PDA

View Full Version : Not picking up USB sticks


Worzel
26-11-17, 18:51
I have a 16 GB USB stick to flash my duo 2 but on reboot it wont pick it up on any of the USB slots.
I have used this USB stick previously on an image flash.
My friend flashed his Solo SE yesterday with no problems so I used his USB stick and the Duo 2 in all USB ports and still no flash.

Any ideas guys?
abu baniaz
26-11-17, 18:59
Use image manager to download and then FLASH the image.

Link to guide with videos in my signature
Worzel
26-11-17, 20:13
Use image manager to download and then FLASH the image.

Link to guide with videos in my signature

All done, never flashed that way before, it was easy. Thanks for your help Abu :thumbsup:
cactikid
26-11-17, 21:58
16 gb is a bit high as i only use 8gb,glad your sorted
divil_a_bit
27-11-17, 11:50
I was having the same problem. Then I realised I was using one of the USB ports of my E2 receiver as the power source for my RaspberryPi. Once I plugged out the RaspberryPi, my USB stick was fine.

Moral of the story - when flashing with a USB stick, make sure there is nothing else plugged into any other USB port of your E2 receiver