PDA

View Full Version : "sid not found in pat" but OpenWebif still works



olivogt
17-09-17, 18:01
Hi - since a few days I see the following error when using my TV: "sid not found in pat" (+ some picture of the Alps) - Connecting to the box via http and OpenWebif still works fine...

Any suggestions please?


Brand: Technomate
Model: tmtwinoe
Chipset: 7335
Frontprocessor Version: 0
Total Memory: 136756 kB
Free Memory: 64916 kB
Box Uptime: 16d 23:40
Software
Kernel version: 3.9.7
Firmware version: 22-09-2015 16:20:58
Gui version: 24-08-2015
Tuners
Tuner A: BCM7335 (internal) (DVB-S2)
Tuner B: BCM7335 (internal) (DVB-S2)

Thanks,
Oliver

Huevos
18-09-17, 16:17
There is insufficient information in this post to help you. If are not using the latest image please update and then post a grab of the information screen.

olivogt
21-09-17, 15:18
Thanks - the new image is installed and the error message is gone. However... The original settings are also gone..

I have a diseqc switch and 2xLNBs: one for the English and one for the German Satellite - Astra 19.2 & 28.2
Unfortunately I cannot figure out how to config the German channels...

In hindsight, I should have used the Satellite for the German TV and use the digital TV for the English Channels.
The diseqc switch solution is not really necessary...

Could you may be point me in the direction on how to config a diseqc switch?

Thanks,
Oliver

olivogt
28-09-17, 09:35
Hi - I have just installed openATV and everything works fine.

O.