View Full Version : cccam problem
hi all, just got my tm800 and flashed no problem, ive inputted my cccam config but dont seem to be working, i have a tm600 and that works fine. i understand that the donfig goes into etc, cccam is not clearing any channels, please helpppp
Have you installed cccam mate?
yes, the image has cccam 2.2.1 installed, i copied over my config, but no joy. i dont understand where im going wrong?
silverfox0786
22-01-11, 00:39
recheck the actual config file and make sure its correct
and that cccam is actually started
does it not go into var/etc in your TM 800 box..... ??
i have put my config into etc and not var/etc. i have downloaded cccam info and it shows my config file but all clients and servers are off line. plug my tm600 in and thats working no problem, so it cant be my internet connection, puzzled !!!!!!!!!!!
your CCcam.cfg file goes into /etc
is your TM800 connecting to the external internet? press the LAN button, and at the bottom of the screen, where it says link, it should have a green dot, wait for it to say connected above it, and see if your external IP appears in the panel on the left, takes ~ 20 seconds
this will ensure that you are actually connected to the net
your CCcam.cfg file goes into /etc
is your TM800 connecting to the external internet? press the LAN button, and at the bottom of the screen, where it says link, it should have a green dot, wait for it to say connected above it, and see if your external IP appears in the panel on the left, takes ~ 20 seconds
this will ensure that you are actually connected to the net
hi, the link dot does go green but i don't see my external IP
restart the network wizard, ensure DHCP is enabled
your receiver knows its connected to 'something' but it cannot connect outside of your router
all sorted. it was a router problem not a cccam problem, thanks for your help.
Excellent, glad your sorted :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.