jukkal2
20-12-20, 23:41
OpenVix sometimes seems to sometimes get stuck when I press the OK button repeatedly just after starting a playback.
On Sunday, I started a playback and pressed OK twice again to check the description text in the second info bar on the bottom of the screen. Well, I may have pressed it more than twice if it was slow to respond. When the info showed, it got into a loop between the two info bars at the bottom of the screen as if I would have been continuing to tap the OK key. I tried OK and exit a few times but it just didn't get out of the loop. Finally the stop key stopped the playback, but the box stayed in a state with the tv picture in the upper right corner and the rest of the screen black, without showing the recording list.
And it didn't seem to respond to any of the remote control keys any more.
I went to my computer and telnetted in to the receiver as root and gave the reboot command, and it responded with "The system is going down for reboot NOW!" as expected, but didn't start booting.
Nothing else seemed to help, so finally I used the rocker switch in the back of the receiver to turn power off and back on.
On Saturday, it had done almost the same thing. I had started a playback and hit OK twice just after that. Then it didn't go into a loop, but it refused to turn off the info bar no matter how many times I hit OK or exit. Hitting stop resulted in the tv picture in the corner and rest of the screen black, not responding to any remote control keys. And then I had also logged in via telnet and tried reboot with no success, and had to use the rocker switch.
There were also recordings going on in both cases, two movies on Saturday and a South Park episode on Sunday. Fortunately I can get the movies recorded on reruns and I have already seen the South Park episode anyway, just wanted to watch it again because I didn't remember what happened in it.
I can't send logs because there are none in the log directory.
On Sunday, I started a playback and pressed OK twice again to check the description text in the second info bar on the bottom of the screen. Well, I may have pressed it more than twice if it was slow to respond. When the info showed, it got into a loop between the two info bars at the bottom of the screen as if I would have been continuing to tap the OK key. I tried OK and exit a few times but it just didn't get out of the loop. Finally the stop key stopped the playback, but the box stayed in a state with the tv picture in the upper right corner and the rest of the screen black, without showing the recording list.
And it didn't seem to respond to any of the remote control keys any more.
I went to my computer and telnetted in to the receiver as root and gave the reboot command, and it responded with "The system is going down for reboot NOW!" as expected, but didn't start booting.
Nothing else seemed to help, so finally I used the rocker switch in the back of the receiver to turn power off and back on.
On Saturday, it had done almost the same thing. I had started a playback and hit OK twice just after that. Then it didn't go into a loop, but it refused to turn off the info bar no matter how many times I hit OK or exit. Hitting stop resulted in the tv picture in the corner and rest of the screen black, not responding to any remote control keys. And then I had also logged in via telnet and tried reboot with no success, and had to use the rocker switch.
There were also recordings going on in both cases, two movies on Saturday and a South Park episode on Sunday. Fortunately I can get the movies recorded on reruns and I have already seen the South Park episode anyway, just wanted to watch it again because I didn't remember what happened in it.
I can't send logs because there are none in the log directory.