Deep standby causing iptv to fail

[Markle]

Hi, got a strange problem when the box awakes from deep standby, basically all Iptv channels are black screen with message no data on the transponder.
If I flick the power switch off on everything works as expected.
Any ideas or thoughts would be welcome.
Thanks

[Andy_Hazza]

Flicking the power switch on/off is just asking for trouble. Personally just put into standby mode, as IPTV relies heavily on your internet/network and I’m guessing going into deep standby affects the network thus why you are getting blankety blanks when coming out of deep standby.
I maybe wrong though, but thats my theory on it.


Sent from my iPhone using Tapatalk

[Markle]

Hey, thanks for reply.
It’s possible I guess but the network test comes up green plus I’m sure I’ve had this working in the past.
I don’t actually use the box very often so deep standby was my preferred option.
Perhaps I’ll try the WiFi connection instead and see if same happens.

[cactikid]

I would imagine cable is always better than wifi,have you tried restart Gui or reboot?

[Markle]

Yeah, WiFi same as wired. Reboot still doesn’t work. It needs a power cycle to start working again.
If I upload the bouquets again it works without the need for the on/off.
Weird.

[Andy_Hazza]

I think personally you will need to set a timer to bring your receiver out of deep standby, then see if you can then run an IPTV Bouquet scan then put your receiver into standby mode and see if that works.


Sent from my iPhone using Tapatalk

[Markle]

Hi, appreciate the support on this one. It’s doing my head in.
Not sure how bringing the box out of deep standby with a timer would make any difference but I’ll give it a go.
The bouquets were uploaded using echannelizer via an iptv provider. All the existing ones work fine.
Definitely not a network issue because as I’ve said if I re upload the bouquet it works without the need for a power cycle,
Thanks again anyway.