View Full Version : VU+ duo Stream
Hi all
I am trying to stream my VU+ Duo so i can view channels from an external PC or my phone. i want to try and watch some channels while i am at work.
Can someone provide me some assistance in how i set this up. If someone has a step to step guide this would be useful. I am using a NETGEAR Router which is connected to the box.
Thanks for your assistance in this issue
Hi digicell,
Have a read of this sticky firstly:
http://www.world-of-satellite.com/showthread.php?656-Remote-Access-Remotely-access-your-reciever
Then read this one:
http://www.world-of-satellite.com/showthread.php?3643-Guide-to-stream-your-VU-Duo-over-the-WEB-using-VLC
I havent tried to use VLC as yet, I was attempting to get AirVideo server working to stream to my iPhone! I'm having trouble with my Vu Duo being password protected.
Good luck!!
how do i set remote desktop to access my home PC from an external location?
Hi
I am trying to follow the guide you have provided the link for and I am trying to forward the port 01222 which is what is set on my Web Interface section in my VUDUO
Can you tell me what I need to fill in in the screenshot attached?
5928
Please can someone help me - I am trying to set my netgear WPN824v2 router so that i can view my box on another pc outside my home
Use port 01222 in both boxes.
Use port 01222 in both boxes.
I put this number into the two boxes and in the IP address box i put in the IP Address (local) of the BOX (192.168.1.6) but I dont know what else i need to do as its not working when i open a browser and type the dyndns.org address folowed by 01222
I put this number into the two boxes and in the IP address box i put in the IP Address (local) of the BOX (192.168.1.6) but I dont know what else i need to do as its not working when i open a browser and type the dyndns.org address folowed by 01222
Are you testing on a pc within your own network or outside it?
Hi digicell,
Have a read of this sticky firstly:
http://www.world-of-satellite.com/showthread.php?656-Remote-Access-Remotely-access-your-reciever
Then read this one:
http://www.world-of-satellite.com/showthread.php?3643-Guide-to-stream-your-VU-Duo-over-the-WEB-using-VLC
I havent tried to use VLC as yet, I was attempting to get AirVideo server working to stream to my iPhone! I'm having trouble with my Vu Duo being password protected.
Good luck!!
Thanks for the post. am following this thread and will give a go by weekend.
I tried typing in 192.168.1.6 on the same network but it doesnt work i also tried xxx.dyndns.org:1222 and thta doesnt bring up anything.
can you please list out step by step exactly what i need to do?
I would appreciate that.
Hi digicell,
Here are the steps I used:
1. Changed my WebInterface settings to use port 1222
2. Internal network, 192.168.1.6:1222 to access box (192.168.1.6 VuDuo ip)
3. External access, WAN:
3.1. Set up account on www.dyndns.com and added router WAN ip
3.2. Download DynDns update client, keeps your WAN ip in sync with your dyndns Acc
3.3. Set up port forward on router to VuDuo (Port 1222 to 192.168.1.6)
3.4. On external pc, http://xxxx.dyndns.com:1222/
I also had to alter my firewall from Medium to Low on the router as Medium level was blocking external access to my network. This might just be related to Netopia routers however!
And that was it, hope this helps!
I tried typing in 192.168.1.6 on the same network but it doesnt work i also tried xxx.dyndns.org:1222 and thta doesnt bring up anything.
can you please list out step by step exactly what i need to do?
I would appreciate that.
Whats the IP of your Duo? The dyndns will only work outside of your network. You need to post forward to the IP address of your receiver.
I click virtual server on my router and its asking me for user name and passworld. Anybody have idea where i can get this? Thanks
Hi jfk,
My router defaults to:
Username: admin
Password: (blank, not set)
Try this, not sure if this is a standard though! If you are enabling remote access I'd set a password though, not a good idea to leave your network unprotected..
Good luck!
I got bellow after login, Can somebody tell me what to do next? thanks
Virtual Server Configuration
DMZ HostPort ForwardingDynamic DNS ALG
DMZ Host Help
A DMZ host is a computer on your local network that can be accessed from the Internet regardless of port forwarding and firewall settings.
Those IP packets from the Internet that do NOT belong to any applications configured in the port forwarding table will be:
Discarded
Forwarded to the DMZ host
IP address of DMZ host:
What router have you got ?
What router have you got ?
My router is BT Voyager 2110 (wireless adsl)
My router is BT Voyager 2110 (wireless adsl)
Hi Jfk, No disrespect but it would help if you created your own thread - LIKE I DID as THIS WAS MY THREAD I CREATED TO RESOLVE THE WEB ACCESS PROBLEM.
I am using NETGEAR WPN824v2 router and my local IP Address of the box is 192.168.1.6
In my VU DUO I went to plugins > Web Server seciton and set the port from 80 to 1222 however when i type in 192.168.1.6 in a laptop in the same network it doesnt load the VU Page
In the router setup under PORTFORWARDING I put the following
Service Name - VUDUO
Service Type - UDP/TCP
Starting port - 1222
Ending port - 1222
server IP add - 192.168.1.6
I currently use vlc. I have a separate shortcut (on PC Win XP SP2) for each channel that I typically watch. That is all I needed!!!
Example Shortcut:
Target:
"C:\Program Files\VideoLAN\VLC\vlc.exe" http://192.168.1.6:8001/1:0:1:133:3:69:6180000:0:0:0: --program="307" --crop="16:10"
Start in:
"C:\Program Files\VideoLAN\VLC"
In this example, the Vu+Duo is at 192.168.1.6
the program option selects the correct service ID in decimal because VLC is not clever enough to grab the 133 hexidecimal out of the stream specificied.
the crop option just gets rid of some of letter box effects.
This example is for Southern Cross TV channel 7 Central which comes off Optus C1 to Australia.
Hi Jfk, No disrespect but it would help if you created your own thread - LIKE I DID as THIS WAS MY THREAD I CREATED TO RESOLVE THE WEB ACCESS PROBLEM.
I am using NETGEAR WPN824v2 router and my local IP Address of the box is 192.168.1.6
In my VU DUO I went to plugins > Web Server seciton and set the port from 80 to 1222 however when i type in 192.168.1.6 in a laptop in the same network it doesnt load the VU Page
In the router setup under PORTFORWARDING I put the following
Service Name - VUDUO
Service Type - UDP/TCP
Starting port - 1222
Ending port - 1222
server IP add - 192.168.1.6
Hi Digicell,
I dont think i needed to creat my own thread since we both aiming to achieve the same thing but with different router. This will help other users in the forum to narrow their seach and be able to resolve their issues.
OK No problem makes sense :)
I get a message saying somehting like "cannot read network on 192.168.1.6:01222" on my box
I am not sure why this is - I followed the instructions but it is still not working
If someone can provide a detailed stp by step process that would be great.
Hi Digicell,
I dont think i needed to creat my own thread since we both aiming to achieve the same thing but with different router. This will help other users in the forum to narrow their seach and be able to resolve their issues.
I have have also follow the step but not working for me as well. I tried to login outside my network but no joy. may be mr. bobonthejob can please help us to resolve this issue.
I have have also follow the step but not working for me as well. I tried to login outside my network but no joy. may be mr. bobonthejob can please help us to resolve this issue.
Can someone please help me out?
i would appreciate some help please?
I tried typing in 192.168.1.6 on the same network but it doesnt work i also tried xxx.dyndns.org:1222 and thta doesnt bring up anything.
can you please list out step by step exactly what i need to do?
I would appreciate that.
Hi mate,
within ur network work try step 2- as mcquaim
quote 2. Internal network, 192.168.1.6:1222 to access box (192.168.1.6 VuDuo ip). it worked for me last night. I will also try outside my network at work today. hopefully it work.
Hi mate,
within ur network work try step 2- as mcquaim
quote 2. Internal network, 192.168.1.6:1222 to access box (192.168.1.6 VuDuo ip). it worked for me last night. I will also try outside my network at work today. hopefully it work.
when I type '192.168.1.6' it comes with Cannot display page error message. It doesnt even let me go into the VU Web page
Hi digicell,
Here are the steps I used:
1. Changed my WebInterface settings to use port 1222
2. Internal network, 192.168.1.6:1222 to access box (192.168.1.6 VuDuo ip)
3. External access, WAN:
3.1. Set up account on www.dyndns.com and added router WAN ip
3.2. Download DynDns update client, keeps your WAN ip in sync with your dyndns Acc
3.3. Set up port forward on router to VuDuo (Port 1222 to 192.168.1.6)
3.4. On external pc, http://xxxx.dyndns.com:1222/
I also had to alter my firewall from Medium to Low on the router as Medium level was blocking external access to my network. This might just be related to Netopia routers however!
And that was it, hope this helps!
HI Digicell,
I have follow the above step and it work for my like chatm both home and away from home. I will like to say many thanks to mcqualm and other for their help. If you are having any defficulty you can let me know.
when I type '192.168.1.6' it comes with Cannot display page error message. It doesnt even let me go into the VU Web page
Hi Digicell,
Please type 192.168.1.6:1222 on address bar and it will definatly work. it worked for me like charm!
Hi Digicell,
Please type 192.168.1.6:1222 on address bar and it will definatly work. it worked for me like charm!
its not working for me :(
Can you write those steps in a little bit more details perhaps i am doing something wrong which is very small...i would appreciate if someone can help me out
did you do the ":1222" bit at the end of the ip address?
Also, can you ping the box on that ip?
its not working for me :(
Can you write those steps in a little bit more details perhaps i am doing something wrong which is very small...i would appreciate if someone can help me out
As Rob76 quoted above, try and make sure the box ip is the same as you have in ur post. double check you vertual config on the router and make sure everything is set up properly. dont forget make sure you press saved after doing the router config for port forwarding. its depend on the router anyway.
I can ping to the local IP from a PC in the same network - The box is 192.168.1.2 and I am using a wireless dongle to connect to my Netgear Router.
I am not 100% sure how to config the Netgear Router I selcted PORT FORWARDING and then > Add Customer Server. I then added following
Start Port - 01222
End Port - 01222
In the Plugins Menu I selected Web Interface and I have HTTP number set to 01222 and there is another number nearer the bottom which is set to 04432 (Somehting like that)
I am using Netgear WPN824v2 Router
I have just checked and in Web Interface I have this:
HTTP Port = 01222
HTTPS Port = 00433
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.