HELP Reset emmc gigablue uhd quad 4k

[satellino]

Hi guys,
I just bought a new Gigablue UHD Quad 4K, with preinstalled the latest OpenVix image.
Then I've installed the Teamblue image myself.
After playing a little bit with the Teamblue image I've installed also the OpenATV image.
Now I from the Multiboot option I do see only Openvix on slot 1 and OpenATV on slot 2 and
a third slot still available. But there is no sign of the slot with Teamblue. Where it is?

Please can someone advise me on how to reset from the scratch the EMMC?
Thanks a lot

[twol]

Hi guys,
I just bought a new Gigablue UHD Quad 4K, with preinstalled the latest OpenVix image.
Then I've installed the Teamblue image myself.
After playing a little bit with the Teamblue image I've installed also the OpenATV image.
Now I from the Multiboot option I do see only Openvix on slot 1 and OpenATV on slot 2 and
a third slot still available. But there is no sign of the slot with Teamblue. Where it is?

Please can someone advise me on how to reset from the scratch the EMMC?
Thanks a lot
Can only think you overwrote with OpenATV image.
What do you mean by reset?
You can flash a slot which will overwrite any installed image in that slot or in many images (certainly in OpenViX, delete the contents of a slot)
On the Giga4K boxes, usb flashing will not remove images in slots 2 & 3, just slot1

[satellino]

Can only think you overwrote with OpenATV image.
What do you mean by reset?
You can flash a slot which will overwrite any installed image in that slot or in many images (certainly in OpenViX, delete the contents of a slot)
On the Giga4K boxes, usb flashing will not remove images in slots 2 & 3, just slot1


Thanks twol! You were right! I did solve the problem, just deleting one slot and replacing the other one with the Teamblue again.
I thought the Gigablue had 4 slots, but I understand that it has only three slots.

One last thing:
I want to create a multiroom environment using as the main receiver the GIGABLUE UHD QUAD 4K -connected to the sat antenna - and as the second one the EDISION Mio 4K Plus on another room where I do not have access to any antenna cable. So basically I want my EDISION to receive the signal from the GIGABLUE. Do you think it would be possible? (I see you got both of the receivers).
Please can you indicate to me which thread talks about the subject? Or any other help from your personal experience will be much appreciated.
Thanks again!

[twol]

Providing you have internet access through lan(preferable) or wifi then tuner setup choose client server mode. Configure with your gb4k,s ip address and password … and thats it.

[satellino]

Providing you have internet access through lan(preferable) or wifi then tuner setup choose client server mode. Configure with your gb4k,s ip address and password … and thats it.

Sorry, on what image? Because I'm currently using TeamBlue and I did not see this feature.
Thanks

[twol]

OpenViX. OpenPli also have a version

[satellino]

Thanks twol! It works flawlessly !!!

I've tried (1) the client mode with Openvix and (2) the gbipboxclient plugin when on OpenATV. Either way, they work fine.
I was unsure what would happen if I change the channels on the Gigablue (which works as the server), would that stop the EDISION Mio 4K Plus (which is the client) to keep streaming the channel(s)?
Well, It seems that this doesn't affect the vision of any channel. Probably because -for the first time - I got a dual-tuner :-)