUDIO_STOP ok
<440407.9242> [eDVBAudio0] DEMUX_STOP ok
<440407.9242> [eDVBAudio0] AUDIO_CONTINUE ok
<440407.9312> [eDVBAudio0] destroy
<440407.9313> [decoder][eDVBText] resetPID
<440407.9313> [decoder][eDVBText] freeCache
<440407.9348> [eDVBResourceManager] start release channel timer
<440407.9863> [Skin] Processing screen 'Standby', position=(0, 0), size=(1280 x 720) for module 'Standby'.
<440407.9917> [Skin] Processing screen 'StandbySummary' from list 'StandbySummary, Standby_summary, SimpleSummary, ScreenSummary', position=(0, 0), size=(140 x 32) for module 'StandbySummary'.
<440408.0563> [eDboxLCD] setLCDBrightness 0
<440408.0594> [FanControl]: setting fan values (standby mode): fanid = 0, voltage = 5, pwm = 0
<440409.8110> [gRC] main thread is non-idle! display spinner!
<440411.8433> [gRC] main thread is non-idle! display spinner!
<440415.8367> [DVBCAHandler] no more services
<440415.8429> [eDVBResourceManager] release cached channel (timer timeout)
<440415.8437> [eDVBLocalTimerHandler] remove channel 0x19bd8c8
<440415.8438> [eEPGTransponderDataReader] remove channel 0x19bd8c8
<440415.8457> [eDVBResourceManager] stop release channel timer
<440417.1796> [eInputDeviceInit] 1 74 (116) 1
<440417.1797> [eRCDeviceInputDev] emit: 1
<440417.1804> [InfoBarGenerics] Key: 116 (Make) KeyID='KEY_POWER' Binding='('POWER',)'.

birdman

10-07-23, 17:06

Is there any particular reason why you have ~11,000 services which do not appear in any bouquets?

abu baniaz

10-07-23, 17:33

If you perform a scan using functions in Enigma2 and nota plugin, they are not added to any bouquet by default. The last scanned always changes. I regularly watch from the orbital list. Pity selection only allows 1 letter.

birdman

10-07-23, 19:46

If you perform a scan using functions in Enigma2 and nota plugin, they are not added to any bouquet by default. It was really the 11,000+ services that I was wondering about. It seems a lot. Is that number normal?

abu baniaz

10-07-23, 20:29

About normal for Motorised dish.

GiP

11-07-23, 12:36

Is there any particular reason why you have ~11,000 services which do not appear in any bouquets?

No idea, I just downloaded a setting for HotBird and Astra and built my "favorite" from that...
I don't think I ever did a full scan...

G

GiP

24-07-23, 09:22

No idea what the problem could be? If there is a problem....

G

twol

24-07-23, 10:26

No idea what the problem could be? If there is a problem....

G
Do you use lcd4linux ?

GiP

24-07-23, 17:20

Do you use lcd4linux ?

Is it the prog to modify the small screen? Yes I used that.

G

twol

24-07-23, 22:09

Is it the prog to modify the small screen? Yes I used that.

G

Then try running without it and see if issue happens

Trial

25-07-23, 07:29

Hi,

No idea, I just downloaded a setting for HotBird and Astra and built my "favorite" from that...
I don't think I ever did a full scan...

G
you only have Astra and Hotbird? Which settings did you download? Astra and Hotbird only have 3500-4000 services.

Rlf

GiP

25-07-23, 10:35

Hi,

you only have Astra and Hotbird? Which settings did you download? Astra and Hotbird only have 3500-4000 services.

Rlf

It was the Vhannibal (http://www.vhannibal.net/) HB+Astra+DDT settings.

G

GiP

25-07-23, 10:37

Then try running without it and see if issue happens

OK, should I delete the plugin (is it a plugin?) Or delete or rename my configuration and revert to the default? Where is the config file?

G

twol

25-07-23, 11:31

OK, should I delete the plugin (is it a plugin?) Or delete or rename my configuration and revert to the default? Where is the config file?

G
Make sure you have a settings backup (blue button, ViX plugin, settings backup)
I would go to plugins (long blue on remote) red button, extension … remove

GiP

03-08-23, 19:28

I removed the lcd4linux but then the LCD and other display remained black and I couldn't see if there was a delay,
so I removed my configuration ( maybe that was the problem) and reloaded tthe plugin and now there is what I suppose is the default: just the time when in stan-by and the channel name when on.
After a few days I noticed a little delay (4-5 sec) but not the 15-20sec I had before.... we'll see if it worsen.

Is there a way to have something on the lcd without lcd4? I'd like to try that.

G

Orlandox

04-08-23, 16:29

If LCD4Linux is disabled, then \etc\enigma2\skin_user.xml must be cleared out of ,  and  references. Otherwise LCD display is black no matter what display skin you use.

Huevos

04-08-23, 17:52

Orlandox

04-08-23, 20:11

LCD4Linux is writing to skin_user.xml this to my Ultimo4K : (SummaryTemplate is the problem)

<skin>
<screen name="SummaryTemplate">
<widget source="global.CurrentTime" render="PixmapLcd4linux" position="fill" size="800,480" alphatest="blend" />
</screen>



<screen name="InfoBarSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="ChannelSelection_summary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="MenuSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="SetupSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="SimpleSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="ChannelSelectionRadio_summary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="InfoBarSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="ChannelSelection_summary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="MenuSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="SetupSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="SimpleSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="ChannelSelectionRadio_summary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>




<screen name="InfoBarMoviePlayerSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="MovieSelection_summary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="MediaPlayerLCDScreen" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="MediaPlayer_summary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="EMCMoviePlayerSummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="EMCMoviePlayerSummaryGBHDQ" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="webradioFSdisplay" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="YampLCDScreen" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="InfoBarMoviePlayerSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="MovieSelection_summary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="MediaPlayerLCDScreen" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="MediaPlayer_summary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="EMCMoviePlayerSummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="EMCMoviePlayerSummaryGBHDQ" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="webradioFSdisplay" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

<screen name="YampLCDScreen" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>




<screen name="StandbySummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="StandbySummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

</skin>

Huevos

05-08-23, 09:13

What a load of rubbish. The plugin should not be writing to that location. That is a user location for users to modify the gui skin.

Huevos

05-08-23, 11:42

Also, why is it duplicating items

Orlandox

06-08-23, 12:35

Also, why is it duplicating items

What that id="3" is doing ?



<screen name="StandbySummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="StandbySummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>

Huevos

08-08-23, 12:44

What that id="3" is doing ?



<screen name="StandbySummary" position="fill">
<panel name="SummaryTemplate" />
</screen>

<screen name="StandbySummary" position="fill" id="3">
<panel name="SummaryTemplate" />
</screen>


No idea. Not really sure what any of it is for, or why anyone would need a picture of the moon on their front panel. Armchair astronomers?

Orlandox

08-08-23, 15:37

:D I have on one screen phases of the moon on LCD display when the box is at Idle...

GiP

04-09-23, 14:18

How is it possible to have something on the LCD screen without using lcd4linux?
I'd like to see if that is my problem, the delay now is about 30sec...

G

Trial

04-09-23, 14:50

Hi,
create your own skin_user.xml but additional content must be supported by the skin I think.

Ralf

GiP

08-01-24, 10:23

Hi,

I updated my STB (to 6.4.10, I think) and the weird delay seems to have disappeared. This time for real, it seems, it's been several days without it. I have no idea what could have fixed it, the list of changes is enormous!

Thanks for your work,

G