Unicable2 FBC Tuner 2 physical wires - help!

[leinsterlegend]

Hi All
I just bought the Vu+ Ultimo 4k (from the sponsor). It has 1 dual FBC tuner and a dvb t2 tuner.
I have a unicable2 lnb (also from sponsor)
The cable is split with power pass splitter.

As I have 2 cables from the lnb I understand I should attach them both to the physical connections.
What is confusing me is that on the STB it says "Tuner A (FBC)" and it has 2 physical connections. The slot which says "Tuner B (FBC)" is empty.

Are the 2 physical connections on "Tuner A (FBC) " actually Tuner A and B in the guides?
What is the best way to configure the Tuners to maximise ability to record as many channels as possible? Thanks

[abu baniaz]

Your tuners A-H are using the tuner card in tuner slot A



Are the 2 physical connections on "Tuner A (FBC) " actually Tuner A and B in the guides?

Yes they are.

See this thread
https://www.world-of-satellite.com/showthread.php?60640-GT-Sat-GT-dLNB1DY-and-tuner-configuration

[leinsterlegend]

Your tuners A-H are using the tuner card in tuner slot A


Yes they are.

See this thread
https://www.world-of-satellite.com/showthread.php?60640-GT-Sat-GT-dLNB1DY-and-tuner-configuration

Thank you. I read that thread but it said 1 physical wire. I have 2 physical wires attached to the same slot.
So does it make a difference having the second one attached?

[abu baniaz]

It does make a difference having two wires if using plugins like AutoBouquetsMaker and CrossEPG downloader.

Did you read post 2 of that thread? Supplying both tuners with signal cable is better. This is what you have done. Please note, I said tuners, not tuner cards. If you had two tuner cards, you would have had four tuner inputs.