View Full Version : [VU+ Ultimo4K] VU+ Multiboot
When VU+ Multiboot is installed to Ultimo4K having 003 image in slot 0 and 002 image in slot 1
64980
When 002 is running Standby & Restart looks like this
64981
You have recovery line to go to slot 0 image
But with Duo4K SE box running 002 you don`t have same possibility.
If you want to go to slot 0 image usb-stick having STARTUP_RECOVERY file is needed with power-off restart.
64982
When VU+ Multiboot is installed to Ultimo4K having 003 image in slot 0 and 002 image in slot 1
64980
When 002 is running Standby & Restart looks like this
64981
You have recovery line to go to slot 0 image
But with Duo4K SE box running 002 you don`t have same possibility.
If you want to go to slot 0 image usb-stick having STARTUP_RECOVERY file is needed with power-off restart.
64982
By popular request it was moved to the Multibootselector Menu
By popular request it was moved to the Multibootselector Menu
So where is Multibootselector Menu when running 002 image with Duo4K SE? See the last picture.
So where is Multibootselector Menu when running 002 image with Duo4K SE? See the last picture.
you only get the Recovery if you are running a multiboot system .. on any multiboot receiver-
If not running multiboot, there is no Recovery or Multibootselector option
you only get the Recovery if you are running a multiboot system .. on any multiboot receiver-
If not running multiboot, there is no Recovery or Multibootselector option
Is it difficult to understand that I have exactly same system in Ultimo4K and Duo4K SE boxes but they behave different way?
OpenVIX 003 in slot 0 and 002 in slot 1.
Is it difficult to understand that I have exactly same system in Ultimo4K and Duo4K SE boxes but they behave different way?
OpenVIX 003 in slot 0 and 002 in slot 1.
If you are running multiboot on Duo4K then you need to post the debug for me to look at.
If you are running multiboot on Duo4K then you need to post the debug for me to look at.
Of corce I am running multiboot having 003 image in slot 0.
Of corce I am running multiboot having 003 image in slot 0.
That is not running multiboot.
To run multiboot you need to enable multiboot (long press power and select enable multiboot) and then flash one of the multiboot slots
That is not running multiboot.
To run multiboot you need to enable multiboot (long press power and select enable multiboot) and then flash one of the multiboot slots
Long press of power just restarts box. No way to to select multiboot.
I was talkin of Duo4K SE box because I have one.
Obviously you @twol don`t have that box.
Long press of power just restarts box. No way to to select multiboot.
I was talkin of Duo4K SE box because I have one.
Obviously you @twol don`t have that box.
Should have been more correct -
long press power button on remote
Should have been more correct -
long press power button on remote
Are you stupid not to understand what I mean?
I would try again usb flash vix 6.3003 and use no settings restore and activate vu+multiboot.
Flash 6.3003 into slot 1 then other images in other slots
That way you have 6.3.003 on slot 1 to use as an image
Leave slot 0 recovery image as a plane image as an emergency image
Plus add debug logs for twol to look at
Are you stupid not to understand what I mean?Please read the forum rules again. Especially:
9. No abuse to other members
10. No arguing with mods (if you have any dispute PM an administrator)
Your behaviour is not going to motivate anyone to want to help you. If you have a problem with the image and are not able to discuss it in a civilised way please just remove the image from your hardware and go and play on another forum.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.