View Full Version : [OS-mega] 0KB Recording
Setup timer recording and had 0kb file, so it didn't record.
attached is a screen grab and logs of event, any help will be very much appreciated
55457
55458
no mention of any recording devices be it usb or hdd setup on box to record or where recording is going?
It's an internal HDD
Sent from my SM-N910F using Tapatalk
ok internal hdd so its mounted and showing where recording is going to
do you have an epg to show your tv guide and tried another timer recording
i have never used zap just recording timers for all stuff.
It is impossible for anyone to give you a helpful answer as you have supplied no details of how the receiver is configured.
It is impossible for anyone to give you a helpful answer as you have supplied no details of how the receiver is configured.
Receiver is Edision OS Mega with 500GB internal HDD, timer is set to record to HDD/Movies.
Twin DVB-S2 tuner configured for Astra 28.2e
1 x DVB-C tuner configured for virgin media UK
Please if you could be more specific with any configuration, i will post the screenshots.
cheers
ok internal hdd so its mounted and showing where recording is going to
do you have an epg to show your tv guide and tried another timer recording
i have never used zap just recording timers for all stuff.
My Internal HDD is mounted properly and the EPG populated ok, i set the recording from the EPG hence why i used Zap and Record
Does this happen regularly, or is this a one off?
If the former, I'd try record rather than zap and record, and see how it goes.
does it matter if its sat or cable or both that have issue?
It started after I update my receivers to 5.1.002. I have both Edision mini+ and OS MEGA.
This happens on both, I normally use DVB-C tuner for recording
Sent from my SM-N910F using Tapatalk
in the timer list the programme started at 21:05
but in your log it shows as starting over an hour later.
are all the time settings right on your receiver?
i myself would reflash and setup boxes from scratch just in case people might have other files corrupting things from restore
in the timer list the programme started at 21:05
but in your log it shows as starting over an hour later.
are all the time settings right on your receiver?The time on both receiver's are set to sync with transponder time and it's on correct time zone
Sent from my SM-N910F using Tapatalk
in the timer list the programme started at 21:05
but in your log it shows as starting over an hour later.
are all the time settings right on your receiver?
... and recorded for 7 minutes, before stopping at the correct endtime.
Have you got recordings always have priority set to yes?
Are you using timeshift?
... and recorded for 7 minutes, before stopping at the correct endtime.
Have you got recordings always have priority set to yes?
Are you using timeshift?Yes I do use timeshift, it's set to start 5 seconds after switching to a channel.
Recording always have priority is set to YES
Sent from my Moto G (4) using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.