New Drivers Update 20110214

[icewaere]

Drivers Update

20110214

-improve live streaming playback (and vtuner)
-VOB AC3 fix
-VOB lpcm fix
-rc long standby keypress detection fix (needs frontpanel ver: "a" update)
-hdmi CEC support (write/read commands to/from /dev/hdmi_cec, cec message format <address><length><data1>...<dataN>)
-avoid claming cdc devices
-improve video mode change detection speed

greetz

Please read post 4 from andy

[bassethound]

Frontpanel update
-Small improvement for standby modus
file: /avrmain-a.hex

[andyblac]

DO NOT UPDATE.

there is a bug in drivers, when you enter standby it will not then wake backup again.

a bug report has been sent to Clarke-Tech

[andyblac]

ok here is fix,

for remote control power button > you must updated the frontprocessor !

download (right click and link file as) avrmain-10.hex (http://www.et-view.com/download/avrmain-10.hex) and rename to avrmain.hex, and upload it to( /lib/firmware/ ) on your box.

then do the following

1) open telnet session
2) login to box
3) type the below code and press enter


/etc/init.d/fpupdatethats is power should now fix be working

here is what you should see:


root@et9000:~# /etc/init.d/fpupdate
Port OK
CheckBootMode = AVRMAIN
CheckMainMode = AVRMAIN
main mode
version : atmega = 0x7
version : hexversion = 0xa
version : hexversion = 0xa atmega = 0x7
update fp
CheckBootMode = AVRMAIN
CheckMainMode = AVRMAIN
go avrboot
wait CMD_MAIN_GO_BOOT 0
wait CMD_MAIN_GO_BOOT 1
CheckBootMode = AVRBOOT
CheckBootMode = AVRBOOT
now boot mode
download start
AVRBOOT
Reading HEX input file(/lib/firmware/avrmain.hex) for flash operations...
################################################## ################################################## ################################################## ################################################## #################
Erasing chip contents...
Programming Flash contents...
################################################## ####
Programming Flash contents End
Reading Flash contents...
################################################## ####
Comparing Flash data...
Equal!
==============================================
==================VFD UPDATE : Success
==============================================
CheckBootMode = AVRBOOT
go avrmain
new version 0xa

[oaogs1905]

hello,

i´ve done it like above but still no function with switch off because i get a message:

nothing found

why?

i would be very nice to get help.


greetings

[andyblac]

hello,

i´ve done it like above but still no function with switch off because i get a message:

nothing found

why?

i would be very nice to get help.


greetings


please post screens what what you get

[oaogs1905]

please post screens what what you get


hello,

thanks for your answer.
i get this message:

root@et9000:~# /etc/init.d/fpupdate
nothing found


greetings

[Alias1]

Hmm I thought the VIX image included the FPU

[andyblac]

it does, don't know why your getting that