PDA

View Full Version : Recording problem


knislinge2000
31-07-17, 10:29
Hi.
I have a problem with recording with my VU + Duo does not want to change satellite.
If I programmed recording on Thor 0.8W and my box is set to a channel of 13.0E then nothing will be recorded at all.
Hope someone can help me with this thanks.
I am using a V-box2 (36V) to change satellite

I use Open Wix 5 0 023 and i set recording from EPG
The strange thing is that the dish moves quite well when I choose channels from all other menus

Tested now with my VU + Solo2 and it worked just like I wanted the dish moved to the right satellite and started recording.
Have the same image on it so no difference
:mad:
timofee
31-07-17, 13:34
There is no reason why it should not move the dish and then record the channel.

Have you tested a few things. Is the channel you want to record working if you select it.

Have you tried moving your dish in advance to 1°w then setting up a timer of the channel you want to record. Just do a test - set a timing for say the next five minutes and see what happens.
knislinge2000
31-07-17, 14:38
There is no reason why it should not move the dish and then record the channel.
Have you tested a few things. Is the channel you want to record working if you select it.
Have you tried moving your dish in advance to 1°w then setting up a timer of the channel you want to record. Just do a test - set a timing for say the next five minutes and see what happens.


I have tested putting the timer with EPG at 1 ° w then moved the dish to 13 ° E and waited a while when it's time for recording the VFD
flash "recording" but the dish does not move.
bellejt
31-07-17, 14:42
if you are watching a channel on one other sat it is normal the dish does not move if you do not give priotity to recordings.
knislinge2000
31-07-17, 15:09
if you are watching a channel on one other sat it is normal the dish does not move if you do not give priotity to recordings.

But my solo2 move the dish if i am on an other satellit .
How do i give priotity to recordings?
Something i missed?
bellejt
31-07-17, 16:16
settings - recordings +++++ - priority recording
knislinge2000
31-07-17, 16:55
That setting was already done!
I tested going to openvix-4.2.030.release same as I have on my VU + Solo2
without success :(

Start getting sick and tired of Duo2
Think I sell it and keep my solo2 :mad::mad:
bellejt
31-07-17, 17:07
maybe take the time to compare settings for recording and tunersettings for recording between both boxes. If it works on solo2 it should be working on duo2 as well.Image is the same.
knislinge2000
31-07-17, 17:59
maybe take the time to compare settings for recording and tunersettings for recording between both boxes. If it works on solo2 it should be working on duo2 as well.Image is the same.

All settings are the same i soon get crazy:mad:
knislinge2000
31-07-17, 21:25
All settings are the same i soon get crazy:mad:

Help with this problem would be amazing:):)
Alankellyeire
01-08-17, 08:00
take a backup of the settings on the solo2 and transfer it and restore it on the Duo2
knislinge2000
01-08-17, 12:39
take a backup of the settings on the solo2 and transfer it and restore it on the Duo2


Do not really know how to do it.
Is it possible to have the same settings in duo + as in solo2
timofee
01-08-17, 13:45
What happens if the channel you are trying to record is on the same satellite as the channel currently being received by the Duo2.
knislinge2000
01-08-17, 19:13
Have tried to record a channel on the same satellite while I was on another channel on the same satellite and the receiver does NOT change channel
bellejt
02-08-17, 07:58
if you are recording why would the box change channel ? If you are watching and recording on same satelite and same transponder it should work fine.Differant transponders is a problem if you have only one cable attached.With rotor you can only record from one sat at the time.
knislinge2000
02-08-17, 11:50
It works with my solo2
:confused:
ronand
02-08-17, 12:15
By default on a twin tuner receiver the channel will not change if on the same satellite. If you use "zap & record" it will change channel.
knislinge2000
03-08-17, 14:07
YES YES YES :)

It was the dubbletuner that was faulty so when i removed that tuner and only use the single tuner all work fine :)
ronand
03-08-17, 17:10
Its unlikely to be the tuner - maybe the cable.
bellejt
03-08-17, 17:27
just wrong settings.Tuner will be fine.Probably dual tuner and rotor on 1 tuner exit,not on second exit.Glad you found the solution but best is to have a fixed disk and rotor on dual tuner.Possibilitys at random.