bobonthejob
21-05-10, 10:47
Below is a quick low down on 'How to send/save Enigma settings to your VUDuo'
First off all you will need to have downloaded a version of dreamboxedit. Link is below...
http://www.world-of-satellite.com/forumdisplay.php?23-Settings-Editors
Next you will need to download some Enigma2 settings. See link below.
http://www.world-of-satellite.com/forumdisplay.php?21-Enigma-2-Settings
Sending / Uploading
Launch the application once it has been setup and installed.
You should have something similar to the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=383&stc=1&d=1274431186
Next you need to open up the settings, this is done by clicking 'File', 'Open' and then browsing to the locations where the settings are. Once you are in the folder where the settings are click 'OK'. You should see something similar to the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=384&stc=1&d=1274432688
Now that the settings are loaded in DreamBoxEdit, you are ready to send over the settings to the reciever. However before doing this we will take a quick look at the options. Click on the 'Otions' button at the top and you should see something very similar to the below. Please note that the VuDuo uses the 'New Enigma2 settings' from the options panel. Below is an example of the settings panel.
17605
Once confirmed come out and you are ready to upload the settings...
Click on 'FTP' and you get the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=387&stc=1&d=1274434414
Now click on 'Send File to Dreambox' - you will be informed once the upload has been done.
Saving
To save a copy of your settings from your reciever. You need to Launch DreamBoxEdit and click on the 'FTP' button.
http://www.world-of-satellite.com/attachment.php?attachmentid=387&stc=1&d=1274434414
In the above you can see that you can select a folder location to save your settings too. Click 'Browse' and select the location you would like to backup your settings too. Once selected click on 'Recieve Files from Dreambox'
Done!!!!!!! :D
First off all you will need to have downloaded a version of dreamboxedit. Link is below...
http://www.world-of-satellite.com/forumdisplay.php?23-Settings-Editors
Next you will need to download some Enigma2 settings. See link below.
http://www.world-of-satellite.com/forumdisplay.php?21-Enigma-2-Settings
Sending / Uploading
Launch the application once it has been setup and installed.
You should have something similar to the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=383&stc=1&d=1274431186
Next you need to open up the settings, this is done by clicking 'File', 'Open' and then browsing to the locations where the settings are. Once you are in the folder where the settings are click 'OK'. You should see something similar to the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=384&stc=1&d=1274432688
Now that the settings are loaded in DreamBoxEdit, you are ready to send over the settings to the reciever. However before doing this we will take a quick look at the options. Click on the 'Otions' button at the top and you should see something very similar to the below. Please note that the VuDuo uses the 'New Enigma2 settings' from the options panel. Below is an example of the settings panel.
17605
Once confirmed come out and you are ready to upload the settings...
Click on 'FTP' and you get the below.
http://www.world-of-satellite.com/attachment.php?attachmentid=387&stc=1&d=1274434414
Now click on 'Send File to Dreambox' - you will be informed once the upload has been done.
Saving
To save a copy of your settings from your reciever. You need to Launch DreamBoxEdit and click on the 'FTP' button.
http://www.world-of-satellite.com/attachment.php?attachmentid=387&stc=1&d=1274434414
In the above you can see that you can select a folder location to save your settings too. Click 'Browse' and select the location you would like to backup your settings too. Once selected click on 'Recieve Files from Dreambox'
Done!!!!!!! :D