PDA

View Full Version : VU+ Turbo USB DVB-C/T2 driver for Formuler F1



nfegan
02-05-18, 21:51
Was hoping I could use a VU+ Turbo USB DVB-C/T2 with a Formuler F1 box, but I don't see the Turbo Tuner driver listed. Is there a compatible driver that I can get to allow me to use VU+ USB tuner on an F1? I'm using OpenATV.

ccs
02-05-18, 21:54
The spec says "Suitable for all VU+ Models", so I doubt it will work.

ronand
02-05-18, 22:39
AFAIK there is a check for the receiver brand in the driver installation so the driver won't install on a non-VU receiver. I don't think there are any technical reasons why the device wouldn't work but without the driver it won't happen. I use a cheap RTL-SDR dongle and it works fine for Saorview and the drivers are in the feeds.

birdman
03-05-18, 01:49
The spec says "Suitable for all VU+ Models", so I doubt it will work.Not necessarily the case. Linux just cares about the internal chipset, so if that is supported it should work.

Sicilian
03-05-18, 05:46
It's only suitable for VU+ receivers.