PDA

View Full Version : HDMI no signal - need to reboot


Dan123
26-02-18, 11:01
Hi all

I set up the F1 and all is good ...until you put it in standby mode over night.

When I turn on the F1 the next day, there is no HDMI o/p signal to the TV.
Once I reboot the F1, the HDMI signal is ok.

The F1 is put in standby mode many times during the day and there is no issue , its just when its left over night, and I go to switch it on the next day that issue occurs.

Any ideas on what's going on ?

Thanks
Sicilian
26-02-18, 11:56
Sounds like a hdmi handshake issue with your tv.


Sent from my iPhone using Tapatalk
Dan123
27-02-18, 08:23
Hi all

I set up the F1 and all is good ...until you put it in standby mode over night.

When I turn on the F1 the next day, there is no HDMI o/p signal to the TV.
Once I reboot the F1, the HDMI signal is ok.

The F1 is put in standby mode many times during the day and there is no issue , its just when its left over night, and I go to switch it on the next day that issue occurs.

Any ideas on what's going on ?
running
Thanks

CEC is disabled and the issue still happens when left over night. If CEC is turned off there should be no handshaking with the TV ?
Could it be a script that is running over night ? {eg EPG script etc)

Has anybody had this issue ? Any solution would be much appreciated !
Andy_Hazza
27-02-18, 08:49
Going directly to your tv or via an Amp?


Sent from my iPhone using Tapatalk
Dan123
27-02-18, 10:24
Going directly to your tv or via an Amp?


Sent from my iPhone using Tapatalk

Its direct to the TV
Dan123
01-03-18, 09:43
Hi all

I set up the F1 and all is good ...until you put it in standby mode over night.

When I turn on the F1 the next day, there is no HDMI o/p signal to the TV.
Once I reboot the F1, the HDMI signal is ok.

The F1 is put in standby mode many times during the day and there is no issue , its just when its left over night, and I go to switch it on the next day that issue occurs.

Any ideas on what's going on ?

Thanks

I re-flashed this and .... the same problem exits.
Looks like there is a problem with the F1. It is not practical to have to reboot the unit every day before you can turn it on.

looks like I will have to return it unless anybody has any suggestions ?

Thanks
cactikid
01-03-18, 21:40
have you tried another hdmi cable and port on tv when both are powered off to see if it works?
Dan123
02-03-18, 13:24
I turned off EPG updates & Auto Bouquet Maker ......and the problem doesn't happen !
The latest version of OpenVix is running

Now to find a solution as to why the above scheduled scripts are locking up the F1 and disabling the HDMI signal.
Is this a known bug ?

The F1 is not much good to me if it has no EPG !
cactikid
02-03-18, 14:11
please mention what device and where is your epg going like external passport or externally powered hdd.
Sicilian
03-03-18, 08:38
I turned off EPG updates & Auto Bouquet Maker ......and the problem doesn't happen !
The latest version of OpenVix is running

Now to find a solution as to why the above scheduled scripts are locking up the F1 and disabling the HDMI signal.
Is this a known bug ?

The F1 is not much good to me if it has no EPG !

What EPG are you using and where are you storing EPG?
Dan123
03-03-18, 22:01
What EPG are you using and where are you storing EPG?

I was using CrossEPG , however it did not run at the scheduled time , so I had to do manual downloads. I
have now disabled CrossEPG and I am now trying EPG-Importer.
The EPG is being saved to a SD Card.

I noticed today that the HDMI signal shut off randomly which would suggest it is not related to EPG - this needed a reboot.