PDA

View Full Version : Flashing new image


cactikid
03-01-23, 20:07
I have installed a 1TB San Disk internal SSD and initialized it.

I have made a backup and gone to downloads and downloaded 6.3

Previously i could flash a new image via Blue button but not listing Flash?

Done it twice and not seen so unsure why ?
dsayers
03-01-23, 20:19
In image manager highlight the image and press blue to flash
cactikid
03-01-23, 20:30
There is no Blue to flash is why i asked as done Couchflashing before as was seen.

Now an odd one gone back into Image manager and i see this ?64609
Willo3092
03-01-23, 20:33
Is the zip file in /media/hdd/imagebackups/

I changed the hdd on my Vu+ earlier and I had to create the directories manually for some reason.
cactikid
03-01-23, 20:37
6.2.11 downloads and i see flash ?
6.3.001 downloads multi zip and Flash is seen with Blue button

Now flashing on slot 3 .

So now wondering if on a different slot i got the above message as not used slots before
twol
03-01-23, 21:32
Reading this is a very confused story.
1. check where ImageManager is loading/saving images. press menu and modify if required.
2. if you are downloading from OpenVix/OpenPli/Openbh/Openoatv press yellow to download.
3. if download is OK, then you should now be able to flash with blue button
cactikid
03-01-23, 22:30
Reading this is a very confused story.
1. check where ImageManager is loading/saving images. press menu and modify if required.
2. if you are downloading from OpenVix/OpenPli/Openbh/Openoatv press yellow to download.
3. if download is OK, then you should now be able to flash with blue button

The only place was Openvix and was using a new SSD internal.
Yes was pressing yellow button it downloaded and did it twice.
Maybe i moved a slot and not noticed
After i moved slot and rebooted box i then saw the Lovely Blue Flash button and setting up from scratch. Cheers.
Huevos
03-01-23, 23:37
There is no Blue to flash is why i asked as done Couchflashing before as was seen.

Now an odd one gone back into Image manager and i see this ?64609You need to read the message on the screen. It says:

Device: None available

From ImageManager press MENU and set up a device.
cactikid
04-01-23, 00:27
Yet the storage device is seen initialized and mounted , does it need to be redone on all slots thinking not.

When slot was changed i then saw it.

First time doing multi slot images is why i asked.
Joe_90
04-01-23, 02:20
Nothing to do with slots. In ImageManager press MENU and select the folder where your images are stored.