Req better support for 480p

[lincsat]

Any chance of improving scaling for 480p IPTV feeds?

Currently, 480p (704*480) is displayed squished into a letterbox, see pic. A 504p (896*504) stream displays properly. A deinterlaced USA SD feed is 480p, so there are several around

57863

[Trial]

Hi,
What are your video settings? Have you tried the auto resolution settings? 480p normally also needs 30Hz. Do you have a free example feed?

ciao

[lincsat]

That stream is 480p30. I have tried all the Auto Resolution but that appears to only support 480/576p24.

The only free feed that I had stored has been down for a while, many pay servers (both official and unofficial) have 480p channels, especially if they have a "Canada" section

[birdman]

That stream is 480p30. I have tried all the Auto Resolution but that appears to only support 480/576p24.Not exactly the same, but I've found a 480p30 mp4 file, downloaded it an put it on my box (Xtrend et8000).
I normally run with Auto-resolution disabled (works well for me). That displays the file OK.

If I enable auto-resolution and play the file then after a screen "blink" it reports the file is 480p30 and it will display it as 1080p30. Which also looks OK.

[Trial]

Hi,
do you have a file which makes also this problem? Perhaps you can share this so that we can take a look.

ciao

[lincsat]

OK, I've recorded part of a stream and upped it to my Google Drive


https://drive.google.com/file/d/1WgQH0MXjQroXHgrB-d3oiSw9pAIZ2ZI0/view?usp=sharing

[ronand]

That clip is letterboxed ie the resolution is 480 pixels including the bars top and bottom so the box is playing it correctly. As they say garbage in -> garbage out.