PDA

View Full Version : [VU+ Uno4KSE] Will this setup work. Read Text.


sandiego69
03-03-23, 13:03
I have the existing setup below which works very well. I would like to change the Universal LNB to a Unicable LNB. One feed would go to the Tuner B on the Duo 4k and the other to the Fransat box (single input). I have seen available a Twin LNB with one Unicable outlet and one legacy outlet which I assume would drive the motor.
I can record numerous channels on the fixed dish (28E) but I would like to record more channels on the motorised setup (mainly on 13E)

Will this work?64914
abu baniaz
03-03-23, 13:22
Unicable is not designed for a moving dish. However, there is a video tutorial on youtube where someone has done it, but it was one dish, not two as you intend



https://www.youtube.com/watch?v=SUqMt2-IAko
sandiego69
03-03-23, 15:18
Unicable is not designed for a moving dish. However, there is a video tutorial on youtube where someone has done it, but it was one dish, not two as you intend



https://www.youtube.com/watch?v=SUqMt2-IAko


The setup I have shown does work and extremely well. The only restriction is the limitations of only being able to make one recording at a time on the movable dish. This is why I want use a Unicable and Legacy LNB on the motorised dish.