View Full Version : Problems with YPbPr output with PLi Images
Anyone noticed that there seems to be a problem with the YPbPr with the PLi images, yet it's fine with DreamElite?
Is there a work around so the YPbPr video output looks like it should do rather than being very pink?
Ta
Have you updated your OpenPLi to latest? Press blue button > Software Management > Software update.
Cant say I've noticed as I've always used HDMI, but the above might be worth a shot. Also double check your A/V settings.
being very pink may indicate an error with one of the cables or input/output sockets. I'd recommend switching the cables (don't stick to the color guidance) and see if it makes any difference in the image or not. If it did, then a cable is damaged...
Thanks for the advice. I used the latest file - OpenPLi-unstable-vuduo-20100524_usb.zip, but also double checked by using the software management update. The initial screen always appears fine and then after a few seconds once the os has loaded it turns pink. I've doubled checked the cables and no problem. I think it has to be down to OpenPL as with the DreamElite offering I don't get these problems. Back to DreamElite I'm guessing until the bug is fixed :-(
Thanks
Thanks for the advice. I used the latest file - OpenPLi-unstable-vuduo-20100524_usb.zip, but also double checked by using the software management update. The initial screen always appears fine and then after a few seconds once the os has loaded it turns pink. I've doubled checked the cables and no problem. I think it has to be down to OpenPL as with the DreamElite offering I don't get these problems. Back to DreamElite I'm guessing until the bug is fixed :-(
Thanks
Have you checked the A/V settings in Menu > System > A/V settings?
Yes I've played around with the settings in A/V settings in Menu > System > A/V settings, but still no luck. Strange one - as the system loads ok and then after a few seconds turns pink, which makes me think it's a software issue (plus it works ok with DreamElite).
Thanks for your help.
is this happening with u using the images at its basic form with no addons or plugins installed activated. if not, try it plain and see....
Might be worth reporting the issue to the OpenPLi forums: -
http://www.pli-images.org/forum/viewforum.php?forum_id=61
Yep - no additions, just in it's very basic form. Well installed, but then I haven't disabled any of the plugins from the basic installation. I see the link below - so I will report it there and see if they can work their magic - thanks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.