Tuner B no signal

[khan888]

Hi

I've moved my satellite tuner from slot 2 to 1 which then makes it a twin tuner. However tuner a I'm getting a signal but tuner b drops to 0%

604606046160462


Cheers

[abu baniaz]

How does moving a tuner card/module from one slot to another slot double the number of tuners? You have the same number of cards/modules as before!

Post a screenshot of Menu, Information, devices. Also post a picture showing the back of your box where the tuner cards/modules are and to which connections the signal wires are hooked up to.

[khan888]

How does moving a tuner card/module from one slot to another slot double the number of tuners? You have the same number of cards/modules as before!

Post a screenshot of Menu, Information, devices. Also post a picture showing the back of your box where the tuner cards/modules are and to which connections the signal wires are hooked up to.On the octagon 4008 I thought whatever tuner is in slot 1 makes the tuner into twin? The dvb-c tuner was twin in slot one but that's now in slot 2


https://uploads.tapatalk-cdn.com/20200727/2f69d4d7942c7759c71dff873f2b2625.jpghttps://uploads.tapatalk-cdn.com/20200727/ef02f44bbdcba118608522389e1ddbf8.jpg

[ccs]

deleted, confused!

[abu baniaz]

You don't have a signal wire hooked up to Tuner B. How will you receive signal?

[abu baniaz]

The golden rule of tuner configuration is that it must match what is hooked up to it. You do not have a signal wire to tuner B, but you have told the receiver there is one. This is why you are getting the issue.

Your solution is to hook up a signal wire to tuner B. If that is not possible, use internal loopthrough.
Please note:
Some receivers require signal wire to be hooked up to A and internal loop to B.
Some receivers require signal wire to be hooked up to B and internal loop to A.

Or get a Unicable LNB and use a splitter to supply both tuners with signal.

[BrianTheTechieSnail]

++++++ Deleted ++++++