courtney
08-01-22, 10:35
Recently upgraded firmware on xtrend et8500 + softcams. Have a diseqc setup. Treated myself to Dolby Atmos soundbar and decided to run satbox via the soundbars HDMI inputs rather than thru TV. This setup seems to work best with audio settings in openvix set to AC3 and DTS passthrough as then soundbar outputs Dolby Surround. Can watch Sky.De just fine but if i switch to any Movistar+ channels(both 19.2 e) then audio will not output and the same on 23.5E with Ziggo Sports hd. When i check "information" on each channel in openvix settings they all seem ok.
Changing settings to AC3 /DTS downmix just loses audio completely. This does seem to be the best setup,connecting via soundbar as connecting satbox via Tv Hdmi just gave audio lag. As audio codecs seem to be same on all the channels i have tried ,i cannot see where the problem lies. This might be soundbar problem if it is codec issue as all worked fine before all upgrades. Anyone have any ideas?
Changing settings to AC3 /DTS downmix just loses audio completely. This does seem to be the best setup,connecting via soundbar as connecting satbox via Tv Hdmi just gave audio lag. As audio codecs seem to be same on all the channels i have tried ,i cannot see where the problem lies. This might be soundbar problem if it is codec issue as all worked fine before all upgrades. Anyone have any ideas?