AutoBouquetsMake 3.1 Cannot Read Data

[kiltoom]

Hi

Similar issue on Zgemma H7S with AutoBouquetsMaker when I start scan, after a minute or so "Cannot Read Data" error.

All channels are there with a manual scan, and works with AutoBouquets E2 plugin, just not with AutoBouquetsMaker 3.1

Have reflashed using592615.3.002

Provider SkyUK

Tuner A Si2169D (DVB-S2X)
28.2° E / QUEST
Tuner B Si2169D (DVB-S2X)
Tuner C Si2168 (Combined DVB-C/T2)

[abu baniaz]

you are better off starting your own thread and most importantly, debug log

[kiltoom]

Hi

Issue with Zgemma H7S with AutoBouquetsMaker when I start scan, after a minute or so "Cannot Read Data" error.

All channels are there with a manual scan, and works with AutoBouquets E2 plugin, just not with AutoBouquetsMaker 3.1

Have reflashed using 5.3.002
59263

Provider SkyUK

Tuner A Si2169D (DVB-S2X)
28.2° E / QUEST
Tuner B Si2169D (DVB-S2X)
Tuner C Si2168 (Combined DVB-C/T2)

[abu baniaz]

Please upload your debug log. Saves wasting your time.

See post 1/2 on this thread
https://www.world-of-satellite.com/showthread.php?44783-Please-read-before-raising-ABM-support-questions


For ABM to work for Sky UK, you must be able to reliably receiver 11778 Vertical, 27500 on all tuners that have access to it. ABM uses the last free tuner.

[kiltoom]

ABM Log below

Dont think its an issue re reciever as getting same error dish where its working with Zgemma H2 & Vu+Duo2



[ABM-Scheduler][Scheduleautostart] reason(0), session None
[ABM-Scheduler][Scheduleautostart] reason(0), session <__main__.Session instance at 0xb20c9b48>
[ABM-Scheduler][Scheduleautostart] AutoStart Enabled
[ABM-Scheduler][AutoScheduleTimer] Schedule Disabled at Sat 21 Sep 2019 13:43:22 BST
[ABM-config] level: expert
[ABM-config] providers: sat_282_sky_uk:hd_london_thames_valley:41:
[ABM-config] keepbouquets: All
[ABM-config] hidesections: sat_282_sky_uk:201|sat_282_sky_uk:490|sat_282_sky_ uk:560|sat_282_sky_uk:580|sat_282_sky_uk:801|sat_2 82_sky_uk:950|sat_282_sky_uk:993|sat_282_sky_uk:10 00|sat_282_sky_uk:1020|sat_282_sky_uk:1030|sat_282 _sky_uk:1050
[ABM-config] add provider prefix: False
[ABM-config] show in extensions menu: True
[ABM-config] placement: top
[ABM-config] skip services on non-configured satellites: True
[ABM-config] show non-indexed: False
[ABM-config] FTA_only: sat_282_sky_uk
[ABM-config] schedule: False
[ABM-Manager][load] Loading settings...
[ABM-BouquetsReader] Reading lamedb...
[ABM-BouquetsReader] lamedb ver 4
[ABM-BouquetsReader] Read 74 transponders and 627 services
[ABM-Manager][load] Settings loaded
[ABM-main][doTune] searching for tuner for Sky UK
[ABM-main][doTune] Search NIM for orbital position 282
[ABM-main][doTune] Nim found on slot id 1 with sat 28.2E Astra 2E/2F/2G
[ABM-main][doTune] Fixed dish. Will wait up to 10 seconds for tuner lock.
[ABM-main][checkTunerLock] TUNING
[ABM-main][checkTunerLock] ACQUIRING TSID/ONID
[ABM-Manager][read] Reading sat_282_sky_uk (hd_london_thames_valley)...
[ABM-DvbScanner] Adapter 0
[ABM-DvbScanner] Demuxer 1
[ABM-DvbScanner] Frontend 1
[ABM-DvbScanner] DVBType dvbs
[ABM-DvbScanner] NIT pid: 0x10
[ABM-DvbScanner] NIT current table id: 0x40
[ABM-DvbScanner] NIT other table id: 0x41
[ABM-DvbScanner] Ignore visible service flag: 0
[ABM-DvbScanner] SDT pid: 0x11
[ABM-DvbScanner] SDT current table id: 0x42
[ABM-DvbScanner] SDT other table id: 0x46
[ABM-DvbScanner] BAT pid: 0x11
[ABM-DvbScanner] BAT table id: 0x4a
[ABM-DvbScanner] Reading transponders...
[ABM-DvbScanner] Timed out reading NIT
[ABM-DvbScanner] No nit_other found - set nit_other_table_id="0x00" for faster scanning?
[ABM-DvbScanner] Added/Updated 0 transponders with network_id = 0x-1
[ABM-DvbScanner] Reading services (SKY)...
[ABM-DvbScanner] Timed out reading BAT
[ABM-DvbScanner] Read 0 services with bouquet_id = 0x1007
[ABM-DvbScanner] Reading services extra info...
[ABM-DvbScanner] Timed out reading SDT
[ABM-DvbScanner] Read extra info for 0 services
[ABM-Manager][read] sat_282_sky_uk, Done
[ABM-main][doScan] Cannot read data

[abu baniaz]

Attach does not mean post an excerpt

[abu baniaz]

please post screenshots of all your 28.2 tuners receiving 11778, vertical, 27500.

there is a guide to taking screenshots in my signature.

[kiltoom]

This ?

59265

59266

[abu baniaz]

Sort of OK. Please try this now
Menu > Setup > Tuners & Scanning > Signal Finder

Change to Tuner B, set to predefined transponder and select the same TP as above.

After about 20 seconds, press the Yellow button.

Don't use a phone to take a picture. Take a screenshot using this method
https://www.world-of-satellite.com/showthread.php?44054-How-to-take-screen-shots-How-to-attach-files

[kiltoom]

Tuner B (Yellow Button nothing happens)

59271

Tuner A (Yellow Button pressed after 20s)

59272

[abu baniaz]

Thanks. Can you swap the cables around and try again please?

[kiltoom]

cables swapped

Tuner B (Yellow Button nothing happens)

59275

Tuner A (Yellow Button pressed after 20s)

59276

[abu baniaz]

The temporary solution is to disable Tuner B while using ABM.

One other question, if you perform an enigma2 scan using Tuner B, how many services do you find?

Menu > Setup> Tuners & Scanning > Manual Scan
Tuner: B
Type of scan: Single satellite
Network scan: No

Last question: Do you lose signal when it rains?

[kiltoom]

Can confirm ABM is now working with Tuner B disabled

No services detected on manual scan of tuner b (See below)

59277

Can confirm I do not loose signal when it rains

Many Thanks for the trouble shooting....

[abu baniaz]

Do you have signal wires to both tuners direct from LNB without any splitters in between receiver and LNB?

How many services do you get with a scan using tuner A?

[kiltoom]

No Splitters, 20mt run of original Sky twin shot cable

Tuner A Scan results below

59278

[abu baniaz]

That's the right number of services to find, so your dish alignment is fine although LNB ports are independent. However, you have swapped cables round so that rules out the LNB being faulty. lathough you do get odd weird switching faults. You could try at a friends house if you want to rule this out too. Make sure they don't have a Sky Q LNB.

Sorry to ask, but did you try the scan of tuner B with it disabled or enabled? And what have you configured it as? If tuner B is not finding services when enabled and correctly configured, best to speak to your seller.

[kiltoom]

Have 2 dishs running and getting same on both. Tested with a VU+Duo & zgemma H2 and working fine on both dishs.

Tuner B was enabled (Set to = Tuner A)

Looking like faulty B Tuner ?

[abu baniaz]

Looks like issue with tuner B. I prefer to manually set tuner instead of equal to.

[kiltoom]

Has tried both ways, Thanks for help