View Full Version : Satelite Tuner
I have a problem with one of my tuners , when I configure it the box will not work , I get "failed to scan on Tuner D " i have to set it to not configured
and the box will scan ok;
Is it most likely the tuner is broken
Was the box fitted with all tuners when you got it or you added some, i think i read the manual for some et boxes to have tuners fitted in a particular way and showed the wrong way?
Might be a help if you can say what tuners are for
A =?
B =?
C =?
D =?
Cactikid is correct, if you have a mix of dvb-S2 C/T tuners, then they need a specific slot order (which I have also forgotten - long time since I had my ET8500‘s)
I have them in correctly A is for terrestrial B C D satelite its just D that will not work
Try swapping B and D to see if problem moves also.+ maybe a reseating issue of tuner?
Oops swap sat cable over first to see if its that and have box powered off first.
Lnb issue same cable will be have the issue.
I checked and the connection to the tuner was a bit loose ,working now
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.