View Full Version : Tunner A& B config motorised setup
Hi,
I just got my new reciever today from WOS today.
How do I configure tunner A & B for motorised setup?
Not sure which conection at the back is A or B as not labled.
I have entered cordinates in Tuner A and set it to USALS/positioner mode etc
Kept tunner B looped to A as not sure how that one is configured.
Not having much luck after trying diffrent options but get zero results after a scan?
abu baniaz
26-03-22, 12:55
Draw a picture of your wiring to avoid confusion/errors.
There are a few uploads of what a second cable of motorised LNB is. But best we confirm how you have physically hooked up the wires.
I got it working although turning the dish to a selected saterlight is somtimes tempermental.
I have done the following:
Tuner A ( presumed input A in diagram)
Config - Simple
Mode - Positiner
Longitude 000.2018E
latitude 051.656N
Tuner B
set as - Equal to Tuner A
I have done a diagram as attached and I do have pland to install a second cabel from LNB back to inputv B of tunner
Attachment:
63566
abu baniaz
26-03-22, 20:54
That is wrong configuration. You have told the receiver it is connected to two different motorised dishes.
You only have one cable to the dish. You cannot split a Universal satellite signal. Just set one tuner until you install/connect the other signal wire. Leave the rest in FBC automatic.
63567
That is wrong configuration. You have told the receiver it is connected to two different motorised dishes.
You only have one cable to the dish. You cannot split a Universal satellite signal. Just set one tuner until you install/connect the other signal wire. Leave the rest in FBC automatic.
63567
Abu -
tuners c-h are automatic.
the tuner B (input 2) has no option for setting to automatic?
So I have this one to diasbled.
Is the above correct?
abu baniaz
27-03-22, 03:07
That will be fine. If you continue to have issues, double check the faceplate is not blocking any frequencies. Might be easier to bypass it.
Thank Abu thats very helpfull:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.