stop funktion

[aage]

Stop funktionSTB VU+Duo2 new.
Image open Vix 5.1.019
No network.
Flashing new image
USB flashing,flashing ok.
Set up with wizard
Language english.
Tuner A simple DVB S2 0.8 west thor.
TunerB not connected.
Tuner C combi DVB C-T2
DVB T2 configured denmark.
Start automatic scan.
DVB S2 975 channels found,DVB T2 23 channels found.
OK gren key.
Now the TV display change to the VIX start up image with the text please wait?
I wait for one hour,then treid to set the STB in standby,no reaktion,
then power off.
Made new flashing with same result VIX start up image please wait.
VFD display blank.

Somebody have a explanation?

Sorry to tell.
Made a USB flashing with image Open Pli version 6.1-20180305.
Then the whole set up with all funktions is ok.
Regards Aage

[cactikid]

if flashing openvix image and have scanned for channels and the exit out instead of green maybe?
might there be a setting you switch vfn or off which is not available on pli?

i forgot to ask was box powered off and usb removed when flashing was finished.

[aage]

I have made some trials.
Only scanning tuner A 0.8 vest Thor.
When scanning is completed any of the the keys green-ok-exit can be used,
at this point this keys are equal.
In one of the trials a message occur in ca.2 sec.
Error you have to restart the reciver.
No funktions from the RCU keys.
Power off and then power on with the recivers front buttom
Now a window with error message from the CAM occur.
I succeed to get in the menu and change the error message from
the CAM module to no.( message yes block from other commands.)
Now the reciver set up is ok.
When flasing and set up the reciver I have a Cam module and card in CI slot one.

Best regards.

[aage]

if flashing openvix image and have scanned for channels and the exit out instead of green maybe?
might there be a setting you switch vfn or off which is not available on pli?

i forgot to ask was box powered off and usb removed when flashing was finished.

I have made some trials.
Only scanning tuner A 0.8 vest Thor.
When scanning is completed any of the the keys green-ok-exit can be used,
at this point this keys are equal.
In one of the trials a message occur in ca.2 sec.
Error you have to restart the reciver.
No funktions from the RCU keys.
Power off and then power on with the recivers front buttom
Now a window with error message from the CAM occur.
I succeed to get in the menu and change the error message from
the CAM module to no.( message yes block from other commands.)
Now the reciver set up is ok.
When flasing and set up the reciver I have a Cam module and card in CI slot one.

Best regards.

[aage]

if flashing openvix image and have scanned for channels and the exit out instead of green maybe?
might there be a setting you switch vfn or off which is not available on pli?

i forgot to ask was box powered off and usb removed when flashing was finished.

I have made some trials.
Only scanning tuner A 0.8 vest Thor.
When scanning is completed any of the the keys green-ok-exit can be used,
at this point this keys are equal.
In one of the trials a message occur in ca.2 sec.
Error you have to restart the reciver.
No funktions from the RCU keys.
Power off and then power on with the recivers front buttom
Now a window with error message from the CAM occur.
I succeed to get in the menu and change the error message from
the CAM module to no.( message yes block from other commands.)
Now the reciver set up is ok.
When flasing and set up the reciver I have a Cam module and card in CI slot one.

Best regards.