ABM cannot read data

[lnoton]

Hi all,

Context...

I'm on openvix (updated to latest).

I've not used my freeview tuners and relied on freesat, as my booster was knackered on the ariel.

Fixed that and when I scan I now get all tv channels, with great quality and strength. Last scanned is fully populated.

Problem...


I wanted to use ABM to create nice bouquets but it's giving me "cannot read data".

I'm based in Cheshire, North West England so is there something I need to hack to get this to run?

ABM still seems to work for free sat, but not freeview.

What Ive done....


I've uninstalled ABM and reinstalled. It's on 3.1

Ive deleted bouquets, disable tuners and reenabled them. Rebooted etc.

The only thing I've not done is reflash.

I saw this link


And it looks similar except its for cable not free view..


Is there something I can do?

[twol]

What receiver are you using and configuration?

[lnoton]

What receiver are you using and configuration?


Gigablue ue 4k. Not sure what you mean by configuration, but it's openvix 5.2




Box
Brand & Model: GigaBlue UHD UE 4K
Chipset: Broadcom 7252s
Main Memory: 713232 kB free / 2066588 kB total
Box Uptime: 1:08
Software
System OE: OE-Alliance 4.2
Firmware version: OpenViX 5.2.045 (2019-07-17)
Kernel / Drivers: 4.1.20 / 20190502
Tuners
Tuner A DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner B DVB-S2 NIM(45308 FBC) (DVB-S2)
28.2° E / BBC One HD
Tuner C DVB-S2 NIM(45308 FBC) (DVB-S2)
28.2° E / Channel 5 HD
Tuner D DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner E DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner F DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner G DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner H DVB-S2 NIM(45308 FBC) (DVB-S2)
Tuner I GIGA DVB-T2/C NIM (TT3L10) (Combined DVB-C/T2)
Tuner J GIGA DVB-T2/C NIM (TT3L10) (Combined DVB-C/T2)
Hard disk model: ATA(WDC WD10SPZX-00Z)
Capacity: 888.0 GB free / 931.5 GB ("1 TB") total (/media/hdd)
Network Interface: eth0 (Broadcom Gigabit Ethernet)
Link Speed: 1 GBit/s

[twol]

Configuration:-
Whats connected to tuner A and tuner B ports on the back of the box?
Whats connected to the Tuner I/J ports on the back of teh box??
What do you mean by BBC1 and Ch5 on tuners B & C??

[lnoton]

Configuration:-
Whats connected to tuner A and tuner B ports on the back of the box?
Whats connected to the Tuner I/J ports on the back of teh box??
What do you mean by BBC1 and Ch5 on tuners B & C??


Ahh right. Freesat cables connected to sat tuners x2. Aerial connected to add on board i added to the internal board.

That block of text is from webif. Likely the current channels tuned to each tuner at the time I took a copy of the text.

[lnoton]

https://www.world-of-satellite.com/showthread.php?59815-ABM-(Terrestrail-)-Add-HD-channels-regions

Following this guide....

[lnoton]

That didn't work failed to find enough transponders... Wierd as all the freeview channels are there in last scanned..

Only dvb-t2 multiplexes found. Insufficient data to create a provider file.

[abu baniaz]

@Inoton, please follow this thread and upload the files it creates
https://www.world-of-satellite.com/showthread.php?42301-ABM-(UK-Terrestrail-)-Add-HD-channels-regions

[Sicilian]

If the issue is ABM scanning with the Twin Hybrid tuner, disable Tuner J for now. It's a driver issue. It's been reported to them and they're being hounded by myself to fix the issue.

[Huevos]

If the issue is ABM scanning with the Twin Hybrid tuner, disable Tuner J for now. It's a driver issue. It's been reported to them and they're being hounded by myself to fix the issue.What box is that?

[Sicilian]

What box is that?

Post 3, Gigablue UHD UE 4K and Quad 4K, issue with the twin C/T2 tuner module drivers.

[abu baniaz]

Post 3, Gigablue UHD UE 4K and Quad 4K, issue with the twin C/T2 tuner module drivers.
I am not getting this issue with a GB UE 4K and a PnP tuner card using Freeview Crystal Palace

[Sicilian]

I am not getting this issue with a GB UE 4K and a PnP tuner card using Freeview Crystal Palace

I'll re-test it next week.

Try doing a complete manual scan on each I & J tuners with them both enabled.

[Sicilian]

I am not getting this issue with a GB UE 4K and a PnP tuner card using Freeview Crystal Palace

Yes all working fine on OpenViX 5.3 builds, there was an issue in old 5.2 builds.

[lnoton]

hi all. thanks for the suggestions.

I've only just seen these, as was back on the forum to report a different bug/feature.

I'm home alone for the next two nights so will give this a go.

However, I'm now on 5.3.x so I'll run the process as is if its working in the latest version.

[lnoton]

Bingo! Disabling tuner J worked. I'm on 5.3.

Guess I just re-enable it now right?

[abu baniaz]

Yes. You can enable it.