PDA

View Full Version : Zgemma H7S front panel


BrianTheTechieSnail
24-04-20, 16:33
My Zgemma H7S is running OpenVIX 5.3.026 (Release).

The front panel keeps getting in a weird state where when I bring the unit out of "standby" with the red button on the remote:
a) The clock display is frozen (colon not flashing, time not updating)
b) If I use the remote to enter a channel number eg. 2015 then the display is left showing " 201", that is just the first 3 digits of the number.
c) If I use the red button on the remote to go back to "standby" mode the dimmed clock display works fine!

I don't really have any idea what makes it go in and out of this broken mode, I can find no pattern at all, but I think leaving the box alone for an hour or two seems to fix it sometimes.

Anyone got any ideas what could be wrong?
Willo3092
24-04-20, 16:37
Have you got the vfdcontrol plugin installed? It's a system plugin.
I can't remember whether it's needed or not but if it's installed, try removing it and reboot.
BrianTheTechieSnail
24-04-20, 16:54
I haven't added anything extra except some skins (I am using Magic-FHD skin), SAMBA and miniDLNA.
urie
24-04-20, 17:01
THe plugin is called Permanent VDF Clock.
Willo3092
24-04-20, 17:33
Permanent clock puts a clock on the TV screen.
vfdcontrol gives extra options on the front panel clock. If it's installed, remove it. If it isn't, try it.
urie
24-04-20, 17:58
Permanent clock puts a clock on the TV screen.
vfdcontrol gives extra options on the front panel clock. If it's installed, remove it. If it isn't, try it.

I did not mention Permanent clock that is different plugin , I said Permanent VDF Clock. :)
Willo3092
24-04-20, 18:23
THe plugin is called Permanent VDF Clock.

You were the one who brought up Permanent VDF Clock? (which I'm sure is VFD for vacuum filled display).
I only offered a suggestion that adding or removing vfdcontrol might help. You haven't said if you've tried my suggestion.
BrianTheTechieSnail
24-04-20, 19:03
THe plugin is called Permanent VDF Clock.

Seems to only do exactly what it's called, and without any flashing colon.

Parts of the channel number still show until this plugin overwrites them after an effectively random time.

I want it working nicely, the way it sometimes does, but all the time.

I want the clock, with a flashing colon except when keying in a channel number I want to see the digits and after changing channel I want to see the channel number for a few seconds before it flips back to the clock.
BrianTheTechieSnail
24-04-20, 19:05
vfdcontrol gives extra options on the front panel clock. If it's installed, remove it. If it isn't, try it.

Doesn't seem to be completely compatible, or to offer many options.
I uninstalled it again.
urie
24-04-20, 19:42
Correct my mistake :eek: should have said Permanent VFD Clock.
BrianTheTechieSnail
25-04-20, 21:26
Weird.
So far today it's working fine all the time!
(with none of the plug-ins mentioned above installed)
BrianTheTechieSnail
27-04-20, 03:24
I think it's when a recording is in progress the front panel is messed up.
Where do I report this bug?
urie
27-04-20, 11:55
Have you been in to check the settings for panel on openatv you go to menu \ setup \Usage & GUI \STB Display \Display settings
for Record Symbol in use settings you have choices of:
REC, Blinking REC, or Time

You also have same choices for Record Symbol in Standby settings.
BrianTheTechieSnail
27-04-20, 14:10
Have you been in to check the settings for panel on openatv you go to menu \ setup \Usage & GUI \STB Display \Display settings
for Record Symbol in use settings you have choices of:
REC, Blinking REC, or Time

You also have same choices for Record Symbol in Standby settings.

Bingo!

The H7's display can't show those symbols because it is just four 7 segment LEDs.
However the settings aren't ignored as I assumed, instead you need to set things up so that the display is never asked to show anything except numbers, otherwise the display stops updating until later on it again receives 4 numeric digits.
Sicilian
28-04-20, 07:26
Theres a bug in openvix and the display for the H7. When recording the start time freezes on screen, after recording goes back to normal. It should show REC. It's been noted to look further into.
BrianTheTechieSnail
28-04-20, 10:19
Theres a bug in openvix and the display for the H7. When recording the start time freezes on screen, after recording goes back to normal. It should show REC. It's been noted to look further into.

I think it behaves as if the hardware isn't capable of showing "REC".
I've never seen anything except numbers on the display.

I now have the settings set so that nothing except numbers will be shown and the display doesn't freeze.
60093
BrianTheTechieSnail
02-05-20, 20:38
Hmmm, though of course I have seen "boot" on the display.
And now after reflashing from USB I have seen "FLSH".
Weird that "REC" won't show.
If it could manage to show REC and the time alternating that would be super, plus still show channel numbers as you type them on the remote.
But I'm happy enough with the settings I showed and "REC" never showing.
BrianTheTechieSnail
06-07-20, 23:23
There still, in addition to what I worked around above, a problem with the front panel display on the Zgemma H7 freezing when I open certain menus in OpenVIX.
For instance if I press File-List on the remote to choose a movie to play it freezes the front panel display.
(The time doesn't update and the colon stops flashing)