Switching from TV to Radio

[Hebridean]

I was expecting to be able to do this by using the TV/Radio button on the remote but this is not happening. :confused:

Can someone tell me how to switch between TV stations to Radio Stations.

[Andy_Hazza]

I was expecting to be able to do this by using the TV/Radio button on the remote but this is not happening. :confused:

Can someone tell me how to switch between TV stations to Radio Stations.

If using ABM (AutoBouquetsMaker) then you should have TV & Radio Channels.


Sent from my iPhone using Tapatalk

[Hebridean]

If using ABM (AutoBouquetsMaker) then you should have TV & Radio Channels.


Sent from my iPhone using Tapatalk

I can access the radio channels by doing a search for a particular radio station, but I am unable to 'pull up' the list of radio stations (replacing the TV channels).

The radio stations do not appear anywhere in the list of TV channels.

[Andy_Hazza]

The radio stations do not appear anywhere in the list of TV channels.

I’ve pressed the Radio button (bottom right on my Vu+ remote) and that brings up my Radio channels.

Not sure how you have created your Channels so can’t help any further until you do so.



Sent from my iPhone using Tapatalk

[Hebridean]

I used the ABM on both tuners as far as I know and as it was scanning it was listing radio stations as well as TV channes.

I will have a bit more time at the weekend to play about with the STB.

[Andy_Hazza]

So pressing the TV/RADIO button doesn’t flick between the TV Channels & Radio Channels?

I presume you are doing this while watching TV. Doing this as in pressing the TV/RADIO button while viewing BBC 1 HD for instance?


Sent from my iPhone using Tapatalk

[birdman]

So pressing the TV/RADIO button doesn’t flick between the TV Channels & Radio Channels? I've never understood the need for this. The service descriptor knows whether it is TV or radio, so why do you need to switch between two modes using a remote?
I have all of my Radio services in the TV bouquets and I just switch to the bouquet that has the Radio channels (or, far more likely, just press the channel number). I also have exactly the same set of bouquets under the Radio bouquet - that works too.

[I don't use ABM, so don't know whether you can achieve this there.]

[Trial]

Hi birdman,
2 reasons:
1. elder people know TV and Radio but not a combination:-)
2. when you use a more advanced remote like the Harmony you can create 2 activities and in only 1 is the TV active.

ciao

[Hebridean]

I've never understood the need for this.

When you put your STB into standby it remains on the channel you were last viewing/listening to. If you dont have a TV licence and you have a visit from TVL and they switch your TV on then they can accuse you of watching TV without a licence. Of course, you are allowed to listen to radio, watch on demand and catchup.

[Hebridean]

So pressing the TV/RADIO button doesn’t flick between the TV Channels & Radio Channels?

I presume you are doing this while watching TV. Doing this as in pressing the TV/RADIO button while viewing BBC 1 HD for instance?

Yes, if I press the TV/RADIO button the screen shows the TV channels on the left in groups format. If I scroll to the bottom of the list there is an entry Last Scanned - if I open that up and scroll down that list, the radio stations are shown and I can select one and it opens up in the PIP window on the right and plays the radio station.

If I then use the Exit button, it then returns to the previous TV show that I was watching.

QUESTION: What does your STB do when you use the TV/RADIO button, select a radio station and play the station, then use the Exit button?

[Andy_Hazza]

Yes, if I press the TV/RADIO button the screen shows the TV channels on the left in groups format. If I scroll to the bottom of the list there is an entry Last Scanned - if I open that up and scroll down that list, the radio stations are shown and I can select one and it opens up in the PIP window on the right and plays the radio station.

If I then use the Exit button, it then returns to the previous TV show that I was watching.

QUESTION: What does your STB do when you use the TV/RADIO button, select a radio station and play the station, then use the Exit button?

When I press the Radio button I am presented with all my available Radio channels and I just scroll through to the one I want to listen. [emoji4]


Sent from my iPhone using Tapatalk

[adm]

Of course, you are allowed to listen to radio, watch on demand and catchup.

If in the UK try checking the rules on that!



http://www.tvlicensing.co.uk/about/foi-legal-framework-AB16


A visit to your premises is not required to establish watching on demand and catchup.

[Hebridean]

When I press the Radio button I am presented with all my available Radio channels and I just scroll through to the one I want to listen. [emoji4]


Sent from my iPhone using Tapatalk

So, does what you have said mean that the Vix installation for my Alpha+ Plus isn't working correctly and if so, how can I get it fixed?

[birdman]

When you put your STB into standby it remains on the channel you were last viewing/listening to. If you dont have a TV licence and you have a visit from TVL and they switch your TV on then they can accuse you of watching TV without a licence. Of course, you are allowed to listen to radio, watch on demand and catchup.A TV licence is for owning a capable device, not the use of a capable device.

[birdman]

Hi birdman,
2 reasons:
1. elder people know TV and Radio but not a combination:-)So they'll have an issue with any Freeview TV, as that just has one list.

[abu baniaz]

Does the function work if you use the webinterface remote? Using your browser on PC, enter the ip address of receiver in address bar.

Unless you have IPTV, can you attach your lamedb file and files ending in .tv and .radio. They will be in /etc/enigma2/ You will need to zip the files before you can attach to the forum.

Can you also attach a debug log showing you attempting the switch between modes?

[Hebridean]

@abu baniaz My circumstances have changed and I no longer need the direct access to the radio channels. If this issue is going cause you a lot of unecessary work then I am happy to live with having to select the radio channels they way I did before. If you would like me to still do the tests for you then that is OK as well.

Please let me know, Thanks

[abu baniaz]

It's meant to work. Might just be the keymap needing to be updated. Please conduct webif remote test.

[Hebridean]

It's meant to work. Might just be the keymap needing to be updated. Please NB conduct webif remote test. OK will do.

[Hebridean]

Does the function work if you use the webinterface remote? Using your browser on PC, enter the ip address of receiver in address bar. I have got the webinterface up and found the remote link but it doesn't do anything. Not sure if I was doing things correctly though.