PDA

View Full Version : WIFI 'N' Sweex LW153 RT3070 NOT WORKING


mmcmedia
22-02-11, 13:13
According to the vti 2.2 bumf
"Support for WLAN Stick with RT3070 chipset (802.11b/g/n)"

Well just had one of theses turn up and it doesnt seem to work
The Sweex LW153 has the RT3070 chipset but it doesnt even show up in the network setting any ideas

Thanx
punisher
22-02-11, 14:40
Have you installed the drivers, plugged it in and then rebooted to see if it is recognised?
Sicilian
22-02-11, 14:41
We are hopefully looking into the RT3070 drivers soon in the ViX image.
punisher
22-02-11, 14:44
Ive got quite a few wireless n adapters at home with a few of those drivers going to mess about and see if any work when i get a minute lol
mmcmedia
22-02-11, 15:15
Have you installed the drivers, plugged it in and then rebooted to see if it is recognised?

ok enlighten me how do i install the drivers for this onto me vu according to the image specs of vti 2.2 the drivers already installed
Sicilian
22-02-11, 15:18
ok enlighten me how do i install the drivers for this onto me vu according to the image specs of vti 2.2 the drivers already installed

Is the RT3070 driver pre-installed in the VTI image or does it need installing from their feeds?
mmcmedia
22-02-11, 15:30
only dvb-t drivers in feeds and according to release info they should already be present ??
Sicilian
22-02-11, 15:33
only dvb-t drivers in feeds and according to release info they should already be present ??

I'm assuming you've tried plugging in, then rebooting and going to Network settings to see if its listed?
mmcmedia
22-02-11, 15:34
Yes sorry i should have mentioned ive tried that , wlan option doesnt even show up
just leaves me with lan option
Sicilian
22-02-11, 15:38
Yes sorry i should have mentioned ive tried that , wlan option doesnt even show up
just leaves me with lan option

Reboot > Then telnet to duo without doing anything else and send the command dmesg. Copy the output to a text file and post here. Then do the command lsusb.
mmcmedia
22-02-11, 15:46
Reboot > Then telnet to duo without doing anything else and send the command dmesg. Copy the output to a text file and post here. Then do the command lsusb.

So i take it i have to add lan connection aswell in order to telnet ?
Sicilian
22-02-11, 16:02
So i take it i have to add lan connection aswell in order to telnet ?

Yes you will.