View Full Version : [VU+ Duo2] Just flashed 5.2.006
Hi All
I've just flashed image 5.2.006, my box is now having trouble reading the hard drive, I can't see any backups, I can't change the epg from internal memory, if I run Filesystem check I receive the error message in the attached image, I seem to able to connect to the hard drive via putty and filezilla but the folders seem to be empty, is there any steps I could take to save having to format the drive and start again
Andy_Hazza
03-11-18, 18:02
Have you tried rebooting your receiver n then setting a Mount up for the HDD?
Sent from my iPhone using Tapatalk
Hi Andy
Thanks for the quick reply, I've rebooted I now have a number of options "mount", "use as HDD", "setup mounts"
If I select mount I get "mount failed"
"use as HDD" appears to do nothing
"setup mounts" doesn't solve the problem
could I run fsck manually?
Andy_Hazza
03-11-18, 18:33
Do you have usb flash drives attached to your receiver as well?
Sent from my iPhone using Tapatalk
if select setup mounts I get this screen (see image attached)57678
Hi,
use left/right to get /hdd or media/hdd then save.
ciao
Hi Andy
I think I've tried that but I'll give it another go
Hi Andy
Didn't work unfortunately
tried blue button - vix ? Is it visible there ? If not try to start box with HDD not connected.Let it start , shut down , reconnect HDD and reboot.
57679
I think the can see the HDD (see Image)
If I press the blue button I see this
57680
I'll disconnect the HDD and see what happens
your HDD is visible but not mounted. Use blue button in screen to mount it.
If I try an mount it fails, I'll capture a screen shot
Hi Bellejt, thanks for helping, if press the blue "mount" button I get a fail message see image57681
strange .I would reflash the box and see what happens then.
Shall I initalize the disk first and start afresh, it's been a while since I reflashed via usb, quick question do I copy the duo2 folder to the root of the usb or the contains of the folder?
if you initialize the disk all your recordings will be gone. Just unzip file directly to a USB stick.
if you initialize the disk all your recordings will be gone. Just unzip file directly to a USB stick.
Morning all,
Still no luck I've tried image 5.2.006, 5.2.004 and 5.1.033 (the last image before the update), I'm still unable to mount the HDD, any suggestions?
Andy_Hazza
04-11-18, 10:06
I would initialise the HDD personally. I know you will lose everything that is on it, but at least it might spring it back into life. [emoji4]
Sent from my iPhone using Tapatalk
I found the following on the forum
If you know how to use putty from a pc/laptap you could try
init 4
umount -a
e2fsck -f -C 0 -v /dev/sda1
init 6
or
init 4
umount -a
fsck.ext4 /dev/sda1
init 6
I would initialise the HDD personally. I know you will lose everything that is on it, but at least it might spring it back into life. [emoji4]
Sent from my iPhone using Tapatalk
Hi Andy, thanks I give that a go
Hi Andy and Bellejt
Thank you very much for all your help, all sorted now
Andy_Hazza
04-11-18, 21:43
Glad to hear. [emoji4]
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.