TV stream stops when recording is starting.. (SID not found in PID)

[Danielorum]

Hello all.

This problem has been bugging me for a while. And after i updated to the newest VIX version, i cant watch TV and record at the same time.

I get this message when a recording is starting and i am watching, another channel:

"Channel not found - SID not found in PID".

I have a Technomate OE twin box + USB tuner (Mystique satix) so 3 tuners. Somewhere in VIX settings i put default recording tuner to tuner A and vieving tuner to tuner B. But that didnt' help either.

That on earth is going on? I suspect that my tuner settings are wrong. I really hope, its because i am too unknowing to figure it out. Thanks guys/gals

EDIT: Just saw that tuner 3 was set to default. It should be set to "Same as tuner A" i guess. But that dosen't explain my problem i think...

Daniel

https://imagizer.imageshack.com/v2/xq90/922/bytoRV.jpg (https://imageshack.com/i/pmbytoRVj)


https://imagizer.imageshack.com/v2/xq90/922/c3jEs1.jpg (https://imageshack.com/i/pmc3jEs1j)


https://imagizer.imageshack.com/v2/xq90/924/iIdjMe.jpg (https://imageshack.com/i/poiIdjMej)


https://imagizer.imageshack.com/v2/xq90/922/zLC79K.jpg (https://imageshack.com/i/pmzLC79Kj)


https://imagizer.imageshack.com/v2/xq90/924/YNUb4x.jpg (https://imageshack.com/i/poYNUb4xj)

[twol]

Its Unicable so you cannot use the same scr for all 3.
You have
Frequenz für Unicable-Receiver 1: 1210 MHz
• Frequenz für Unicable-Receiver 2: 1420 MHz
• Frequenz für Unicable-Receiver 3: 1680 MHz
• Frequenz für Unicable-Receiver 4: 2040 MHz

and A and B are set to scr 2, so change A to scr 1 and B to SCR 2 .....the dvbsky needs to be set to scr 3 or 4

[Danielorum]

Thank you so much for your reply. I changed the CR 1, 2, 3 accordingly. Now when I test the signal strength for each tuner, the signal bar keeps displaying the signal. Before the change, the signal bar would disappear after one second.

However I still cannot record. When I start a recording, and go to that channel, the screen is just black. The only channel I can view is the channel I was on, before I started a recoding on another channel... pretty confused right now :)

[twol]

Probably depends on how you have this wired up?
Can you add a description.
I would also disable the usb tuner and just try with the 2 dbv-s2 tuners.
Also don‘t know what skin you are using, but does it show which tuners are in use??

[Danielorum]

Yes my skin is showing which tuner is active at the moment. I will disconnect the USB tuner, just in case.

I have my system wired as such:

LNB (Onecable output) -> 10 splitter (with power-through) -> 4 splitter (with power through) -> a cable to each of my tuners, in my tv box. What do you make of this?

[twol]

A lot of splitters:)
Try just with the 2 receivers tuners and watch/record set to auto - not specific tuners.

[Danielorum]

Yeah I know! :)

Cool.will try that when I get home! Will keep you updated.

[Danielorum]

Right. I have tested it out and still there is black screen on the channel i'm recording. I unplugged the USB tuner and set recording tuner and playback, to default in the settings.

When i goto the channel which is recording, only the tuner "B" letter is showing, and its white. When i click on any other channel, i can see tv, and I will see the tuner letters A and B showing, and A is white, and B is red. ????

[Danielorum]

But if I am recording the channel I am watching, then there isn't a problem. The problem seems to occur when I record on a different channel than the one I'm currently watching...

[twol]

Have to say defeats me even with 2 tuners - you should be able to record 2 and watch one of them without issues
Maybe turn on debug logs and post them here . Menu/Setup/system/Logs/settings

[Huevos]

By the sound of it the most likely cause is a dodgy cable supplying one of the tuners.

[Danielorum]

twol:

I will try and create a logfile and post the output here.

Huevos:

I will try and replace the two cables going to the tuner, and see it that fixes the isssue.

[lnoton]

Did this ever get fixed? Be good to show resolution in case others suffer the same issue.

[Danielorum]

Yes you are right.. I should have replied sooner, because that's the least I can do when people have been so unselfish and helped me out.

I'm almost certain that my problem got resolved when I enabled the debug logging...strange that this made it work. But let me check that it's still th case and I'll report back.

[Danielorum]

Yes just doubled checked. After i ahd enabled Debug Logging, i was able to record with both my tuners. If this solved the problem or a delay on some of the other stuff i did, in the previous posts on this thread, i dunno...

[Andy_Hazza]

Enabling debug logs did not resolve this issue. You must have done something else.


Sent from my iPhone using Tapatalk

[Danielorum]

Yes i know it sounds crazy.. But i did all of the above, so i guess it did the trick..