Gigablue Quad DVB-T2 tuners the signal is bad when updating openvix

[tomzza]

Hello, l have GigaBlue HD Quad with internal dvb-t2 tuner. Picture go pixels if i Update software I try version 5.2.005 and 5.1.032-5.1.022 nothing work dvbt2 picture pixels. 5.1.021 last version where tunes work properly. i try my secend Gigablue same. something has changed in the latest software dvbt2 driver maybe?
I live Finland (scandinavia)

Working versio
OE-järjestelmä: OE-Alliance 4.1
Ohjelmisto: OpenViX 5.1.021 (2018-03-20)
Kernel / Ajurit: 4.8.3 / 20170726
Viritin A BCM7346 DVB-S2 NIM (internal) (DVB-S2)
Viritin B BCM7346 DVB-S2 NIM (internal) (DVB-S2)
Viritin C GIGA DVB-T2/C NIM (TT2L10) (DVB-T2)57662

[divil_a_bit]

I have the same problem on OpenATV. Everything was fine with 6.1, moved to 6.2 and dvbt tuner reception is poor after a reboot. Run abm again after boot and channels are fine again

[tomzza]

Not help i try fresh install build 5.2.011 not work tuner dvbt signal 55% and bad picture rolling back build version 5.1.021 and dvbt signal 100% picture perfect. something has changed in the software Openvix builds why it does not work anymore..

[Willo3092]

My opticombo usb tuner dvb t/c doesn't work at all since ViX 5.2.
It appears in the tuner list and ABM can scan for channels but no picture on anything.

EDIT: Cancel that, it's working now. I don't know if anything changed but it didn't work on 5.2.001 but it does on 5.2.011 :whistle:

[tomzza]

I fixed the my problem it's dvb-t driver ...
I take the older version of the driver build 5.1.021. Driver name file dvb.ko location lib / modules / 4.8.3 / extra / and copy that build 5.2.013 and restart box. Now SNR 100% and AGC 100%.

[birdman]

I fixed the my problem it's dvb-t driver ...
I take the older version of the driver build 5.1.021. Driver name file dvb.ko location lib / modules / 4.8.3 / extra / and copy that build 5.2.013 and restart box. Now SNR 100% and AGC 100%.Odd, given that the driver hasn't changed recently and so that file should be the same in the 5.1.x and 5.2.x series.

[tomzza]

Sorry my mistake its build 5.0.21 not 5.1.21.
Build 5.0.21 and working 10.1mb
Build 5.2.13 not work 9.64mb
Here link my google drive you can check your self if want.
https://drive.google.com/drive/folders/1CaPFfB9PC1uGCbj-2tCGpagfWP1SY85f?usp=sharing

[birdman]

Sorry my mistake its build 5.0.21 not 5.1.21.OK, then the driver has changed.
There's also anther one that was released between those two.

57857

Any chance you could see whether that one is OK or suffers break-up?

[twol]

[QUOTE=tomzza;477998]Sorry my mistake its build 5.0.21 not 5.1.21.
Build 5.0.21 and working 10.1mb
Build 5.2.13 not work 9.64mb
Here link my google drive you can check your self if want.
https://drive.google.com/drive/folders/1CaPFfB9PC1uGCbj-2tCGpagfWP1SY85f?usp=sharing[/QUOTE


What are your AV settings? Can you screenshot them?

You also say that 5.0.22 does not work (post #1) but there is no driver change between 021 and 022 ...022 was 23/3 and the GB driver change was 30/3

Lastly are you using a CI card??

[tomzza]

Here me av setting
57858
Not using Ci card
I have 2 Gigablue quad hd box dvb-t both did not work signal only 50% bad picture. before i take dvb.ko file 5.0.21 --> update box 5.2.13 --> move dvb.ko (0.21) and work dvb-t signal 100%
I move birdman driver version box and 100% signal work well single dvb-t2 tuner. other box where is 2 dvb-t2 tuner singal 100% but picture bad
57859
'

[twol]

Thannks for the fast response.

Can you confirm that 5.0.22 does not work ?

Just trying to confirm exactly when it started .. although as Birdman has found it “looks“ like a driver issue but the previous question and answer is important!

Also you have one box single tuner and the other box has dual tuner or 2 x single tuner??
If the Birdman driver version (that contains most of the changes) works in the single tuner, the only real change in the 2nd driver update was apparently to fix dual pnp tuners.

So illogical but we should also copy over the 2nd driver update as well and test.

[tomzza]

Hello, i have only single tuners, i start testing today i flash back 5.0.21 and check
exactly as it started, fresh installation, checking dvb.ko file size i report back night.

[twol]

Hello, i have only single tuners, i start testing today i flash back 5.0.21 and check
exactly as it started, fresh installation, checking dvb.ko file size i report back night.
OK, many thanks.
Strange that the receiver with 1 T2 tuner is OK, and the other with 2 x T2 is not OK with the drivers from 29th March.
Really need to know which builds work for you and when it breaks, as not only driver changes but many E2 changes in that period.

[tomzza]

TESTED
Fresh image nothing install only config dvb-t setting finland.
/openvix-builds/GiGaBlue-HD-QUAD/Archives missing build 5.1.023
5.1.022 working signal 100% single tuner and 2 x single tuner both fine.
5.1.024 not work signal 50% bad picture single tuner and 2 x single tuner not working.
Exactly when it started: 5.1.024
dvb.ko 10.1mb (022)
dvb.ko 9.64mb (024)
Google drive both lib file location link:

https://drive.google.com/open?id=147HKi1EVqufquMdYpGhfVfxrAi6gCDmv

[twol]

Ok, there was no 5.1.023 release built ... hence not found.
Can you possibly copy the drivers from 5.1.024 to .021 or .022 and see what happens?!
..just want to make sure the changes in 024 didn‘t cause anything.

Lastly, do you only have T2 tuners or are other tuners installed pnp or usb? ... I am just wondering why your 2 x T2 receiver had issues with the 029a (29/3/2018) drivers ... sometimes thats down to the tuner slot (power)

[tomzza]

PnP tuners
Flashing 5.1.021 build, moving file dvb.ko 5.1.024 version: Signal 50% bad picture (single tuner)

I am just wondering why your 2 x T2 receiver had issues with the 029a (29/3/2018) drivers ... sometimes thats down to the tuner slot (power)
Maybe that day weather (heavy snow) or tuner power but only that day.

[twol]

Thanks for all your hard work - have to see where we go next.
In the meantime as long as Kernel does not change you can copy over the drivers from .021