ZGemma H9S OpenWebif remote button press do wrong functions

[xsony_ngux]

The zgemma remote via OpenWebif is not working correctly. When some buttons are pressed, it performs the wrong actions.

I am hoping this could use the correct zgemma remote (the one's that came with the H2S/H2H) and tested, as whenever I press a button it will do something else. I have the latest Wi-Fi model which now come with new remote.

60626

[adm]

I can confirm that the supplied remote for the ZGemma H9S is not the same as that shown in Webif, and that the button functions on the Webif remote representation do not match those on the real remote.

My remote for this box is identical to ......


https://www.ebay.co.uk/itm/original-remote-control-for-ZGEMMA-H9S-SINGLE-TUNER-4K-SATELLITE-RECEIVER-/254029831983

[xsony_ngux]

Anyone from ViX Team can update this please?

[abu baniaz]

The remote is taken from boxbranding and matches what is used during the build process. Sometimes boxes ship with different remotes in different countries. If you change it, people with opposite remote will complain. We will need to get agreement/confirmation.

The zgemma folder in following location has under-listed remotes


https://github.com/oe-alliance/branding-module/tree/master/BoxBranding/remotes





https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma1/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma2/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma3/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma4/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma5/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma6/rc.png
https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/remotes/zgemma7/rc.png


The correlation is done in RcModel.py. A bit weird some H9 boxes are using 6 and others 3


https://github.com/oe-alliance/branding-module/blob/master/BoxBranding/RcModel.py




"zgemmah10": "zgemma3",
"zgemmah102h": "zgemma7",
"zgemmah102s": "zgemma7",
"zgemmah10combo": "zgemma7",
"zgemmah2h": "zgemma3",
"zgemmah2s": "zgemma3",
"zgemmah2splus": "zgemma3",
"zgemmah32tc": "zgemma3",
"zgemmah3ac": "zgemma3",
"zgemmah4": "zgemma3",
"zgemmah5": "zgemma3",
"zgemmah52s": "zgemma3",
"zgemmah52splus": "zgemma3",
"zgemmah52tc": "zgemma3",
"zgemmah5ac": "zgemma3",
"zgemmah6": "zgemma3",
"zgemmah7": "zgemma3",
"zgemmah7c": "zgemma3",
"zgemmah7s": "zgemma3",
"zgemmah92h": "zgemma3",
"zgemmah92s": "zgemma3",
"zgemmah9combo": "zgemma3",
"zgemmah9s": "zgemma6",
"zgemmah9splus": "zgemma6",
"zgemmah9t": "zgemma6",
"zgemmah9twin": "zgemma3",
"zgemmahs": "zgemma3",
"zgemmahzeros": "zgemma3",
"zgemmai55": "zgemma5",
"zgemmai55plus": "zgemma3",
"zgemmas2s": "zgemma1",
"zgemmash1": "zgemma1",
"zgemmash2": "zgemma2",
"zgemmaslc": "zgemma2",
"zgemmass": "zgemma2"


I have asked if we can change it to the one in the zgemma3 folder.

[xsony_ngux]

I think this remote issue is to do with the WiFi and Non-WiFi Model of the box.

Because the Non-WiFi model did come with the remote I attached earlier.
The WiFi model on the other hand came with the remote that came with boxes like ZGemma H2H and H2S.

As already pointed out earlier, the key functions on OpenWebIf are all mixed up so for e.g. the number '1' button is showing at the top of remote and where the '1' icon is on the remote it is showing as record. So quite confusing since the wrong remote is there.

Hopefully this is fixed ASAP.

[abu baniaz]

I received information that the original receivers were shipped with the pictured remote. My Duo 4K has a different remote in OWIF and wizard/help screens because box has two remotes. If we change it, it will be "wrong remote" for other people.

The OWIF remote buttons should match the pictured remote in OWIF, not necessarily the one in your hand. Is this not the case?

[abu baniaz]

Here is someone selling a H9 shipped with the other type of remote.


https://www.ebay.co.uk/itm/Zgemma-H9S-2K-UHD-Satellite-Box/284025932207


It has a button with "Mouse" text.

Anyway, I have committed some changes for now and will be in the next update/image. I don't have the box, so can't test.


https://github.com/oe-alliance/branding-module/commits/master

[adm]

Here is someone selling a H9 shipped with the other type of remote.

It's a completely different box and it's not the H9S box that I purchased from WOS in the past few months. The Ebay back panel picture does not show any connections for the 2 Wi-fi antennas that the H9S comes with.

Openvix reports my box as a H9S and the front panel says H9S.

60664

[abu baniaz]

It's a completely different box and it's not the H9S box that I purchased from WOS in the past few months. The Ebay back panel picture does not show any connections for the 2 Wi-fi antennas that the H9S comes with.

Openvix reports my box as a H9S and the front panel says H9S.


Not that it matters to what we can do, what does the front of the box on that picture on Ebay say?

[abu baniaz]

The files on receiver are located in /usr/share/enigma2/rc_models

Those who are bothered by the mismatch in remotes, should move files between the zgemma3/ zgemma6 folders. Make a backup before you tinker! Remote png path file will need slight edit.

[xsony_ngux]

I received information that the original receivers were shipped with the pictured remote. My Duo 4K has a different remote in OWIF and wizard/help screens because box has two remotes. If we change it, it will be "wrong remote" for other people.

The OWIF remote buttons should match the pictured remote in OWIF, not necessarily the one in your hand. Is this not the case?
Eventhough I have a different remote, the OWIF remote has the button keys in different places as said earlier.

[xsony_ngux]

Here is someone selling a H9 shipped with the other type of remote.


https://www.ebay.co.uk/itm/Zgemma-H9S-2K-UHD-Satellite-Box/284025932207


It has a button with "Mouse" text.

Anyway, I have committed some changes for now and will be in the next update/image. I don't have the box, so can't test.


https://github.com/oe-alliance/branding-module/commits/master


I have this one you can see remote in picture, it allows Wi-Fi and has antenna's included:


https://www.ebay.co.uk/itm/New-Zgemma-Star-H9S-Wifi-4K-IPTV-UHD-Single-Sat-Receiver-DVB-S2X-Stalker/324135686690?_trkparms=ispr%3D1&hash=item4b77fe1222:g:EHIAAOSwIXldgkQB&amdata=enc%3AAQAFAAACYBaobrjLl8XobRIiIML1V4Imu%252 Fn%252BzU5L90Z278x5ickk5v8gVt3hEWLVg%252F253w6XCWP m4xLBSg5UPsgbnMaGFpzcn9pyOE78QqB8L8EA4nVilpT2oroOu KQaMyk88tebeQdjIp52gDnK1ElbzGgarsUVL%252BcBrerey1h W7Wy1TGxbu2vNpvvUvpI0LJTHIr0YDZZc6NLMH6ehupVBfQKrT ldI6zkIiOOxCsC4FiccX7f2I3CLUMVOu9s%252F0TO89bGPOSk 0FheOtZiK4QnJYGbxQ4zXUtn7X%252Bk%252BiMKK8CL7In8KF 01UFcfOFFjDdkLXLTzz7GgzFr1uSXp9ZW8TesXfiW6I4NWdzqm 3M9VRzqL0iQwv9hwoFaLz322%252FZWA%252Byohzw4ppmo1n3 h1ZQCus78XOkcGR%252FqvOQUZ8mc5lvmaIaHXWLJZH%252FGK cuSPlVtaFXRzR7a6Cm2A%252FHjEUZ3R6%252FlJDxAgxkldha roNNwo7BSZu7YCDh42EBjB93ex2TI%252FQY0EPRE9jBps1qfz ot%252FTukl56x2SOx%252FwmbqiwYZ2Yyryh5kc8J8TUzom3v G%252FWIoM%252BhYjNxtM41GQKXa%252BVjmLXXtnt51FkZpr l3trMSIfd3KHw3YGxtv%252Fowt4OWk1viFk2GH%252FvMYKUs hAP5MtV83XVG%252F0nMBx5F%252FzVvPiuEVtl462%252BJi6 okyLWEkZRHIsInTH7nNTv3zngaYWd1AGYxTJkodhfVqnrBbWA4 NgDaDlPvb6Q%252BvrWPtdAmFQcxmH2ry2ipv1uAlffig%252F NJNw5yIHg45C063zwSm2wzE5I%252Bg4lpNjCf%252FLd%7Cck sum%3A324135686690caf0a0438d464ecc8d17a0db9f776954 %7Campid%3APL_CLK%7Cclp%3A2334524

[xsony_ngux]

The files on receiver are located in /usr/share/enigma2/rc_models

Those who are bothered by the mismatch in remotes, should move files between the zgemma3/ zgemma6 folders. Make a backup before you tinker! Remote png path file will need slight edit.

I'll try this out, thanks

This seemed to have fixed it, thank you.

[abu baniaz]

The Zgemma H9 comes with different remotes. Granted, the newer ones have the zgemma 3 remote and not zgemma 6. We cannot change it because it will always be wrong for someone. Post as many links as you want, it won't make a difference to the situation. The case is exactly the same for the Vu Duo 4K and some of the Technomates.

The OWIF remote should function as pictured on OWIF from next image. If you want to test it now, unzip the attachment and send to /usr/share/enigma2/rc_models/zgemma6 Reboot box and make sure you reload web browser on PC.