PDA

View Full Version : Need Help


pk12
23-12-18, 16:45
Hi,
anyone help me.i using openatv image & try to openpli image.after the installation Multiboot press & rebooting start.after then in receiver display show (hd51 stb 4k)no thing work also remote cannot work.please help me.
i get hd51 STB 4K on display , but doesnt seem to have rebooted.
thanks.
pk12
23-12-18, 17:45
my issue solved.before power plugin i push the power button.after some time it will be rebooted with openatv image started.
pk12
23-12-18, 18:43
again before power plugin i push the power button please help me.
pk12
23-12-18, 19:28
my openATV image in STARTUP-2 but STARTUP-2 cannot show in Flash online.these shows in FLASH ONLINE(STARTUP --STARTUP-1--STARTUP-3 & STARTUP-4).how can i do
twol
23-12-18, 19:50
If it doesn‘t show then you may have a corrupted boot partition.
Access the receiver with filezilla (ip address, root, no password), then see whats in /boot
You should have STARTUP and STARTUP_1 ——> STARTUP_4
WHen you boot it will use STARTUP, so what is booting up ATV or ?
It would help if you could copy to a PC and then post the files here.

You would be better with ViX at least OpenViX tells you what image is in each multiboot slot - rather than the useless STARTUP information
pk12
23-12-18, 20:37
these boots files
STARTUP(boot emmcflash0.kernel2 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1')
STARTUP_1(boot emmcflash0.kernel1 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=1')
STARTUP_2(boot emmcflash0.kernel2 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1')
STARTUP_3(boot emmcflash0.kernel3 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p7 rw rootwait hd51_4.boxmode=1')
STARTUP_4(boot emmcflash0.kernel4 'brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p9 rw rootwait hd51_4.boxmode=1')
twol
23-12-18, 21:06
See PM...............
twol
23-12-18, 21:46
You should not be pushing the power button on the receiver.
Do everything via the remote
Long press the remotes power button and select multiboot then choose image you want to boot.
pk12
23-12-18, 21:50
help me what i can do.
twol
24-12-18, 08:50
To install OpenViX download and ftp to a library used by OpenATV to store downloads (HDD/usb) and use flashonline
For openpli download the multiboot version (there are 2 versions for the HD51 - one for multiboot, one for usb flashing) and then ftp to the receiver etc.
In OPenViX, you use the ViX plugin & ImageManager to do all this.