Backup Problem

[malcolmp]

Openvix 6.2.011, Gigablue UHD UE4K. backup to media/hdd.

Hi, It seems every other time I do a Backup the box will complete the action, however when I ask the box to restore the backup, the box comes up with a "timeout message, unable to complete" I now do 2 backups, maybe 5 minutes apart. Any suggestions, please?

[twol]

Openvix 6.2.011, Gigablue UHD UE4K. backup to media/hdd.

Hi, It seems every other time I do a Backup the box will complete the action, however when I ask the box to restore the backup, the box comes up with a "timeout message, unable to complete" I now do 2 backups, maybe 5 minutes apart. Any suggestions, please?
debug log please (menu/setup/system/logs/settings .... change from flash, enable) reboot if not enabled

[malcolmp]

6453664537

Please find logs.

logs settings are in "/home/root/" do you want me to change the location?

thanks

[Huevos]

That is a crash log.

You need to turn on debug logs and set a location.
Menu>Setup>System>Logs

[malcolmp]

64538
Logs Settings

[malcolmp]

64538
Logs Settings

I think I forgot to enable

[malcolmp]

debug log please (menu/setup/system/logs/settings .... change from flash, enable) reboot if not enabled

I think I've got them now6454064541

[malcolmp]

debug log please (menu/setup/system/logs/settings .... change from flash, enable) reboot if not enabled

I think I've done as asked, ran backup, tried restore, still timeout.64542

[twol]

I think I've done as asked, ran backup, tried restore, still timeout.64542

789.3417> [BackupManager] Restoring Stage 6: restored settings file again
< 789.3418> [Console] command: killall -9 enigma2 && init 6
< 789.3422> [eConsoleAppContainer] Starting /bin/sh
< 789.3445> [Console] finished: tar -xzvf /media/hdd/backup/vix-rel-6.2.011-20221214-1341.tar.gz -C / etc/enigma2/settings

Its hung,
the restore has completed…. And tries to force a reboot, but I notice that epgimporter is also running and that obviously runs for a long time(you import a few satellites?) and I guess because multiple threads are running (and restore is killing E2) thats where the hang occurs.

you might try it when everything has calmed down - also please set logs to local time, makes it easier for old guys like me.

[malcolmp]

789.3417> [BackupManager] Restoring Stage 6: restored settings file again
< 789.3418> [Console] command: killall -9 enigma2 && init 6
< 789.3422> [eConsoleAppContainer] Starting /bin/sh
< 789.3445> [Console] finished: tar -xzvf /media/hdd/backup/vix-rel-6.2.011-20221214-1341.tar.gz -C / etc/enigma2/settings

Its hung,
the restore has completed…. And tries to force a reboot, but I notice that epgimporter is also running and that obviously runs for a long time(you import a few satellites?) and I guess because multiple threads are running (and restore is killing E2) thats where the hang occurs.

you might try it when everything has calmed down - also please set logs to local time, makes it easier for old guys like me.

Hello, Thanks. EPG runs for long time, yes. running 3 satellites, plus 3x IPTV. Switched off EPG import after booting up, Set logs to local time. Rebooted box, tried backup a few times, still showing "time out". Must have tried about five times (only updated once)

[twol]

Hello, Thanks. EPG runs for long time, yes. running 3 satellites, plus 3x IPTV. Switched off EPG import after booting up, Set logs to local time. Rebooted box, tried backup a few times, still showing "time out". Must have tried about five times (only updated once)

Can you switch to Simple 1080 skin and try again -----> mind you normally (in my view) you would only do this after a system reset, in which case nothing much is running when the restore takes place.(Menu/Setup/System/system reset

[malcolmp]

Can you switch to Simple 1080 skin and try again -----> mind you normally (in my view) you would only do this after a system reset, in which case nothing much is running when the restore takes place.(Menu/Setup/System/system reset

Hi. Switched to Simple 1080 OK, looks like it's behaving itself, thanks. Tried rebooting and reverting images quite a few times and had no problems going back. I'll keep you posted if things change. Many thanks!!