Resin
15-02-19, 19:13
I received a new HD51 from World of Satellite today (2x DVB-S/S2/S2X tuners).
Set it up and the Wizard started.
When it got to the Satellite search, no satellites were found. I then realized that the satellite cable wasn't plugged in I switched the box off and removed the PSU cable, connected the satellite plug and restarted the box.
The wizard started again and again found no satellites. I shut down and disconnected the box as before and checked the satellite plug (cable was loose and I repaired it). I then restarted the box.
This time, the wizard didn't appear and I ended up with the OpenViX Please Wait screen with the box displaying 2 rows of bars for the length of the display, plus an HD and what appears to be a TV symbol. After the screen had been stuck on Please Wait for 5 mins, I turned off the box. (the standby button did nothing unless I held it in
I watched the screen at reboot and after the Please Wait appeared, a rectangular box briefly appeared at the bottom of the screen showing four coloured buttons with Single EPG, Timer, Search and something else. This then disappeared, leaving the Please Wait screen permanently displayed.
The remote control didn’t do much. One thing that did initially work after the Please Wait was pressing the yellow button brought up an empty EPG search screen with the Please Wait screen showing in a reduced window.
Pressing yellow twice, brought up the “Available locales” list. Occasionally I could scroll up or down the list, but that was it – nothing else worked, including Exit and Menu.
I have done nothing to the box (no flashing or anything), other than adding a hard drive. All the above happened when I went to set the box up before adding the hard drive. Adding the drive made no difference. One thing I did notice was that the HD icon was shown on the box display, even though no drive was present.
I assume the box needs a factory reset, but as I can't get into the Menu to do it and there doesn't seem to be a reset button anywhere, I'm a bit lost as to what to do next.
Sorry for the long post, but I've tried to give as much detail as possible as I'm unable to access a log or anything.
Set it up and the Wizard started.
When it got to the Satellite search, no satellites were found. I then realized that the satellite cable wasn't plugged in I switched the box off and removed the PSU cable, connected the satellite plug and restarted the box.
The wizard started again and again found no satellites. I shut down and disconnected the box as before and checked the satellite plug (cable was loose and I repaired it). I then restarted the box.
This time, the wizard didn't appear and I ended up with the OpenViX Please Wait screen with the box displaying 2 rows of bars for the length of the display, plus an HD and what appears to be a TV symbol. After the screen had been stuck on Please Wait for 5 mins, I turned off the box. (the standby button did nothing unless I held it in
I watched the screen at reboot and after the Please Wait appeared, a rectangular box briefly appeared at the bottom of the screen showing four coloured buttons with Single EPG, Timer, Search and something else. This then disappeared, leaving the Please Wait screen permanently displayed.
The remote control didn’t do much. One thing that did initially work after the Please Wait was pressing the yellow button brought up an empty EPG search screen with the Please Wait screen showing in a reduced window.
Pressing yellow twice, brought up the “Available locales” list. Occasionally I could scroll up or down the list, but that was it – nothing else worked, including Exit and Menu.
I have done nothing to the box (no flashing or anything), other than adding a hard drive. All the above happened when I went to set the box up before adding the hard drive. Adding the drive made no difference. One thing I did notice was that the HD icon was shown on the box display, even though no drive was present.
I assume the box needs a factory reset, but as I can't get into the Menu to do it and there doesn't seem to be a reset button anywhere, I'm a bit lost as to what to do next.
Sorry for the long post, but I've tried to give as much detail as possible as I'm unable to access a log or anything.