View Full Version : [VU+ Solo4K] usb drive
n this before but everything got deleted off my pen drive for no reason and since then I get this I have tried about 6 pen drives in the front or rear usb ports
62184
Have you done a format on windows pc first and format to fat32.
Power off box insert usb and power on and see if you can initialize the usb and when done you should see ext4
Is this usb going to be left in box permanently.
tried that and still the same it seems to initialize ok thanks for the reply
after i initialize it i still get this
62186
What are you trying to do with the stick, looking at the size I am guessing its for flashing, if so dont worry about initializing just format to fat 32 and copy your image over
use it for picons and epg but it keeps losing it in epg settings only hd or flash and picons get deleted also keep a back up on it but that gets deleted i can initializing it and flash using front usb it will work fine for a while then all gone and always got that error on it
62189
62190
sorry this one
62191
Your mount points look wrong. Your Internal disk (/dev/sda1) should be mounted as /media/hdd and the USB stick mounted as /media/usb surely? I presume you want to use the HDD for your recordings etc? You could also use it for EPG. The EPG is maintained in memory and only saved to HDD at shutdown or on reboot. If you have sufficient internal flash you could store the picons there. Otherwise specify a folder on the USB drive (mounted as /media/usb) to keep the picons. It's right not to keep picons on the HDD as it needs to spin up the disk to load them when you change channel.
wiped everything and flashed the box so a complete fresh install
62192
62193
ok this where i am at the moment managed to get box to flash from usb
the box will read usb if no media or if there is a movie on it
but still says error on initialize settings
i have 9 new pen drives all the same
not got a clue why
Use 8gb or less for flashing and follow the guides.
Are you using a mac or windows pc?
Can someone else check this on a Vu 4k.
I get a similar error on an Ultimo4k (5.5.013.010.P3 with the recent commit to HarddiskSetup.py), initially an external bus error and then initialise....
10:20:23.8401 [eRCDeviceInputDev] emit: 1
10:20:23.8413 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
10:20:23.8414 [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
10:20:23.8432 [Harddisk] [diskSize]: stat.f_blocks: 1903872 stat.f_bsize: 8192
10:20:23.8443 [Skin] Processing screen 'HarddiskSetup', position=(0, 0), size=(1920 x 1080) for module 'HarddiskSetup'.
10:20:23.8494 [Skin] Error in screen 'HarddiskSetup' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'! Please contact the skin's author!!
10:20:23.8499 Traceback (most recent call last):
10:20:23.8500 File "/usr/lib/enigma2/python/skin.py", line 1164, in processWidget
attributes = screen[wname].skinAttributes = []
10:20:23.8501 KeyError: 'initializetext'
10:20:23.8502
During handling of the above exception, another exception occurred:
10:20:23.8502 Traceback (most recent call last):
10:20:23.8503 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:23.8504 File "/usr/lib/enigma2/python/skin.py", line 1166, in processWidget
raise SkinError("Component with name '%s' was not found in skin of screen '%s'" % (wname, name))
10:20:23.8505 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'! Please contact the skin's author!
10:20:23.8567 [Skin] Processing screen 'SimpleSummary' from list 'HarddiskSetupSummary, ScreenSummary, HarddiskSetup_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:24.1760 [eInputDeviceInit] 0 160 (352) 1
10:20:24.1761 [eRCDeviceInputDev] emit: 0
10:20:24.1776 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
10:20:34.2737 [eInputDeviceInit] 1 18f (399) 1
10:20:34.2738 [eRCDeviceInputDev] emit: 1
10:20:34.2751 [InfoBarGenerics] Key: 399 (Make) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.2753 [ActionMap] Keymap 'ShortcutActions' -> Action = 'green'.
10:20:34.2754 [HarddiskSetup] answer: False
10:20:34.2776 [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
10:20:34.2936 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Do you really want to initialise this device?
All the data on the device will be lost!
You can continue watching TV while this is running.).10:20:34.2938
10:20:34.2974 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
10:20:34.2983 [Skin] Processing screen 'MessageBox_summary' from list 'MessageBoxSummary, ScreenSummary, MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:34.5040 [eInputDeviceInit] 0 18f (399) 1
10:20:34.5041 [eRCDeviceInputDev] emit: 0
10:20:34.5058 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.5909 [eInputDeviceInit] 1 18f (399) 1
10:20:34.5910 [eRCDeviceInputDev] emit: 1
10:20:34.5923 [InfoBarGenerics] Key: 399 (Make) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:34.5925 [ActionMap] Keymap 'MsgBoxActions' -> Action = 'alwaysOK'.
10:20:34.5973 [Harddisk] Initializing storage device...
10:20:34.5975 [Harddisk] [diskSize]: stat.f_blocks: 1903872 stat.f_bsize: 8192
10:20:34.5976 [Harddisk] Disk size: 15596 MB.
10:20:34.5977 [Harddisk] UnMountTask - init
10:20:34.5980 [Harddisk] Creating partition.
10:20:34.5981 [Harddisk] Creating filesystem.
10:20:34.5983 [Harddisk] Mounting storage device.
10:20:34.5984 [Harddisk] Initialization complete.
10:20:34.5985 [Harddisk] UnMountTask - prepare
10:20:34.6010 [eConsoleAppContainer] Starting umount
10:20:34.6016 [Task] execute: 0 umount -f /media/usb
10:20:34.6060 [Skin] Processing screen 'JobView', position=(0, 0), size=(1920 x 1080) for module 'JobView'.
10:20:34.6146 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6151 Traceback (most recent call last):
10:20:34.6152 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6153 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6153 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6155 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6157 Traceback (most recent call last):
10:20:34.6158 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6159 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6160 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6161 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6168 Traceback (most recent call last):
10:20:34.6169 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6170 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6170 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6172 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6174 Traceback (most recent call last):
10:20:34.6175 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6176 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6177 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6178 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6181 Traceback (most recent call last):
10:20:34.6182 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6183 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6183 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6185 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
10:20:34.6187 Traceback (most recent call last):
10:20:34.6188 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
10:20:34.6189 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
10:20:34.6189 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
10:20:34.6223 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
10:20:34.6262 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:34.7150 [eInputDeviceInit] 0 18f (399) 1
10:20:34.7151 [eRCDeviceInputDev] emit: 0
10:20:34.7171 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'.
10:20:35.8982 [eConsoleAppContainer] Starting hdparm
10:20:35.8997 [Task] execute: 0 hdparm -z /dev/sdb
10:20:35.9250 [Task] [Rereading partition table. b'\n/dev/sdb:\n']
10:20:35.9439 [Hotplug] Connection made.
10:20:35.9448 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
10:20:35.9456 [Hotplug] Connection lost.
10:20:35.9459 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.10:20:35.9459
10:20:35.9460 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
10:20:35.9461 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
10:20:35.9462 [Harddisk] Evaluating hotplug disconnected device...
10:20:35.9463 [Harddisk] Unmounting partition 'sdb1'.
10:20:35.9464 [Harddisk] Removing storage device 'sdb'.
10:20:35.9464 [Harddisk] Hotplug disconnection complete.
10:20:36.9273 [eConsoleAppContainer] Starting parted
10:20:36.9286 [Task] execute: 0 parted -a opt -s /dev/sdb mklabel gpt mkpart primary 0% 100%
10:20:38.3786 [Hotplug] Connection made.
10:20:38.3794 [Hotplug] Data received: 'ACTION=add'.
10:20:38.3800 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1'.
10:20:38.3805 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
10:20:38.3812 [Hotplug] Connection lost.
10:20:38.3814 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.10:20:38.3815
10:20:38.3815 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
10:20:38.3816 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
10:20:38.3817 [Harddisk] Evaluating hotplug connected device...
10:20:38.3817 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
10:20:38.3842 [Harddisk] Found storage device 'sdb1' (Removable = True).
10:20:38.3860 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
10:20:38.3863 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host3/target3:0:0/3:0:0:0'.
10:20:38.3872 main infobar is not execing... so we ignore hotplug event!
10:20:38.3877 [Harddisk] Hotplug connection complete.
10:20:39.2070 [eConsoleAppContainer] Starting mkfs.ext4
10:20:39.2085 [Task] execute: 0 mkfs.ext4 -T largefile -N 499072 -m0 -O dir_index /dev/sdb1
10:20:39.2153 [Harddisk] MkfsTask - [Mkfs] mke2fs 1.45.6 (20-Mar-2020)
10:20:39.2154
10:20:40.0401 [Harddisk] MkfsTask - [Mkfs] /dev/sdb1 is mounted; will not make a filesystem here!
10:20:40.0402
10:20:40.0404 [Task] >>> Error: [<Components.Task.ReturncodePostcondition object at 0xb045dec8>]
10:20:40.0414 [Task] job Components.Task.Job name=Initializing storage device... #tasks=9 completed with [<Components.Task.ReturncodePostcondition object at 0xb045dec8>] in Components.Task.Task name=Creating filesystem.
10:20:40.0416 [Task] unrecoverable task failure
10:20:40.0417 Initializing storage device...
Error: mke2fs 1.45.6 (20-Mar-2020)
/dev/sdb1 is mounted; will not make a filesystem here!10:20:40.0417
10:20:40.0441 [Skin] Processing screen 'MessageBoxSimple' from list 'MessageBoxSimple, MessageBox', position=(480, 532), size=(960 x 15) for module 'MessageBox'.
10:20:40.0546 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Initializing storage device...
Error: mke2fs 1.45.6 (20-Mar-2020)
/dev/sdb1 is mounted; will not make a filesystem here!).10:20:40.0547
10:20:40.0554 [Pixmap] setPixmapNum(3) failed! defined pixmaps: []
10:20:40.0577 [Skin] Processing screen 'MessageBoxSimple_summary' from list 'MessageBoxSimpleSummary, MessageBoxSummary, ScreenSummary, MessageBoxSimple_summary, MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
10:20:40.0596 [Task] not retrying job.
10:20:40.0654 [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
10:20:51.6181 [eDVBVideo0] VIDEO_GET_EVENT PROGRESSIVE_CHANGED 1
10:20:52.1201 [VideoHardware] setting aspect: 16:9
10:20:52.1205 [VideoHardware] setting wss: auto
10:20:52.1207 [VideoHardware] setting policy: panscan
Unmounting /media/usb allows it to be initialised ok.
Still shows as error in menu/information/devices, even after a reboot, but telnet and FileZilla access to /media/usb is ok.
A filesystem check on /media/usb crashed...
11:20:01.1065 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
11:20:01.1066 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
11:20:01.1100 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
11:20:01.1139 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
11:20:01.1195 [Task] [Unmount. b"umount: can't unmount /media/usb: Device or resource busy\n"]
11:20:01.1204 [Harddisk] UnmountTask - Error: Failed to remove path '/media/usb': [Errno 16] Device or resource busy: '/media/usb'
11:20:01.1207 [Task] >>> Error: [<Components.Task.ReturncodePostcondition object at 0xb0496388>, <Components.Task.ReturncodePostcondition object at 0xb0467f70>]
11:20:01.1226 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [<Components.Task.ReturncodePostcondition object at 0xb0496388>, <Components.Task.ReturncodePostcondition object at 0xb0467f70>] in Components.Task.Task name=Unmount.
11:20:01.1231 Traceback (most recent call last):
11:20:01.1231 File "/usr/lib/enigma2/python/Components/Task.py", line 230, in processFinished
11:20:01.1249 self.finish()
11:20:01.1251 File "/usr/lib/enigma2/python/Components/Task.py", line 247, in finish
11:20:01.1262 self.callback(self, not_met)
11:20:01.1265 File "/usr/lib/enigma2/python/Components/Task.py", line 95, in taskCallback
11:20:01.1272 self.callback(self, task, res)
11:20:01.1274 File "/usr/lib/enigma2/python/Components/Task.py", line 402, in jobDone
11:20:01.1284 if not job.onFail(job, task, problems):
11:20:01.1286 File "/usr/lib/enigma2/python/Components/Task.py", line 395, in notifyFailed
11:20:01.1296 print("[Task] unrecoverable task failure\n", job.name + "\n" + _("Error") + ': %s' % (problems[0].getErrorMessage(task)))
11:20:01.1297 File "/usr/lib/enigma2/python/Components/Task.py", line 548, in getErrorMessage
11:20:01.1306 log = ''.join(task.log).strip()
11:20:01.1307 TypeError: sequence item 0: expected str instance, bytes found
11:20:01.1308 [ePyObject] (CallObject(<bound method Task.processFinished of <Components.Harddisk.UnmountTask object at 0xb0467be0>>,(1,)) failed)
I see the same. Fully functional but shows an error. Can anyone not using a Vu 4k see the error?
... just edited my previous post.
log = ''.join(task.log).strip()
Try:
log = b''.join(task.log).strip()
... no longer crashes, there's no report on the screen when the check finishes.
11:55:06.7069 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
11:55:06.7182 [eConsoleAppContainer] Starting fsck.ext4
11:55:06.7191 [Task] execute: 0 fsck.ext4 -f -p /dev/sdb1
11:55:07.0100 [eInputDeviceInit] 0 160 (352) 1
11:55:07.0101 [eRCDeviceInputDev] emit: 0
11:55:07.0119 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
11:55:07.0442 [Task] [Checking disk. b'/dev/sdb1: 13/954720 files (0.0% non-contiguous), 86596/3812199 blocks\n']
11:55:07.0547 [Harddisk] MountTask - prepare
11:55:07.0550 [Harddisk] MountTask - Error: Failed to remove '/dev/nomount' file: [Errno 2] No such file or directory: '/dev/nomount.sdb'
11:55:07.0575 [Harddisk] MountTask - let udev complete the job
11:55:07.0577 [eConsoleAppContainer] Starting /bin/sh
11:55:07.0581 [Task] execute: 0 sleep 2; hdparm -z /dev/sdb
11:55:09.1051 [Task] [Mount. b'\n/dev/sdb:\n']
11:55:09.1103 [Hotplug] Connection made.
11:55:09.1114 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
11:55:09.1122 [Hotplug] Connection lost.
11:55:09.1124 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.11:55:09.1125
11:55:09.1126 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
11:55:09.1127 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
11:55:09.1127 [Harddisk] Evaluating hotplug disconnected device...
11:55:09.1128 [Harddisk] Unmounting partition 'sdb1'.
11:55:09.1131 main infobar is not execing... so we ignore hotplug event!
11:55:09.1136 [Harddisk] Removing storage device 'sdb'.
11:55:09.1137 [Harddisk] Hotplug disconnection complete.
11:55:09.2952 [Hotplug] Connection made.
11:55:09.2960 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
11:55:09.2969 [Hotplug] Connection lost.
11:55:09.2971 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.11:55:09.2971
11:55:09.2972 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
11:55:09.2973 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
11:55:09.2975 [Harddisk] Evaluating hotplug connected device...
11:55:09.2975 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
11:55:09.2996 [Harddisk] Found storage device 'sdb1' (Removable = True).
11:55:09.3012 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
11:55:09.3019 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
11:55:09.3038 main infobar is not execing... so we ignore hotplug event!
11:55:09.3043 [Harddisk] Hotplug connection complete.
11:55:10.1113 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [] in None
11:55:17.1019 [eInputDeviceInit] 1 8b (139) 1
11:55:17.1020 [eRCDeviceInputDev] emit: 1
11:55:17.1036 [InfoBarGenerics] Key: 139 (Make) KeyID='KEY_MENU' Binding='('MENU',)'.
11:55:17.1038 [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
11:55:17.1066 [Skin] Processing screen 'menu_mainmenu' from list 'menu_mainmenu, Menu', position=(0, 0), size=(1920 x 1080) for module 'MainMenu'.
11:55:17.1195 [Skin] Processing screen 'MenuSummary' from list 'menu_mainmenuSummary, MenuSummary, ScreenSummary, menu_mainmenu_summary, Menu_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'MenuSummary'.
11:55:17.4381 [eInputDeviceInit] 0 8b (139) 1
11:55:17.4382 [eRCDeviceInputDev] emit: 0
11:55:17.4398 [InfoBarGenerics] Key: 139 (Break) KeyID='KEY_MENU' Binding='('MENU',)'.
11:55:19.4406 [eInputDeviceInit] 1 ae (174) 1
11:55:19.4406 [eRCDeviceInputDev] emit: 1
11:55:19.4421 [InfoBarGenerics] Key: 174 (Make) KeyID='KEY_EXIT' Binding='('EXIT',)'.
11:55:19.7769 [eInputDeviceInit] 0 ae (174) 1
11:55:19.7770 [eRCDeviceInputDev] emit: 0
11:55:19.7783 [InfoBarGenerics] Key: 174 (Break) KeyID='KEY_EXIT' Binding='('EXIT',)'.
11:55:19.7784 [ActionMap] Keymap 'OkCancelActions' -> Action = 'cancel'.
So can you try this change to Harddisk.... copy to /usr/lib/enigma2/python/Components(Before copying: in putty init 4, after copying: in putty init 6)
Looks the same, shows "error" in information/devices, but I can move recordings to the usb location and play them.
Tried formatting and then filesystem check....
15:25:10.7062 [eInputDeviceInit] 1 160 (352) 1
15:25:10.7063 [eRCDeviceInputDev] emit: 1
15:25:10.7078 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
15:25:10.7079 [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
15:25:10.7126 [Harddisk] Checking filesystem...
15:25:10.7128 [Harddisk] UnMountTask - init
15:25:10.7150 [Harddisk] Filesystem type is 'ext4'.
15:25:10.7153 [Harddisk] Check complete.
15:25:10.7154 [Harddisk] UnMountTask - prepare
15:25:10.7176 [eConsoleAppContainer] Starting umount
15:25:10.7182 [Task] execute: 0 umount -f /media/usb
15:25:10.7223 [Skin] Processing screen 'JobView', position=(0, 0), size=(1920 x 1080) for module 'JobView'.
15:25:10.7302 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7306 Traceback (most recent call last):
15:25:10.7307 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7308 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7309 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7311 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7313 Traceback (most recent call last):
15:25:10.7314 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7315 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7316 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7317 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7319 Traceback (most recent call last):
15:25:10.7320 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7321 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7322 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7323 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7326 Traceback (most recent call last):
15:25:10.7327 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7327 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7328 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7329 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7332 Traceback (most recent call last):
15:25:10.7333 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7333 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7334 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7335 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
15:25:10.7338 Traceback (most recent call last):
15:25:10.7339 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:25:10.7340 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:25:10.7341 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
15:25:10.7373 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
15:25:10.7412 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:25:10.7505 [eConsoleAppContainer] Starting fsck.ext4
15:25:10.7522 [Task] execute: 0 fsck.ext4 -f -p /dev/sdb1
15:25:11.0427 [eInputDeviceInit] 0 160 (352) 1
15:25:11.0428 [eRCDeviceInputDev] emit: 0
15:25:11.0444 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:25:11.0863 [Task] [Checking disk. b'/dev/sdb1: 13/954720 files (0.0% non-contiguous), 86596/3812199 blocks\n']
15:25:11.0969 [Harddisk] MountTask - prepare
15:25:11.0971 [Harddisk] MountTask - Error: Failed to remove '/dev/nomount' file: [Errno 2] No such file or directory: '/dev/nomount.sdb'
15:25:11.0997 [Harddisk] MountTask - let udev complete the job
15:25:11.0999 [eConsoleAppContainer] Starting /bin/sh
15:25:11.1003 [Task] execute: 0 sleep 2; hdparm -z /dev/sdb
15:25:13.1483 [Task] [Mount. b'\n/dev/sdb:\n']
15:25:13.1558 [Hotplug] Connection made.
15:25:13.1573 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
15:25:13.1597 [Hotplug] Connection lost.
15:25:13.1600 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.15:25:13.1601
15:25:13.1602 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
15:25:13.1603 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
15:25:13.1604 [Harddisk] Evaluating hotplug disconnected device...
15:25:13.1605 [Harddisk] Unmounting partition 'sdb1'.
15:25:13.1608 main infobar is not execing... so we ignore hotplug event!
15:25:13.1615 [Harddisk] Removing storage device 'sdb'.
15:25:13.1616 [Harddisk] Hotplug disconnection complete.
15:25:13.3394 [Hotplug] Connection made.
15:25:13.3403 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
15:25:13.3417 [Hotplug] Connection lost.
15:25:13.3420 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.15:25:13.3420
15:25:13.3421 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
15:25:13.3422 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
15:25:13.3422 [Harddisk] Evaluating hotplug connected device...
15:25:13.3423 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
15:25:13.3444 [Harddisk] Found storage device 'sdb1' (Removable = True).
15:25:13.3461 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
15:25:13.3464 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
15:25:13.3485 main infobar is not execing... so we ignore hotplug event!
15:25:14.1546 [Task] job Components.Task.Job name=Checking filesystem... #tasks=4 completed with [] in None
15:25:18.8591 [eInputDeviceInit] 1 8b (139) 1
15:25:18.8592 [eRCDeviceInputDev] emit: 1
15:25:18.8609 [InfoBarGenerics] Key: 139 (Make) KeyID='KEY_MENU' Binding='('MENU',)'.
15:25:18.8610 [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
15:25:18.8638 [Skin] Processing screen 'menu_mainmenu' from list 'menu_mainmenu, Menu', position=(0, 0), size=(1920 x 1080) for module 'MainMenu'.
15:25:18.8763 [Skin] Processing screen 'MenuSummary' from list 'menu_mainmenuSummary, MenuSummary, ScreenSummary, menu_mainmenu_summary, Menu_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'MenuSummary'.
15:25:19.1947 [eInputDeviceInit] 0 8b (139) 1
15:25:19.1948 [eRCDeviceInputDev] emit: 0
15:25:19.1963 [InfoBarGenerics] Key: 139 (Break) KeyID='KEY_MENU' Binding='('MENU',)'.
15:25:22.1859 [eInputDeviceInit] 1 67 (103) 1
15:25:22.1860 [eRCDeviceInputDev] emit: 1
15:25:22.1875 [InfoBarGenerics] Key: 103 (Make) KeyID='KEY_UP' Binding='('UP',)'.
15:25:22.5216 [eInputDeviceInit] 0 67 (103) 1
15:25:22.5217 [eRCDeviceInputDev] emit: 0
15:25:22.5233 [InfoBarGenerics] Key: 103 (Break) KeyID='KEY_UP' Binding='('UP',)'.
NB I'm using the P3 image.
Apart from skin errors (which are not important) that looks OK.
Can you run a menu/setup/storage/Initialise Devices by itself and post the log?
15:57:58.2574 [eRCDeviceInputDev] emit: 0
15:57:58.2590 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:58:00.3530 [eInputDeviceInit] 1 6c (108) 1
15:58:00.3531 [eRCDeviceInputDev] emit: 1
15:58:00.3545 [InfoBarGenerics] Key: 108 (Make) KeyID='KEY_DOWN' Binding='('DOWN',)'.
15:58:00.6894 [eInputDeviceInit] 0 6c (108) 1
15:58:00.6894 [eRCDeviceInputDev] emit: 0
15:58:00.6909 [InfoBarGenerics] Key: 108 (Break) KeyID='KEY_DOWN' Binding='('DOWN',)'.
15:58:02.0419 [eInputDeviceInit] 1 160 (352) 1
15:58:02.0420 [eRCDeviceInputDev] emit: 1
15:58:02.0434 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
15:58:02.0435 [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
15:58:02.0482 [Harddisk] [diskSize]: stat.f_blocks: 243889659 stat.f_bsize: 4096
15:58:02.0488 [Harddisk] [diskSize]: stat.f_blocks: 3764538 stat.f_bsize: 4096
15:58:02.0492 [Skin] Processing screen 'HarddiskSelection', position=(0, 0), size=(1920 x 1080) for module 'HarddiskSelection'.
15:58:02.0595 [Skin] Processing screen 'SimpleSummary' from list 'HarddiskSelectionSummary, ScreenSummary, HarddiskSelection_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:58:02.3784 [eInputDeviceInit] 0 160 (352) 1
15:58:02.3785 [eRCDeviceInputDev] emit: 0
15:58:02.3801 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:58:03.0978 [eInputDeviceInit] 1 6c (108) 1
15:58:03.0979 [eRCDeviceInputDev] emit: 1
15:58:03.0993 [InfoBarGenerics] Key: 108 (Make) KeyID='KEY_DOWN' Binding='('DOWN',)'.
15:58:03.5394 [eInputDeviceInit] 0 6c (108) 1
15:58:03.5395 [eRCDeviceInputDev] emit: 0
15:58:03.5409 [InfoBarGenerics] Key: 108 (Break) KeyID='KEY_DOWN' Binding='('DOWN',)'.
15:58:05.1682 [eInputDeviceInit] 1 160 (352) 1
15:58:05.1682 [eRCDeviceInputDev] emit: 1
15:58:05.1695 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
15:58:05.1696 [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
15:58:05.1713 [Harddisk] [diskSize]: stat.f_blocks: 3764538 stat.f_bsize: 4096
15:58:05.1719 [Skin] Processing screen 'HarddiskSetup', position=(0, 0), size=(1920 x 1080) for module 'HarddiskSetup'.
15:58:05.1770 [Skin] Error in screen 'HarddiskSetup' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'! Please contact the skin's author!!
15:58:05.1805 Traceback (most recent call last):
15:58:05.1806 File "/usr/lib/enigma2/python/skin.py", line 1164, in processWidget
attributes = screen[wname].skinAttributes = []
15:58:05.1807 KeyError: 'initializetext'
15:58:05.1808
During handling of the above exception, another exception occurred:
15:58:05.1809 Traceback (most recent call last):
15:58:05.1810 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:05.1810 File "/usr/lib/enigma2/python/skin.py", line 1166, in processWidget
raise SkinError("Component with name '%s' was not found in skin of screen '%s'" % (wname, name))
15:58:05.1811 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: Component with name 'initializetext' was not found in skin of screen 'HarddiskSetup'! Please contact the skin's author!
15:58:05.1879 [Skin] Processing screen 'SimpleSummary' from list 'HarddiskSetupSummary, ScreenSummary, HarddiskSetup_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:58:05.5044 [eInputDeviceInit] 0 160 (352) 1
15:58:05.5045 [eRCDeviceInputDev] emit: 0
15:58:05.5064 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:58:07.5660 [eInputDeviceInit] 1 18f (399) 1
15:58:07.5661 [eRCDeviceInputDev] emit: 1
15:58:07.5675 [InfoBarGenerics] Key: 399 (Make) KeyID='KEY_GREEN' Binding='('GREEN',)'.
15:58:07.5677 [ActionMap] Keymap 'ShortcutActions' -> Action = 'green'.
15:58:07.5677 [HarddiskSetup] answer: False
15:58:07.5698 [Skin] Processing screen 'MessageBox', position=(0, 0), size=(1920 x 1080) for module 'MessageBox'.
15:58:07.5881 [Screen] Warning: Skin is missing element 'icon' in <class 'Screens.MessageBox.MessageBox'>(Do you really want to initialise this device?
All the data on the device will be lost!
You can continue watching TV while this is running.).15:58:07.5882
15:58:07.5915 [Pixmap] setPixmapNum(0) failed! defined pixmaps: []
15:58:07.5924 [Skin] Processing screen 'MessageBox_summary' from list 'MessageBoxSummary, ScreenSummary, MessageBox_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:58:08.0073 [eInputDeviceInit] 0 18f (399) 1
15:58:08.0074 [eRCDeviceInputDev] emit: 0
15:58:08.0090 [InfoBarGenerics] Key: 399 (Break) KeyID='KEY_GREEN' Binding='('GREEN',)'.
15:58:10.0372 [eInputDeviceInit] 1 160 (352) 1
15:58:10.0372 [eRCDeviceInputDev] emit: 1
15:58:10.0386 [InfoBarGenerics] Key: 352 (Make) KeyID='KEY_OK' Binding='('OK',)'.
15:58:10.0387 [ActionMap] Keymap 'MsgBoxActions' -> Action = 'ok'.
15:58:10.0431 [Harddisk] Initializing storage device...
15:58:10.0436 [Harddisk] [diskSize]: stat.f_blocks: 3764538 stat.f_bsize: 4096
15:58:10.0436 [Harddisk] Disk size: 15419 MB.
15:58:10.0438 [Harddisk] UnMountTask - init
15:58:10.0441 [Harddisk] Creating partition.
15:58:10.0442 [Harddisk] UnMountTask - init
15:58:10.0443 [Harddisk] Creating filesystem.
15:58:10.0445 [Harddisk] Mounting storage device.
15:58:10.0446 [Harddisk] Initialization complete.
15:58:10.0447 [Harddisk] UnMountTask - prepare
15:58:10.0472 [eConsoleAppContainer] Starting umount
15:58:10.0478 [Task] execute: 0 umount -f /media/usb
15:58:10.0522 [Skin] Processing screen 'JobView', position=(0, 0), size=(1920 x 1080) for module 'JobView'.
15:58:10.0597 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0600 Traceback (most recent call last):
15:58:10.0602 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0602 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0603 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0605 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0607 Traceback (most recent call last):
15:58:10.0608 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0609 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0609 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'cancelable' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0611 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0613 Traceback (most recent call last):
15:58:10.0614 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0615 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0616 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0617 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0620 Traceback (most recent call last):
15:58:10.0621 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0621 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0622 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'finished' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0624 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0626 Traceback (most recent call last):
15:58:10.0627 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0627 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0629 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0630 [Skin] Error in screen 'JobView' widget 'widget' [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!!
15:58:10.0636 Traceback (most recent call last):
15:58:10.0637 File "/usr/lib/enigma2/python/skin.py", line 1264, in processScreen
p(w, context)
15:58:10.0638 File "/usr/lib/enigma2/python/skin.py", line 1193, in processWidget
raise SkinError("The source '%s' was not found in screen '%s'" % (wsource, name))
15:58:10.0638 skin.SkinError: [Skin] {Simple_Ten_Eighty/skin.xml}: The source 'backgroundable' was not found in screen 'JobView'! Please contact the skin's author!
15:58:10.0671 [Screen] Warning: Skin is missing element 'HelpWindow' in <class 'Screens.TaskView.JobView'>.
15:58:10.0710 [Skin] Processing screen 'JobView_summary' from list 'JobViewSummary, ScreenSummary, JobView_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'ScreenSummary'.
15:58:10.1162 [eConsoleAppContainer] Starting hdparm
15:58:10.1168 [Task] execute: 0 hdparm -z /dev/sdb
15:58:10.1394 [Task] [Rereading partition table. b'\n/dev/sdb:\n']
15:58:10.1635 [Hotplug] Connection made.
15:58:10.1651 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
15:58:10.1692 [Hotplug] Connection lost.
15:58:10.1696 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.15:58:10.1696
15:58:10.1697 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
15:58:10.1698 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
15:58:10.1699 [Harddisk] Evaluating hotplug disconnected device...
15:58:10.1700 [Harddisk] Unmounting partition 'sdb1'.
15:58:10.1702 main infobar is not execing... so we ignore hotplug event!
15:58:10.1708 [Harddisk] Removing storage device 'sdb'.
15:58:10.1709 [Harddisk] Hotplug disconnection complete.
15:58:10.3733 [eInputDeviceInit] 0 160 (352) 1
15:58:10.3734 [eRCDeviceInputDev] emit: 0
15:58:10.3750 [InfoBarGenerics] Key: 352 (Break) KeyID='KEY_OK' Binding='('OK',)'.
15:58:11.1416 [eConsoleAppContainer] Starting parted
15:58:11.1430 [Task] execute: 0 parted -a opt -s /dev/sdb mklabel gpt mkpart primary 0% 100%
15:58:12.1634 [Hotplug] Connection made.
15:58:12.1642 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
15:58:12.1651 [Hotplug] Connection lost.
15:58:12.1653 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.15:58:12.1654
15:58:12.1654 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
15:58:12.1655 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
15:58:12.1656 [Harddisk] Evaluating hotplug connected device...
15:58:12.1656 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
15:58:12.1677 [Harddisk] Found storage device 'sdb1' (Removable = True).
15:58:12.1693 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
15:58:12.1696 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
15:58:12.1715 main infobar is not execing... so we ignore hotplug event!
15:58:12.9795 [Harddisk] UnMountTask - prepare
15:58:12.9822 [eConsoleAppContainer] Starting umount
15:58:12.9827 [Task] execute: 0 umount -f /media/usb
15:58:13.0674 [eConsoleAppContainer] Starting mkfs.ext4
15:58:13.0689 [Task] execute: 0 mkfs.ext4 -T largefile -N 493408 -m0 -O dir_index /dev/sdb1
15:58:13.0763 [Harddisk] MkfsTask - [Mkfs] mke2fs 1.45.6 (20-Mar-2020)
15:58:13.0764
15:58:13.0856 [Harddisk] MkfsTask - [Mkfs] Suggestion: Use Linux kernel >= 3.18 for improved stability of the metadata and journal checksum features.
15:58:13.0856
15:58:13.0889 [Harddisk] MkfsTask - [Mkfs] Creating filesystem with 3811840 4k blocks and 494208 inodes
Filesystem UUID: 30f7d600-63f3-4d68-8e50-a422f9896275
Superblock backups stored on blocks:
32768, 15:58:13.0890
15:58:13.0891 [Harddisk] MkfsTask - [Mkfs] 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
Allocating group tables: 0/11715:58:13.0891
15:58:13.0896 [Harddisk] MkfsTask - [Mkfs] done
15:58:13.0897
15:58:13.0899 [Harddisk] MkfsTask - [Mkfs] Writing inode tables: 0/117
15:58:13.0900 [Harddisk] MkfsTask - [Mkfs] done
15:58:13.0901
15:58:13.1019 [Harddisk] MkfsTask - [Mkfs] Creating journal (16384 blocks):
15:58:13.2398 [Harddisk] MkfsTask - [Mkfs] done
Writing superblocks and filesystem accounting information: 15:58:13.2399
15:58:13.2410 [Harddisk] MkfsTask - [Mkfs] 0/117
15:58:13.2656 [Harddisk] MkfsTask - [Mkfs]
15:58:41.3995 [Harddisk] MkfsTask - [Mkfs] done
15:58:41.3997
15:58:41.4006 [Harddisk] MountTask - prepare
15:58:41.4008 [Harddisk] MountTask - Error: Failed to remove '/dev/nomount' file: [Errno 2] No such file or directory: '/dev/nomount.sdb'
15:58:41.4035 [Harddisk] MountTask - let udev complete the job
15:58:41.4037 [eConsoleAppContainer] Starting /bin/sh
15:58:41.4042 [Task] execute: 0 sleep 2; hdparm -z /dev/sdb
15:58:43.4592 [Hotplug] Connection made.
15:58:43.4602 [Hotplug] Data received: 'ACTION=remove, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block//device'.
15:58:43.4614 [Hotplug] Connection lost.
15:58:43.4617 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}.15:58:43.4618
15:58:43.4618 [Hotplug] DEBUG: {'ACTION': 'remove', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block//device'}
15:58:43.4619 [Hotplug] DEBUG: device = /dev/sdb1 action = remove mediaState = None physDevPath = /block//device dev = sdb1
15:58:43.4620 [Harddisk] Evaluating hotplug disconnected device...
15:58:43.4621 [Harddisk] Unmounting partition 'sdb1'.
15:58:43.4625 main infobar is not execing... so we ignore hotplug event!
15:58:43.4631 [Harddisk] Removing storage device 'sdb'.
15:58:43.4632 [Harddisk] Hotplug disconnection complete.
15:58:43.4753 [Task] [Mount. b'\n/dev/sdb:\n']
15:58:43.6781 [Hotplug] Connection made.
15:58:43.6790 [Hotplug] Data received: 'ACTION=add, DEVPATH=/dev/sdb1, PHYSDEVPATH=/block/sdb/device'.
15:58:43.6799 [Hotplug] Connection lost.
15:58:43.6802 [Hotplug] Calling processHotplugData, reason = [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionDone'>: Connection was closed cleanly.
] eventData = {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}.15:58:43.6802
15:58:43.6803 [Hotplug] DEBUG: {'ACTION': 'add', 'DEVPATH': '/dev/sdb1', 'PHYSDEVPATH': '/block/sdb/device'}
15:58:43.6804 [Hotplug] DEBUG: device = /dev/sdb1 action = add mediaState = None physDevPath = /block/sdb/device dev = sdb1
15:58:43.6805 [Harddisk] Evaluating hotplug connected device...
15:58:43.6805 [Harddisk] DEBUG: device = 'sdb1', physDevice = '/block/sdb/device'
15:58:43.6827 [Harddisk] Found storage device 'sdb1' (Removable = True).
15:58:43.6843 [Harddisk] Device 'sdb' (External (ERROR) - Kingston (DataTraveler 2.0)) -> '/dev/sdb' -> '/dev/sdb'.
15:58:43.6846 [Harddisk] Found partition 'sdb1', description = 'DataTraveler 2.0 (Partition 1)', device = '/sys/devices/rdb.3/f0470300.ehci_v2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0'.
15:58:43.6867 main infobar is not execing... so we ignore hotplug event!
15:58:44.4813 [Task] job Components.Task.Job name=Initializing storage device... #tasks=10 completed with [] in None
15:58:47.2682 [eInputDeviceInit] 1 74 (116) 1
15:58:47.2682 [eRCDeviceInputDev] emit: 1
15:58:47.2698 [InfoBarGenerics] Key: 116 (Make) KeyID='KEY_POWER' Binding='('POWER',)'.
15:58:47.2700 [ActionMap] Keymap 'GlobalActions' -> Action = 'power_down'.
15:58:47.6043 [eInputDeviceInit] 0 74 (116) 1
15:58:47.6044 [eRCDeviceInputDev] emit: 0
15:58:47.6058 [InfoBarGenerics] Key: 116 (Break) KeyID='KEY_POWER' Binding='('POWER',)'.
15:58:47.6141 [AVSwitch] portlist is ['HDMI']
15:58:47.6188 [Standby] enter standby
15:58:47.6201 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:4484:4089:233A:EEEE0000:0:0:0:
15:58:47.6202 [eDVBCAService] free service 1:0:19:4484:4089:233A:EEEE0000:0:0:0:
15:58:47.6298 [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
15:58:47.6299 [eDVBPCR0] DEMUX_STOP ok
15:58:47.6299 [eDVBPCR0] destroy
15:58:47.6300 [eDVBVideo0] DEMUX_STOP ok
15:58:47.6341 [eDVBVideo0] VIDEO_STOP ok
15:58:47.6377 [eDVBVideo0] destroy
15:58:47.6378 [eDVBAudio0] AUDIO_STOP ok
15:58:47.6455 [eDVBAudio0] DEMUX_STOP ok
15:58:47.6456 [eDVBAudio0] AUDIO_CONTINUE ok
15:58:47.6543 [eDVBAudio0] destroy
15:58:47.6543 [decoder][eDVBText] resetPID
15:58:47.6543 [decoder][eDVBText] freeCache
15:58:47.6562 [eDVBResourceManager] start release channel timer
15:58:47.7449 [Skin] Processing screen 'Standby', position=(0, 0), size=(1920 x 1080) for module 'Standby'.
15:58:47.7516 [Skin] Processing screen 'StandbySummary' from list 'StandbySummary, ScreenSummary, Standby_summary, SimpleSummary', position=(0, 0), size=(800 x 480) for module 'StandbySummary'.
15:58:47.7571 [eDboxLCD] setLCDBrightness 25
15:58:47.8070 [eInputDeviceInit] 1 ae (174) 1
15:58:47.8071 [eRCDeviceInputDev] emit: 1
15:58:47.8085 [InfoBarGenerics] Key: 174 (Make) KeyID='KEY_EXIT' Binding='('EXIT',)'.
Thanks - that is OK, the device was re- partitioned and then format ran to completion.
error on an Ultimo4k (5.5.013.010.P3 with the recent commit to HarddiskSetup.py)Can you please reflash to 5.5.013.013.Py3.
Online update is not available as this is a new build of branch 5.0 (Py3.9.5).
Can you please reflash to 5.5.013.013.Py3.
Online update is not available as this is a new build of branch 5.0 (Py3.9.5).
Bit stuffed with that one, Restore Wizard doesn't kick in, just a blank screen.
< 46.3945> 16:43:49.4969 [eInputDeviceInit] 1 160 (352) 1
< 46.3946> 16:43:49.4969 [eRCDeviceInputDev] emit: 1
< 46.3948> 16:43:49.4972 [ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
< 46.3951> 16:43:49.4974 Traceback (most recent call last):
< 46.3951> 16:43:49.4975 File "/usr/lib/enigma2/python/Components/ActionMap.py", line 80, in action
< 46.3962> 16:43:49.4986 return ActionMap.action(self, contexts, action)
< 46.3963> 16:43:49.4986 File "/usr/lib/enigma2/python/Components/ActionMap.py", line 60, in action
< 46.3966> 16:43:49.4989 res = self.actions[action]()
< 46.3966> 16:43:49.4990 File "/usr/lib/enigma2/python/Screens/Wizard.py", line 384, in ok
< 46.3980> 16:43:49.5004 self.finished()
< 46.3981> 16:43:49.5005 File "/usr/lib/enigma2/python/Screens/Wizard.py", line 340, in finished
< 46.3987> 16:43:49.5011 nextStep = self["list"].current[1]
< 46.3988> 16:43:49.5011 TypeError: 'bool' object is not subscriptable
< 46.3989> 16:43:49.5012 [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xb10277f0>>,('WizardActions', 'ok')) failed)
... crashes with ok, "question" popup when I press exit.
Yes, I need to rebuild so it has the latest commits. I'll post back when done.
OK, its up there now.
I'm now running 5.5.013.014 (Py3), everything looks ok. The usb stick functions as expected , apart from still showing as "External (ERROR)".
(Harddisk.py and Task.py added as well.)
I'm using a usb 2.0 stick in a usb 3.0 slot.
5.5.013.014 ?????
I am on 5.4.012
I know, we're trying things out on a later release. Some of these posts probably need moving to their own thread.
Thanks for the reply and trying to fix it
Thanks alan
I see the same. Fully functional but shows an error. Can anyone not using a Vu 4k see the error?
ET10K running 5.4.009 (Release) works fine in every respect.
EDIT: still ok on 5.4.012 (Release).
Just updated Hardisk to remove ERROR in bus type (was invalid path check ) so should now be all clean on Git
Ultimo4K now looking fine. :thumbsup:
One inconsistency I still see on both boxes is this hotplug popup, which is not strictly correct as I can play recordings stored on the stick.
I guess it depends on what displayable means.
MediaScanner does the check.
Ultimo4K now looking fine. :thumbsup:
One inconsistency I still see on both boxes is this hotplug popup, which is not strictly correct as I can play recordings stored on the stick.
I guess it depends on what displayable means.
MediaScanner does the check.
I think that is looking for pictures e.g jpeg etc
I have seen that message from the year dot
I think that is looking for pictures e.g jpeg etc
I have seen that message from the year dot
I've never used a usb stick before, so messages like that can be a bit misleading. :)
"No displayable files on this medium found!"
Doesn't look very English.
"No displayable files found on this medium!"
Your mount points look wrong. Your Internal disk (/dev/sda1) should be mounted as /media/hdd and the USB stick mounted as /media/usb surely?That's probably a timing issue at boot time as to which one gets seen first. Differeing results seem to confuse the system.
I used to suffer from this (long ago).
The solution is to use the option* to configure where you wish each file-system to be mounted.
*Setup -> ViX -> Mount manager -> Setup mounts
Birdman is correct, setup your mounts correctly in MountManager and then it should be OK.
like this
62208
62209That is fixed.
ok thanks for the reply when will the fix be released
You can either retrive it from Github and install it yourself or wait for the next release build.
Will have to wait for next build do not know what to look for on Github best leave it alone but thanks for your help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.