View Full Version : Cannot find "Hrtunerproxy" plugin in systemsplugin (latest openvix image)
Hi,
I have install today the latest openvix image (5.1.919 - 2018.02.20). I noticed that on the systemplugins section I do not have the plugin "Hrtunerproxy". Do I need to change the plugins repository? I also notice I do not have the "cams" sections.
Is it available the hrtunerproxy in ipk format?
My box is a vu+ solo2
Thank you
The problem is that the vu solo2 feeds to NOT contain reference to this plugin. When I switch the feeds to vu duo2 (which uses same architecture) I was able to download via opkg the HRTunerProxy. Thus the temporary solution for the problem is to go to /etc/opkg and edit the file "mips32el-feed.conf" by adding a # to the vusolo2 feed and new feed for the duo2:
src/gz openvix-mips32el http://www.openvix.co.uk/feeds/openvix/release/5.1/vuduo2/mips32el
#src/gz openvix-mips32el http://www.openvix.co.uk/feeds/openvix/release/5.1/vusolo2/mips32el
save the file and do an opkg update && opkg list | grep HRTuner you should see the reference to the plugin. Finally usual procedure to install the plugin: opkg install enigma2-plugin-systemplugins-hrtunerproxy
Hope openvix team fixes the vusolo2 feeds (i.e cams feeds).
Cheers
I can't find any problem with the feeds. The ipk is present and listed in Packages.
I can't find any problem with the feeds. The ipk is present and listed in Packages.
Hi! I have download the Package.gz for the vusolo2 and, in fact, the hrtunerproxy is referenced there. Nevertheless I had issues pushing the package maybe a lack of updating the opkg lists.
One last question, I do not have a feed for softcams is that remove from the official image?
Thank you
I suggest you do a fresh flash and check again. I've checked current feeds and softcams are there.
Strange. I have just done fresh flash5.1.020(no restores) on my Mutant HD51.
No hrtunerproxy in plugins. Or Softcams.
OpenWebif, settings/packages (on ET10k, 5.1.019) comes up with....
enigma2-plugin-systemplugins-hrtunerproxy (4.0-8-gcc10ff9-r0)
Setup Enigma2 to act as HR-Tuner Proxy Setup Enigma2 to act as HR-Tuner Proxy
enigma2-plugin-systemplugins-hrtunerproxy-dbg (4.0-8-gcc10ff9-r0)
Setup Enigma2 to act as HR-Tuner Proxy - Debugging files Setup Enigma2 to act as HR-Tuner Proxy This package contains ELF symbols and related sources for debugging purposes.
enigma2-plugin-systemplugins-hrtunerproxy-dev (4.0-8-gcc10ff9-r0)
Setup Enigma2 to act as HR-Tuner Proxy - Development files Setup Enigma2 to act as HR-Tuner Proxy This package contains symbolic links, header files, and related items necessary for software development.
enigma2-plugin-systemplugins-hrtunerproxy-po (4.0-8-gcc10ff9-r0)
systemplugins-hrtunerproxy (translations) systemplugins-hrtunerproxy (translations)
enigma2-plugin-systemplugins-hrtunerproxy-src (4.0-8-gcc10ff9-r0)
systemplugins-hrtunerproxy (source files) systemplugins-hrtunerproxy (source files)
OpenWebif, settings/packages showing nothing for hrtunerproxy for hd51. Or Oscam latest.
under system plugins two are showing
Nothing showing in mine. Confused:confused:
confused! just checked and now showing one hrtunerproxy there were two earlier
I will check my VU+ duo 2 later and see if these plugins are missing from its feeds.(can't access it at the moment)
In the meantime i'll manually install HPTunerProxy and oscam latest.
I will check my VU+ duo 2 later and see if these plugins are missing from its feeds.(can't access it at the moment)
In the meantime i'll manually install HPTunerProxy and oscam latest.
Update on missing plugins.
VU+ Duo 2 Softcams menu showing. Hrtunnerproxy showing in extensions.
Mutant HD 51. None of these showing. See picture of main plugin menu.
56384
abu baniaz
18-03-18, 17:12
Issue the following command and post back the output
opkg update
Maybe I shouldn't say this, but last week, from menu/setup, ViX (the last item in the list) was missing. (5.1.019)
I put it down to finger trouble using FileZilla for the very first time.:confused:
Even had to usb flash for the first time in a long time as imagemanager had gone.
root@mutant51:~# opkg update
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/3rdparty/Packages.gz
Updated source 'openvix-3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/all/Packages.gz
Updated source 'openvix-all'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/cortexa15hf-neon-vfpv4/Packages.gz
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51/Packages.gz
Updated source 'openvix-hd51'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51_3rdparty/Packages.gz
Updated source 'openvix-hd51_3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/mutant51/Packages.gz
Updated source 'openvix-mutant51'.
abu baniaz
18-03-18, 17:52
You pasted lines in two sections. Can you try again please? If you are going to paste, can you expand the window so it fitson one line.
I would just copy and paste the whole lot,
root@mutant51:~# opkg update
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/3rdparty/Packages.gz.
Updated source 'openvix-3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/all/Packages.gz.
Updated source 'openvix-all'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51/Packages.gz.
Updated source 'openvix-hd51'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51_3rdparty/Packages.gz.
Updated source 'openvix-hd51_3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/mutant51/Packages.gz.
Updated source 'openvix-mutant51'.
root@mutant51:~#
mutant51 login: root
Last login: Sun Mar 18 16:22:06 GMT 2018 on pts/0
root@mutant51:~# opkg update
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/3rdparty/Packages.gz.
Updated source 'openvix-3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/all/Packages.gz.
Updated source 'openvix-all'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51/Packages.gz.
Updated source 'openvix-hd51'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51_3rdparty/Packages.gz.
Updated source 'openvix-hd51_3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/mutant51/Packages.gz.
Updated source 'openvix-mutant51'.
root@mutant51:~#
abu baniaz
18-03-18, 18:14
Thanks. If you download those package files, the softcams are listed. As an example,
Package: enigma2-plugin-softcams-oscam-latest
Version: 1.20+svn11398-r1
Depends: libc6 (>= 2.25), libcrypto1.0.0 (>= 1.0.2k), libssl1.0.0 (>= 1.0.2k)
Provides: openvix-softcams-oscam-latest-arm
Section: base
Architecture: cortexa15hf-neon-vfpv4
I don't have the receiver so I can't debug for you.
Can you post a debug log showing you going into the plugins download section please?
< 37.932> [eInputDeviceInit] 1 8b 1
< 37.933> [InfoBarGenerics] KEY: 139 MENU
< 37.933> [ActionMap] InfobarMenuActions mainMenu
< 37.939> [Skin] processing screen Menu:
< 37.979> [Skin] processing screen MenuSummary:
< 38.135> [eInputDeviceInit] 0 8b 1
< 38.136> [InfoBarGenerics] KEY: 139 MENU
< 39.955> [eInputDeviceInit] 1 6c 1
< 39.957> [InfoBarGenerics] KEY: 108 DOWN
< 40.159> [eInputDeviceInit] 0 6c 1
< 40.160> [InfoBarGenerics] KEY: 108 DOWN
< 40.499> [eInputDeviceInit] 1 160 1
< 40.501> [InfoBarGenerics] KEY: 352 OK
< 40.501> [ActionMap] OkCancelActions ok
< 40.505> [Skin] processing screen PluginBrowser:
< 40.543> [Skin] processing screen PluginBrowserSummary:
< 40.703> [eInputDeviceInit] 0 160 1
< 40.704> [InfoBarGenerics] KEY: 352 OK
< 41.384> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 42.510> [eInputDeviceInit] 1 18f 1
< 42.512> [InfoBarGenerics] KEY: 399 GREEN
< 42.719> [eInputDeviceInit] 0 18f 1
< 42.720> [InfoBarGenerics] KEY: 399 GREEN
< 42.720> [ActionMap] ColorActions green
< 42.721> [OnlineUpdateCheck][adapterAvailable] PASSED
< 42.743> [OnlineUpdateCheck][NetworkUp] PASSED
< 43.271> [OnlineUpdateCheck][kernelMismatch] no kernel mismatch found
< 43.276> [Skin] processing screen PluginDownloadBrowser:
< 43.309> [OnlineUpdateCheck][adapterAvailable] PASSED
< 43.329> [OnlineUpdateCheck][NetworkUp] PASSED
< 43.329> [OnlineUpdateCheck][getFeedStatus] Checking feeds state
< 43.908> [OnlineUpdateCheck][getFeedStatus] PASSED: stable
< 43.908> [OnlineUpdateCheck][getFeedsBool] stable
< 43.908> [eConsoleAppContainer] Starting /bin/sh
< 43.910> [Skin] processing screen SimpleSummary:
< 46.625> [eConsoleAppContainer] Starting /bin/sh
< 48.823> [eInputDeviceInit] 1 6c 1
< 48.824> [InfoBarGenerics] KEY: 108 DOWN
< 49.031> [eInputDeviceInit] 0 6c 1
< 49.032> [InfoBarGenerics] KEY: 108 DOWN
< 49.099> [eInputDeviceInit] 1 6c 1
< 49.100> [InfoBarGenerics] KEY: 108 DOWN
< 49.303> [eInputDeviceInit] 0 6c 1
< 49.304> [InfoBarGenerics] KEY: 108 DOWN
< 49.340> [eInputDeviceInit] 1 6c 1
< 49.340> [InfoBarGenerics] KEY: 108 DOWN
< 49.543> [eInputDeviceInit] 0 6c 1
< 49.544> [InfoBarGenerics] KEY: 108 DOWN
< 49.551> [eInputDeviceInit] 1 6c 1
< 49.551> [InfoBarGenerics] KEY: 108 DOWN
< 49.759> [eInputDeviceInit] 0 6c 1
< 49.760> [InfoBarGenerics] KEY: 108 DOWN
< 49.789> [eInputDeviceInit] 1 6c 1
< 49.790> [InfoBarGenerics] KEY: 108 DOWN
< 49.943> [eInputDeviceInit] 0 6c 1
< 49.944> [InfoBarGenerics] KEY: 108 DOWN
< 49.988> [eInputDeviceInit] 1 6c 1
< 49.989> [InfoBarGenerics] KEY: 108 DOWN
< 50.191> [eInputDeviceInit] 0 6c 1
< 50.192> [InfoBarGenerics] KEY: 108 DOWN
< 50.221> [eInputDeviceInit] 1 6c 1
< 50.222> [InfoBarGenerics] KEY: 108 DOWN
< 50.375> [eInputDeviceInit] 0 6c 1
< 50.376> [InfoBarGenerics] KEY: 108 DOWN
< 50.448> [eInputDeviceInit] 1 6c 1
< 50.449> [InfoBarGenerics] KEY: 108 DOWN
< 50.655> [eInputDeviceInit] 0 6c 1
< 50.656> [InfoBarGenerics] KEY: 108 DOWN
< 50.832> [eInputDeviceInit] 1 160 1
< 50.833> [InfoBarGenerics] KEY: 352 OK
< 50.833> [ActionMap] WizardActions ok
< 51.039> [eInputDeviceInit] 0 160 1
< 51.040> [InfoBarGenerics] KEY: 352 OK
< 52.482> [eInputDeviceInit] 1 ae 1
< 52.483> [InfoBarGenerics] KEY: 174 EXIT
< 52.484> [ActionMap] WizardActions back
< 52.512> [PluginComponent] Plugin Extensions/WebInterface failed to load: No module named plugin
< 52.799> [eInputDeviceInit] 0 ae 1
< 52.800> [InfoBarGenerics] KEY: 174 EXIT
< 53.129> [eInputDeviceInit] 1 ae 1
< 53.131> [InfoBarGenerics] KEY: 174 EXIT
< 53.131> [ActionMap] WizardActions back
< 53.335> [eInputDeviceInit] 0 ae 1
< 53.336> [InfoBarGenerics] KEY: 174 EXIT
< 54.195> [eInputDeviceInit] 1 ae 1
< 54.197> [InfoBarGenerics] KEY: 174 EXIT
< 54.197> [ActionMap] OkCancelActions cancel
< 54.511> [eInputDeviceInit] 0 ae 1
< 54.512> [InfoBarGenerics] KEY: 174 EXIT
Thanks. If you download those package files, the softcams are listed. As an example,
Package: enigma2-plugin-softcams-oscam-latest
Version: 1.20+svn11398-r1
Depends: libc6 (>= 2.25), libcrypto1.0.0 (>= 1.0.2k), libssl1.0.0 (>= 1.0.2k)
Provides: openvix-softcams-oscam-latest-arm
Section: base
Architecture: cortexa15hf-neon-vfpv4
I don't have the receiver so I can't debug for you.
Can you post a debug log showing you going into the plugins download section please?
Thanks Abu.
Memory fade(old age). Whats the best way to update/download these packages to the box.
abu baniaz
18-03-18, 19:58
You already did by using the opkg update command.
You already did by using the opkg update command.
Sorry. What I meant to ask is now the packages are downloaded is there anything I need to do to make the missing plugins show as they are still not showing.
abu baniaz
19-03-18, 01:29
Are you going to upload your debug log?
abu baniaz
19-03-18, 03:23
Can you also try following:
Flash "virgin" image again, i.e an image from download site, not a backed-up image. Do not restore settings or plugins.
Can you also try following:
Flash "virgin" image again, i.e an image from download site, not a backed-up image. Do not restore settings or plugins.
56398 Fresh flash. No restore. No plugins.
abu baniaz
19-03-18, 19:04
OK, that logs shows you installing samba and receiver restarting..Can you show log of you going to into plugins so that we can hopefully see the problem
I went into the plugins before I unsuccessfully tried to install Samba.
I will repeat and send new logs.
:confused:
It is there in Packages and ipk is present.
Package: enigma2-plugin-systemplugins-hrtunerproxy
Version: 4.0-8-gcc10ff9-r0
Depends: python-argparse
Replaces: enigma2-plugin-systemplugins-plexdvrapi
Conflicts: enigma2-plugin-systemplugins-plexdvrapi
Section: base
Architecture: cortexa15hf-neon-vfpv4
Maintainer: OpenViX
MD5Sum: 4a17fb44b70355b1f488022397cf3ccb
Size: 41664
Filename: enigma2-plugin-systemplugins-hrtunerproxy_4.0-8-gcc10ff9-r0_cortexa15hf-neon-vfpv4.ipk
Source: git://github.com/OpenViX/HRTunerProxy.git;protocol=git
Description: Setup Enigma2 to act as HR-Tuner Proxy
Setup Enigma2 to act as HR-Tuner Proxy
OE: enigma2-plugin-systemplugins-hrtunerproxy
License: Proprietary
Priority: optional
http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/cortexa15hf-neon-vfpv4/enigma2-plugin-systemplugins-hrtunerproxy_4.0-8-gcc10ff9-r0_cortexa15hf-neon-vfpv4.ipk
Strange how it's just my 2 Mutant HD 51's that have the missing plugins. VU+ duo2 is ok. All boxes have the latest 5.1.020 image.
not read all the posts, but would a fresh flash sort it?
Fresh flashed with no restore and no plugin restore. Still the same. Sent Abu a debug log. Just waiting for a response.
abu baniaz
20-03-18, 21:35
I couldn't see anything in the log.
Something that is a possibility, is that it is not recognising some of the items.
Can you backup all the files in /etc/opkg and upload as a zip file please?
Strange how it's just my 2 Mutant HD 51's that have the missing plugins. VU+ duo2 is ok. All boxes have the latest 5.1.020 image.I can't check because I don't have the receiver, but the feeds look good.
Stef is going to run some other tests on an HD51 this week so hopefully he can check this too.
abu baniaz
20-03-18, 21:41
If you download the ipk using link in post 31, does it install? Please use command line to install it.
One way, although you could do it by wget...
Download to PC, transfer to /tmp on box
opkg istall /tmp/*.ipk
I couldn't see anything in the log.
Something that is a possibility, is that it is not recognising some of the items.
Can you backup all the files in /etc/opkg and upload as a zip file please?
56410 /etc/opkg zipped
If you download the ipk using link in post 31, does it install? Please use command line to install it.
One way, although you could do it by wget...
Download to PC, transfer to /tmp on box
opkg istall /tmp/*.ipk
Yes. It installed.
abu baniaz
20-03-18, 22:27
That is weird. They are all essentially empty.
Can you do an and then post the output
opkg update && opkg upgrade
Please restart and then check if any plugins are available to install. Also check if they are still 1 kb in size.
I saw a commit mentioning architecture, not sure if that is at play.
root@mutant51:~# opkg update && opkg upgrade
opkg update && opkg upgrade
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/3rdparty/Packages.gz.
Updated source 'openvix-3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/all/Packages.gz.
Updated source 'openvix-all'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'openvix-cortexa15hf-neon-vfpv4'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51/Packages.gz.
Updated source 'openvix-hd51'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/hd51_3rdparty/Packages.gz.
Updated source 'openvix-hd51_3rdparty'.
Downloading http://www.openvix.co.uk/feeds/openvix/release/5.1/hd51/mutant51/Packages.gz.
Updated source 'openvix-mutant51'.
That is weird. They are all essentially empty.
Can you do an and then post the output
opkg update && opkg upgrade
Please restart and then check if any plugins are available to install. Also check if they are still 1 kb in
I saw a commit mentioning architecture, not sure if that is at play.
Plugins still missing. Files still at 1kb.
abu baniaz
20-03-18, 23:34
After you flashed the box, did yoy say no to setting up the network?
abu baniaz
20-03-18, 23:48
Oops, sould have been this location.
/var/lib/opkg/lists
Sorry.
Oops, sould have been this location.
/var/lib/opkg/lists
Sorry.
56416 zipped files from /var/lib/opkg/lists
abu baniaz
22-03-18, 23:27
Can you try the following please?
Unzip file, transfer to /var/lib/opkg/lists restart and check again please
No Joy. Plugins still missing.
abu baniaz
23-03-18, 14:02
Sorry, I'm out of ideas.
All I can think of is if there is a check somewhere for ARM architectures?
have you tried going into GitHub and downloading from there and then transfer to receiver.
https://github.com/OpenViX/HRTunerProxy
Thanks John.
I’ve now installed HRtunerproxy and Oscam latest manually.
We are just trying to work out why The Mutant HD51 has a number of plugins missing.
Sorry, I'm out of ideas.
Thanks for trying to help Abu. I’m sure it will eventually be solved with someone having a lightbulb moment.
:confused:
I can't check because I don't have the receiver, but the feeds look good.
Stef is going to run some other tests on an HD51 this week so hopefully he can check this too.
Thanks Huevos. Let us know if we find out what the issue is.
abu baniaz
23-03-18, 19:40
Can you run the plugin script to list what is installed please? It is in this thread
http://www.world-of-satellite.com/showthread.php?57193-Manually-restore-settings-from-images-older-than-4-2
It is possible that you have already installed the items, that is why they do not show in the add section
root@mutant51:/tmp# python pluginslist.py
python pluginslist.py
plugin enigma2-plugin-softcams-oscam.emu-11392
plugin enigma2-plugin-picons-snp-full.800x450-760x410.light.on.transparent
plugin enigma2-plugin-extensions-dreamexplorer
plugin enigma2-plugin-extensions-iptvplayer
plugin enigma2-plugin-skins-openvix-vixbmc-1080-confluence
plugin enigma2-plugin-systemplugins-hrtunerproxy
plugin run-postinsts
Task completed. Output saved in /tmp/ExtraInstalledPlugins_2018-03-23_19-12-44.zip.
root@mutant51:/tmp#
I will do a fresh refresh without any restores and then put the file in from post 46.
Note. I have 3 plugin menu's that are missing compared to my VU+ duo2.
Display
Security
Softcams.
Also the HrtunerProxy Plugin missing from system plugin menu.
abu baniaz
23-03-18, 20:59
Where is the output file? Please attach it. Sorry, should have said
I also previously asked if you allowed the receiver to check IP address, thus update package. Not sure if you saw this.
Where is the output file? Please attach it. Sorry, should have said
I also previously asked if you allowed the receiver to check IP address, thus update package. Not sure if you saw this.
Can't see any mention of ip address check. Sorry not sure what you mean by this.
abu baniaz
23-03-18, 21:32
After you flash your image, there are two network screens in the First Install Wizard (FIW). If you say no to one of them, it disables updating the package files. Read what it says instead of being in auto pilot.
Do not install any plugins to begin with.
abu baniaz
23-03-18, 21:36
I will do a fresh refresh without any restores and then put the file in from post 46.
Note. I have 3 plugin menu's that are missing compared to my VU+ duo2.
Display
Security
Softcams.
Also the HrtunerProxy Plugin missing from system plugin menu.
HRtuner is installed already. (perhaps you did it manually. nonetheless, it wont show installed plugins)
Does your receiver have a front display panel? If it does not, it won't show the display category
Auto Pilot off.
Fresh flash done. Have said yes to network screens. It told me packages have been updated. No plugins installed.
Plugins still missing.
56446
Whats the next step please?
Sorry. Have to go out now. Will pick up tomorrow. Thanks
abu baniaz
23-03-18, 22:38
I should be getting mutant hd51 next week. I 'll debug the issue.
For now, install by command line.
I've just trashed the HD51 feeds, re-uploading fresh.
When status is green on openvix site: http://www.openvix.co.uk/
Try again please.
Fresh HD51 feeds online, please check. You'll need to remove HRTuner if you have it installed.
No softcam section on my HD51 or HRTuner in extensions. I don't use either so not a problem for me, posting for information only.
Plugins still missing. Softcam menu missing. HrTunerProxy missing.
Plugins still missing. Softcam menu missing. HrTunerProxy missing.
Did you fresh flash with no restore?
Fresh flash done with 5.1.022. No restore. No plugins downloaded. Missing Plugins still not there.
Bingo
I was going through my Asus Router network security to see what was trying to come through.
On checking my malicious site blocking I picked up that it was blocking openvix website at the times corresponding with my reflashing when trying to resolve my issue.
For some reason Trend Micro database is picking up that it is a malicious website with the name Mutant.
Anyway I turned it off and reflashed and hey presto the plugins were there.
To double check I reflashed my second Mutant with network security enabled and the plugins were not there.
I turned the security off and reflashed and the plugins were there.
Hope this might help anyone else having this issue.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.