abedegno
01-11-20, 11:19
Hi,
I've just upgraded my LNB from a quad to a Gigblue Ultra SCR LNB (2 x legacy + 1 x SCR). All inputs appear to work fine, with 100% signal strength.
The receiver works fine when I only have tuner A configured, as soon as I try to configure the 7 other tuners as per the sticky thread here:
Unicable II, Inverto IDLU-32UL40-UNB00-0PP, FBC tuners (https://www.world-of-satellite.com/showthread.php?59959-Unicable-II-Inverto-IDLU-32UL40-UNB00-0PP-FBC-tuners)
And then force the tuner to test (Setup->Tuners & Scanning -> Misc -> Preferrer Tuner (B-H) I get a Tune failed error.
I have tried following the steps in this sticky thread:
Unicable devices and tune failed messages (https://www.world-of-satellite.com/showthread.php?58679-Unicable-devices-and-tune-failed-messages)
Which doesn't help either.
I was able to temporarily get all the tuners working by:
1) Configuring just one of the tuners (Setup -> Tuners and Scannning -> Tuner Setup)
2) Testing the tuner (Setup->Tuners & Scanning -> Misc -> Preferrer Tuner) - Although tuner indicator is blank for tuners (E-H) I assumed it switched (UI Bug?)
3) Repeat 1 and 2 in turn for each tuner
However this morning tuners B-H have stopped working and I get tune failed.
I'm running ViX 5.3.039 - perhaps I'm encountering some bugs and should upgrade to 5.4?
Thanks
Abe
I've just upgraded my LNB from a quad to a Gigblue Ultra SCR LNB (2 x legacy + 1 x SCR). All inputs appear to work fine, with 100% signal strength.
The receiver works fine when I only have tuner A configured, as soon as I try to configure the 7 other tuners as per the sticky thread here:
Unicable II, Inverto IDLU-32UL40-UNB00-0PP, FBC tuners (https://www.world-of-satellite.com/showthread.php?59959-Unicable-II-Inverto-IDLU-32UL40-UNB00-0PP-FBC-tuners)
And then force the tuner to test (Setup->Tuners & Scanning -> Misc -> Preferrer Tuner (B-H) I get a Tune failed error.
I have tried following the steps in this sticky thread:
Unicable devices and tune failed messages (https://www.world-of-satellite.com/showthread.php?58679-Unicable-devices-and-tune-failed-messages)
Which doesn't help either.
I was able to temporarily get all the tuners working by:
1) Configuring just one of the tuners (Setup -> Tuners and Scannning -> Tuner Setup)
2) Testing the tuner (Setup->Tuners & Scanning -> Misc -> Preferrer Tuner) - Although tuner indicator is blank for tuners (E-H) I assumed it switched (UI Bug?)
3) Repeat 1 and 2 in turn for each tuner
However this morning tuners B-H have stopped working and I get tune failed.
I'm running ViX 5.3.039 - perhaps I'm encountering some bugs and should upgrade to 5.4?
Thanks
Abe