View Full Version : [Zgemma H9S] New build box stuck at 49% boot
This is straight out of the box and sticking at 49%. I tried to reflash but only the recover file allows any kind of flash. If I dont use the recovery, the unit wont go into the flash startup. What is actually happening around 49% of boot. Could it be H/D issue?
Find the ipaddress (probably from your router information), then telnet into the box (login root)
Enter enigma2 and look for the issue (paste the information here)
However there is no recovery image for the H9 so not sure which image you are flashing
1554leslie
10-12-20, 23:30
Loads and loads of issues in the last few weeks with the h9s and twin tuner models
Loads and loads of issues in the last few weeks with the h9s and twin tuner models
Such as?
H9 Twin and H9 Combo both need re-flashing due to partion changes, H9S, H9.2S, H9T and H9.2H shouldn't have any major issues. Their latest drivers have also had diseqc motors fixed.
abu baniaz
11-12-20, 15:30
H9 Twin and H9 Combo both need re-flashing due to partion changes,
Does it matter whether they are flashed using Image Manager or USB?
Does it matter whether they are flashed using Image Manager or USB?
usb flash with recovery image to ensure all system settings are reset
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.