Configure FBC tuners using universal LNB

[Valiant]

I have just installed a VU+ Uno 4k SE and I would like someone to confirm that I have set up the tuners appropriately.

I still have the timer clashes that I had on the old Miraclebox which is now going to another room as a client box probably.

When I install a Unicable II LNB, I expect that the few timer clashes that I have will be eliminated.

Presently, I have a universal LNB so for now I have the tuners set as follows :-

Tuner A Advanced 28.2E Astra
Tuner B Equal to Tuner A
Tuners C to H FBC Automatic

Is this OK?

Thanks

[abu baniaz]

I have moved your post to it's own thread and given it a title that reflects your question.

You have not said how many signal wires are hooked up to your tuners. If you have only one wire, then the tuner configuration is wrong.
If you have two, then that will work.

I would have set following if you have two signal wires hooked up to your receiver:
A: simple, single, 28.2
B: simple, single, 28.2

[Valiant]

Sorry Abu, I should have said I had two signal wires. I will set Tuners A and B as you advise. Thankyou.