Mounting Two STB's on same LAN

[Hebridean]

I have a Vu+ and a Tiviar Alpha on the same LAN and can transfer recordings from the Vu+ box to the Tiviar.

I also want to do the reverse, i.e. transfer files from the Tiviar to the Vu+ box however, when I go to the Tiviar box and browse the network mounts, the Tiviar will only see the NAS drive that I have and not the Vu+ box.

Do I have to remove the Tiviar mount from the Vu+ box before I can mount the Vu+ box on the Vitiar? :confused:

[cactikid]

Any enigma2 box on a network should have its own ip address and have samba enabled to allow a network browser to find your model,click on item and mount your hdd and save as that should work.

[Hebridean]

Any enigma2 box on a network should have its own ip address and have samba enabled to allow a network browser to find your model,click on item and mount your hdd and save as that should work.

I checked both boxes and for some reason samba had become uninstalled on the Vu+ box. Installed it again and everything is fine now.