PDA

View Full Version : Xtrend Et10k- 2nd Network Disappear


bumperbee
16-08-17, 21:41
Hi Everyone, I have a Et10k xTrend with image “openvix-5.0.025.release-et10000_usb”. It has 2 lan input and was setup during a new flashing. After setting up all the necessary setup in menu, I found the 2nd lan network just disappear and could not do any reinstall. So got no other choice but to reflash the image again and successfully installed the 2 lan network. Very disappointedly, it disappear again. Please tell me how to reinstall it? Thanks very much
twol
17-08-17, 05:53
Why do you need 2 networks?
As far as I remember of my ET10000, you can configure and use only one LAN connection at a time ...
bumperbee
17-08-17, 06:29
Hi Twol, thanks for the quick reply.
Since it come with 2 lan input, I feel it should right to make both works. Furthermore, I had bought a switch to serve this.
Andy_Hazza
17-08-17, 07:06
@Twol is right. When I had my E10K, I could only use one LAN.


Sent from my iPhone using Tapatalk
twol
17-08-17, 08:37
I actually used to have LAN cables into both ports otherwise when I couch flashed without a settings restore and went through the startup wizard, I would get issues with the network not connecting ... but thats quite some time ago:)
cactikid
17-08-17, 21:09
agreed it is put in there to annoy us and you have to know which one is been fed by cable and then setup that port to enable a connection.
bumperbee
17-08-17, 21:53
Thanks very much Guys.
I wonder if there is any way to install the 2nd network again manually?
twol
17-08-17, 22:26
I don't think so :)
As much as I think that in general, Xtrend had some great products & ideas, this one was very much a "wouldn't it be great if ..." without thinking it through.
tappari
18-08-17, 08:32
I don't think so :)
As much as I think that in general, Xtrend had some great products & ideas, this one was very much a "wouldn't it be great if ..." without thinking it through.

Goes also to recording from HDMI input. :p
bumperbee
18-08-17, 09:53
Hi Guys, thanks very much for the infos
twol
18-08-17, 10:29
Goes also to recording from HDMI input. :p

Very true! There are other receivers with hdmi in, but don't record!
tappari
18-08-17, 11:05
Very true! There are other receivers with hdmi in, but don't record!

VU+ Ultimo 4K does, but only with VTi image. Not with ViX.
ccs
18-08-17, 12:21
Very true! There are other receivers with hdmi in, but don't record!
It records ok on my ET10k, although I only went thru' the exercise of getting it working, I've never actually needed to use it.
tappari
18-08-17, 13:34
It records ok on my ET10k, although I only went thru' the exercise of getting it working, I've never actually needed to use it.

I think with timer function it works. But Ultimo 4K works ok without timer if you use VTi image.
bumperbee
26-08-17, 23:33
Hi Guys, very sorry for the late reply. Didn’t receive any notification on any reply.
Thanks very much for the info!
Best Wishes to All!