SF4008 software download 009 FIXED?

[john doe]

just checked online update and seen below. can someone confirm if the driver is updated and do I need to flash with usb

08/01/2018 14:49 Captain
(SF4008) update update.bin
fix flash issue

[ccs]

It won't be in 009, which was released 9 days ago.

[twol]

In fact Dev is running at 011, so don‘t expect the update.bin included until at least release 11 or 11+ ... and I haven‘t seen what it may fix.... or not:)

[ccs]

just checked online update and seen below. can someone confirm if the driver is updated and do I need to flash with usb

08/01/2018 14:49 Captain
(SF4008) update update.bin
fix flash issue
I've never used software update, but had a quick look and was surprised to see the SF4008 update mentioned.

Should this have been shown in the list of available updates??

[twol]

I've never used software update, but had a quick look and was surprised to see the SF4008 update mentioned.

Should this have been shown in the list of available updates??

Good question :) I guess its showing whats in the OEA updates log but this has not been built into any OpenViX release so far .

[mrxbox360]

In fact Dev is running at 011, so don‘t expect the update.bin included until at least release 11 or 11+ ... and I haven‘t seen what it may fix.... or not:)

Hi twol would you advise people with sf4008 & running 4k resolution not to update until further notice of new drivers being tested & working ?

[twol]

Hi twol would you advise people with sf4008 & running 4k resolution not to update until further notice of new drivers being tested & working ?

I no longer have this receiver, but if it was me I would wait to see a few tests e.g. it will have been in last nights OpenATV nightly builds, so hopefully by the next image release from OpenViX we will have an idea of any other issues - of late Octagon haven't had a great track record :)

[mrxbox360]

I no longer have this receiver, but if it was me I would wait to see a few tests e.g. it will have been in last nights OpenATV nightly builds, so hopefully by the next image release from OpenViX we will have an idea of any other issues - of late Octagon haven't had a great track record :)

i was thinking the same as you with the updates & im toying with the idea of selling the octagon & getting another 4k box maybe another hd51 as these to have less issues.

[twol]

i was thinking the same as you with the updates & im toying with the idea of selling the octagon & getting another 4k box maybe another hd51 as these to have less issues.

Never had an issue with the HD51. Without a great deal of spin, Mut@nt have done what they said, Kodi, S2x tuner (proper blindscan coming with an update), built in multiboot, Stalker (IPTV), HbbTV, driver updates OK.

[twol]

Just looked at a thread on another forum and seen issues where they have not clean (usb) flashed - so usb clean flash and also they say no settings restore (I think to ensure they don't mess up the pip setting)

[Tunder]

Never had an issue with the HD51. Without a great deal of spin, Mut@nt have done what they said, Kodi, S2x tuner (proper blindscan coming with an update), built in multiboot, Stalker (IPTV), HbbTV, driver updates OK.

Hello twol
Does the HD51 supports 16 and 32 PSK MODULATION.
Please let me know.
Regards.
Tunder

[twol]

Hello twol
Does the HD51 supports 16 and 32 PSK MODULATION.
Please let me know.
Regards.
Tunder
Give me a service on 28.2 or 19.2 and I will tell you:)

[ccs]

Another SF4008 driver update just out - 12/01/2018.


remove temporary kodi support, fix fix start issue and audio issue 2160p
Important, User must flash image new !

(It won't be in 5.1.011)

[twol]

Also they are promising another update next week to bring Kodi back (this removes Kodi), so patience is required:)

As per @ccs
remove temporary kodi support
- Fixes audio issues on 2160P/60Hz on certain TVs
- Fixes no booting on HDR mode
- Fixes update.bin issue

--> Important, User must flash image new !

[ccs]

Another SF4008 driver update just out - 12/01/2018.
(It won't be in 5.1.011)

This driver update has been included in 5.1.011.....



Do not online update if you are currently on OpenViX image build 5.1.009 or below.
OpenViX 5.1.011 for Octagon SF4008 requires a new USB flash and setup.
Download from www.openvix.co.uk, USB flash and new setup.

[mrxbox360]

Ive just done mine from v5.1.007 to v5.1.011 by usb & with a restore from my settings v.1.007 & it has worked perfect & my box is set to 4k mode with no pip :thumbsup::cool: