Usb Connected Hdd Could Not Mount

[bumperbee]

Hi Everyone, I had been trying to transfer files from a 3Tb internal Hdd in Et10k to a 5Tb external Hdd through Usb connection. I go to Blue Button>Vix>Mount Manager, it only show the 3Tb internal Hdd.
Please help
Thanks very much

[ccs]

What format is the 5Tb disc, and I assume it has its own power supply?

[bumperbee]

Hi CCS, thanks very much for your quick reply!
Yes, it has its own power supply and is in Ext4. I had no problem using it previously.
Best Regards

[birdman]

Can you plug anything else (spare USB stick?) into that USB socket to see whether it is seen (you don't have to format it, just check whether the hardware is available)?

[bumperbee]

Hi Birdman, it is working alright, only 2 days back I done a totally new installation of the image and without restoring any backup. I tried to mount the external hdd, still can’t. In fact, I also did tried on all other Usb terminals but still fail.

[birdman]

Hi Birdman, it is working alright, only 2 days back I done a totally new installation of the image and without restoring any backup. I tried to mount the external hdd, still can’t. In fact, I also did tried on all other Usb terminals but still fail.None of which actually checks what happens when you plug a USB stick in.
All you are reporting is a 5TB disk that can;t be seen - it could be that he 5TB disk is non-functional in some way.
Can you plug that 5TGB disk into a PC (or similar) and check whether it is seen by that?

[bumperbee]

I did a new complete flash with no restoration of the settings from the backup that was created with a Usb stick and is working fine. My Pc is in Windows Os which would not be able to detect it. But I had tried the 5Tb Hdd on other stb and is it detected and mounted. I use this Hdd once a while when my Stb’s internal Hdd when full, to backup all the timer recorded files.
Please help
Thanks very much

[birdman]

My Pc is in Windows Os which would not be able to detect it.It would. It wouldn't be able to mount the file-system, but that's a separate issue. It would show up in the device manager as a disk device (you might even be prompted to format it - not sure what MS Windows does in such cases).


But I had tried the 5Tb Hdd on other stb and is it detected and mounted.Have you done that since it failed to be seen by your box.
I'm trying to get some confirmation that it is working now - not just that it was working at some point in the past.

[bumperbee]

Thanks very much, Birdman. I try again

[bumperbee]

It's still not working. I also did tried on my other stb,it can detect and read all the files inside. Please help!

[birdman]

Could you copy off the file /var/log/dmesg.log or /var/log/messages (or boh) from the system (with the 5TB disk actually plugged in to the system) and post it here?

[bumperbee]

I am sorry for not able to attached the file, it seem your website does not allow me, so I will just append below the content in this file.
Thanks very much
22hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.102000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.102000] TCP reno registered
[ 0.103000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.104000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.105000] NET: Registered protocol family 1
[ 0.106000] RPC: Registered named UNIX socket transport module.
[ 0.107000] RPC: Registered udp transport module.
[ 0.107000] RPC: Registered tcp transport module.
[ 0.108000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.109000] PCI: CLS 0 bytes, default 64
[ 0.112000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.113000] fuse init (API version 7.17)
[ 0.114000] msgmni has been set to 620
[ 0.116000] io scheduler noop registered
[ 0.117000] io scheduler cfq registered (default)
[ 0.118000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.140000] serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
[ 0.141000] console [ttyS0] enabled, bootconsole disabled
[ 0.163000] serial8250.0: ttyS1 at MMIO 0x10400b80 (irq = 67) is a 16550A
[ 0.165000] loop: module loaded
[ 0.166000] sata_brcmstb 0000:01:00.0: version 4.0
[ 0.166000] brcm-pm: enabling sata clocks
[ 0.167000] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
[ 0.167000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 0.363000] scsi0 : sata_brcmstb
[ 0.364000] scsi1 : sata_brcmstb
[ 0.365000] ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
[ 0.366000] ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
[ 0.367000] Broadcom STB NAND controller (BrcmNand Controller)
[ 0.368000] bcmemac: Broadcom STB 10/100 EMAC driver v3.0
[ 0.372000] bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:09:34:2e:b0:f9)
[ 0.373000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.374000] brcm-pm: enabling usb clocks
[ 0.374000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.375000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.407000] ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
[ 0.413000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.414000] hub 1-0:1.0: USB hub found
[ 0.415000] hub 1-0:1.0: 2 ports detected
[ 0.415000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[ 0.416000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[ 0.448000] ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
[ 0.454000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[ 0.455000] hub 2-0:1.0: USB hub found
[ 0.456000] hub 2-0:1.0: 2 ports detected
[ 0.456000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.457000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.458000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
[ 0.459000] ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
[ 0.524000] hub 3-0:1.0: USB hub found
[ 0.525000] hub 3-0:1.0: 2 ports detected
[ 0.526000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[ 0.526000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
[ 0.527000] ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
[ 0.593000] hub 4-0:1.0: USB hub found
[ 0.594000] hub 4-0:1.0: 2 ports detected
[ 0.595000] Initializing USB Mass Storage driver...
[ 0.595000] usbcore: registered new interface driver usb-storage
[ 0.596000] USB Mass Storage support registered.
[ 0.597000] i2c /dev entries driver
[ 0.597000] ALSA device list:
[ 0.598000] No soundcards found.
[ 0.598000] TCP cubic registered
[ 0.599000] NET: Registered protocol family 17
[ 0.599000] Registering the dns_resolver key type
[ 0.600000] EBI CS1: setting up NAND flash (primary)
[ 0.601000] mtd->oobsize=0, mtd->eccOobSize=0
[ 0.602000] NAND_CS_NAND_XOR=00000000
[ 0.602000] B4: NandSelect=40000202, nandConfig=18152300, chipSelect=1
[ 0.603000] brcmnand_read_id: CS1: dev_id=ecd35195
[ 0.604000] After: NandSelect=40000202, nandConfig=18152300
[ 0.604000] Block size=00020000, erase shift=17
[ 0.605000] NAND Config: Reg=18152300, chipSize=1024 MB, blockSize=128K, erase_shift=11
[ 0.606000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
[ 0.607000] timing1 not adjusted: 5363444f
[ 0.607000] timing2 not adjusted: 00000fc6
[ 0.608000] eccLevel=15, 1Ksector=0, oob=16
[ 0.608000] nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
[ 0.609000] <--brcmnand_set_acccontrol: acc b4: f7ff1010, after: f7ff1010
[ 0.610000] BrcmNAND mfg ec d3 Samsung K9F8G08U0M 1024MB on CS1
[ 0.610000]
[ 0.610000] Found NAND on CS1: ACC=f7ff1010, cfg=18152300, flashId=ecd35195, tim1=5363444f, tim2=00000fc6
[ 0.612000] BrcmNAND version = 0x0302 1024MB @00000000
[ 0.612000] B4: NandSelect=40000202, nandConfig=18152300, chipSelect=1
[ 0.613000] brcmnand_read_id: CS1: dev_id=ecd35195
[ 0.614000] After: NandSelect=40000202, nandConfig=18152300
[ 0.614000] Found NAND flash on Chip Select 1, chipSize=1024MB, usable size=1024MB, base=0
[ 0.615000] brcmnand_scan: B4 nand_select = 40000202
[ 0.616000] brcmnand_scan: After nand_select = 40000202
[ 0.617000] page_shift=11, bbt_erase_shift=17, chip_shift=30, phys_erase_shift=17
[ 0.618000] Brcm NAND controller version = 3.2 NAND flash size 1024MB @00000000
[ 0.618000] ECC layout=brcmnand_oob_64
[ 0.619000] brcmnand_scan: mtd->oobsize=64
[ 0.619000] brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
[ 0.620000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
[ 0.621000] -->brcmnand_default_bbt
[ 0.622000] brcmnand_default_bbt: bbt_td = bbt_main_descr
[ 0.622000] Bad block table Bbt0 found at page 0007ffc0, version 0x01 for chip on CS1
[ 0.623000] Bad block table 1tbB found at page 0007ff80, version 0x01 for chip on CS1
[ 0.623000] nand_read_bbt: Bad block at 0x01860000
[ 0.623000] nand_read_bbt: Bad block at 0x16460000
[ 0.623000] nand_read_bbt: Bad block at 0x18e00000
[ 0.623000] nand_read_bbt: Bad block at 0x1f6a0000
[ 0.623000] nand_read_bbt: Bad block at 0x28220000
[ 0.624000] nand_read_bbt: Bad block at 0x38e60000
[ 0.624000] brcmnandCET: Did not find CET, recreating
[ 0.627000] brcmnandCET: Status -> Deferred
[ 0.628000] Adjust partition complete size from 40000000 to 3ff80000 to avoid overlap with BBT reserved space
[ 0.629000] Adjust partition root size from 3f800000 to 3f780000 to avoid overlap with BBT reserved space
[ 0.630000] Creating 4 MTD partitions on "brcmnand.0":
[ 0.631000] 0x000000000000-0x00003ff80000 : "complete"
[ 0.640000] 0x000000000000-0x000000100000 : "loader"
[ 0.642000] 0x000000100000-0x000000800000 : "boot"
[ 0.644000] 0x000000800000-0x00003ff80000 : "root"
[ 0.655000] UBI: attaching mtd3 to ubi0
[ 0.656000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 0.656000] UBI: logical eraseblock size: 126976 bytes
[ 0.657000] UBI: smallest flash I/O unit: 2048
[ 0.658000] UBI: VID header offset: 2048 (aligned 2048)
[ 0.658000] UBI: data offset: 4096
[ 0.981000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.985000] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX001A, max UDMA/100
[ 0.986000] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.993000] ata1.00: configured for UDMA/100
[ 0.994000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 AX00 PQ: 0 ANSI: 5
[ 0.996000] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.997000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.998000] sd 0:0:0:0: [sda] Write Protect is off
[ 0.999000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.999000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.005000] sda: sda1
[ 1.007000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.322000] ata2: SATA link down (SStatus 4 SControl 300)
[ 5.194000] UBI: max. sequence number: 1857
[ 5.227000] UBI: attached mtd3 to ubi0
[ 5.227000] UBI: MTD device name: "root"
[ 5.228000] UBI: MTD device size: 1015 MiB
[ 5.229000] UBI: number of good PEBs: 8118
[ 5.229000] UBI: number of bad PEBs: 6
[ 5.230000] UBI: number of corrupted PEBs: 0
[ 5.230000] UBI: max. allowed volumes: 128
[ 5.231000] UBI: wear-leveling threshold: 4096
[ 5.231000] UBI: number of internal volumes: 1
[ 5.232000] UBI: number of user volumes: 2
[ 5.232000] UBI: available PEBs: 0
[ 5.233000] UBI: total number of reserved PEBs: 8118
[ 5.234000] UBI: number of PEBs reserved for bad PEB handling: 81
[ 5.234000] UBI: max/mean erase counter: 2/1
[ 5.235000] UBI: image sequence number: 124760597
[ 5.238000] UBI: background thread "ubi_bgt0d" started, PID 47
[ 5.307000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 5.307000] UBIFS: file system size: 420163584 bytes (410316 KiB, 400 MiB, 3309 LEBs)
[ 5.308000] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
[ 5.309000] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 5.310000] UBIFS: default compressor: lzo
[ 5.310000] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 5.312000] VFS: Mounted root (ubifs filesystem) on device 0:13.
[ 5.315000] devtmpfs: mounted
[ 5.315000] Freeing unused kernel memory: 220k freed
[ 6.377000] UBIFS: parse nofail
[ 6.378000] UBIFS error (pid 65): ubifs_parse_options: unrecognized mount option "nofail" or missing value
[ 7.838000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.025000] stb_core: module license 'Proprietary' taints kernel.
[ 8.026000] Disabling lock debugging due to kernel taint
[ 9.824000] enter base init, xvd 20100413, vdc 20100413, rap 20100719, xpt 20110228
[ 10.292000] 10:292013285 SMCA: controller reset timed out
[ 10.302000] 10:302005460 SMCB: controller reset timed out
[ 10.920000] register adapter
[ 10.923000] register adapter
[ 10.935000] register adapter
[ 10.950000] register adapter
[ 10.966000] FP Version 6
[ 10.977000] input: dreambox front panel as /devices/virtual/input/input0
[ 10.988000] fpga init
[ 12.359000] done OK 0
[ 12.360000] using fpga version 47
[ 12.361000] tsmux set tsports reg 00 to val 00
[ 12.361000] tsmux set tsports reg 01 to val 01
[ 12.362000] tsmux set tsports reg 02 to val 02
[ 12.362000] tsmux set tsports reg 03 to val 03
[ 12.363000] tsmux set tsports reg 04 to val 04
[ 12.363000] tsmux set tsports reg 05 to val 05
[ 12.364000] tsmux set ciclk reg 34 to val 00
[ 12.364000] tsmux set cisource reg 06 to val 00
[ 12.365000] tsmux set ciclk reg 34 to val 00
[ 12.365000] tsmux set cisource reg 07 to val 01
[ 12.368000] set sb to 3(2)
[ 12.368000] set fb to 2(-1)
[ 12.369000] set input to 0
[ 12.369000] set fb to 2(-1)
[ 12.375000] bcm_video_analog_port_setup (fmt=7)
[ 12.376000] SET FORMAT: display[1], format=7
[ 12.377000] display 0 uses vbi path 1
[ 12.377000] display 1 uses vbi path 0
[ 12.379000] HDMI: ignore false positive disconnect!
[ 12.380000] HDMI: now powered down
[ 12.380000] HDMI: Unable to retrieve Rx EDID info.. no rx device
[ 12.381000] using 50.00Hz as MonitorRefreshRate
[ 12.382000] SET FORMAT: display[0], format=37
[ 12.383000] set fb to 2(0)
[ 12.383000] bcm_video_analog_port_setup (fmt=7)
[ 12.384000] SET FORMAT: display[1], format=7
[ 12.386000] keys c7
[ 12.425000] disable wss on display 0
[ 12.426000] disable wss on display 1
[ 12.427000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
[ 12.440000] HDMI: use logical CEC address 3
[ 12.515000] CEC send ok!
[ 12.566000] enable mad
[ 12.626000] VIDEO0: set fallback framerate to 60000
[ 12.626000] VIDEO0: set progressive override mode to 1
[ 12.627000] VIDEO0: set streamtype!
[ 12.627000] set MPEG2
[ 12.628000] sw rave disabled!
[ 12.630000] enable mad
[ 12.630000] VIDEO1: set fallback framerate to 60000
[ 12.631000] VIDEO1: set progressive override mode to 1
[ 12.632000] VIDEO1: set streamtype!
[ 12.632000] set MPEG2
[ 12.632000] sw rave disabled!
[ 12.636000] sync is off so we enable it
[ 12.637000] playback!
[ 12.637000] total video delay: 0 (0 ms)
[ 12.641000] VIDEO0: start decode
[ 12.641000] flush video decoder
[ 12.642000] VIDEO0 got pts failed !!!! (ret 0)
[ 13.989000] set ac3 to downmix
[ 13.990000] set ac3plus to use_hdmi_caps
[ 13.990000] set aac to downmix
[ 13.990000] init ALSA!
[ 14.025000] VIDEO0: first pts 0x0
[ 14.072000] DVB: registering new adapter (BCM7405)
[ 14.176000] enable tsm0
[ 14.242000] autodetecting NIMs...
[ 14.242000] slot 0
[ 14.248000] ret: 2, feid: 13
[ 14.248000] Found: Slot 0, ID: 13 (by CA)
[ 14.249000] slot 1
[ 14.250000] ret: 2, feid: 15
[ 14.251000] Found: Slot 1, ID: 15 (by CA)
[ 14.251000] Initializing adapter 0 (BCM4505-DVB-S2)
[ 14.333000] bcm4506: found 4505, revision 0(b0)
[ 14.334000] bcm4506: bcm_initAP
[ 14.340000] bcm4506: upload & start firmware
[ 16.507000] bcm4506: bcm4506: ap not running - start now
[ 16.558000] bcm4506: uCode 0x61
[ 16.575000] bcm4506: no bcm3445 detected
[ 16.588000] DVB: registering adapter 0 frontend 0 (bcm4506)...
[ 16.620000] Initializing adapter 2 (CXD1981-(null))
[ 16.632000] DVB: registering adapter 0 frontend 0 (CXD1981)...
[ 17.887000] VIDEO0: stop decode
[ 17.887000] no decoder left in sync handling so disable xpt_sync
[ 17.898000] CI stopped...
[ 17.908000] CI stopped...
[ 17.920000] registered vtuner misc/vtuner0, minor 54
[ 17.923000] registered vtuner misc/vtuner1, minor 53
[ 17.924000] IR-TX init!
[ 40.777000] input: dreambox remote control (native) as /devices/virtual/input/input1
[ 40.795000] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
[ 40.820000] input: dreambox ir keyboard as /devices/virtual/input/input3
[ 40.833000] input: dreambox ir mouse as /devices/virtual/input/input4
[ 41.213000] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
[ 41.324000] 4036291 ms:
[ 41.930000] 606 ms: 10
[ 41.983000] 53 ms: 12
[ 41.995000] VIDEO0: set blank to 0
[ 41.996000] sync is off so we enable it
[ 41.997000] playback!
[ 41.997000] total video delay: 0 (0 ms)
[ 42.001000] VIDEO0: start decode
[ 42.002000] flush video decoder
[ 42.065000] VIDEO0: first pts 0x0
[ 42.066000] VIDEO0: framerate changed 3
[ 42.066000] VIDEO0: resolution changed (1280 720)
[ 42.067000] VIDEO0: aspect changed 3
[ 42.082000] 98 ms: 13
[ 42.126000] set current avs auto aspect to 16:9
[ 42.127000] disable wss on display 0
[ 42.127000] disable wss on display 1
[ 42.128000] set current avs auto aspect to 16:9
[ 42.129000] disable wss on display 0
[ 42.130000] disable wss on display 1
[ 42.130000] set sb to 3(1)
[ 42.149000] 66 ms: 15
[ 42.167000] 18 ms: 17
[ 42.196000] 29 ms: 19
[ 42.280000] enable tsm0
[ 42.282000] VIDEO0: set blank to 0
[ 42.283000] VIDEO0: stop decode
[ 42.283000] VIDEO0: set blank to 0
[ 42.284000] no decoder left in sync handling so disable xpt_sync
[ 43.127000] 931 ms: 20

[birdman]

I am sorry for not able to attached the file, it seem your website does not allow me,You have to zip it.

Anyway, it shows that you system can't see the USB drive at all.
Which is why it would be helpful if you could put a USB stick into the USB slot on the running system and check that it is seen.

[bumperbee]

Hi Birdman, thanks for the info. Now I know it accept zip file.
I had also taken a photo (in device manager) showing both my Internal and Usb connected 5Tb Hdd (mounted) on my other Stb. I tried many ways to attach the photo by changing the format to png, jpg, zip but still failed to upload.
Please help

[Andy_Hazza]

Hi Birdman, thanks for the info. Now I know it accept zip file.
I had also taken a photo (in device manager) showing both my Internal and Usb connected 5Tb Hdd (mounted) on my other Stb. I tried many ways to attach the photo by changing the format to png, jpg, zip but still failed to upload.
Please help

You need to click on the Advanced tab to upload/attach pictures etc.


Sent from my iPhone using Tapatalk

[bumperbee]

Hi Andy, thanks very much for your quick reply.
Yes I did that and every time I try to attach the file, a red mark appear beside the file name and show fail to attach.
In fact I am doing it now still cannot attach any file.

[ccs]

Try attaching the file twice (ie 2 files selected) , the second one should work ok.

[birdman]

I tried many ways to attach the photo by changing the format to png, jpg, zip but still failed to upload.You add images using the square icon with a dot in each corner (to the right of the globe with a red cross on it) rather than uploading them.
Although you could always zip them and upload that....

Attaching a zip file needs Advanced mode, adding a picture doesn't. (Don't ask me why as I have no idea).

However, what I really need to see is what happens when you put a USB stick into the running ET10k.

[bumperbee]

I just tried adding the file twice, it didn’t work. Using the “add image” also didn’t work. I can only append below the content of dmesg by inserting a flashdrive.

[ 0.055000] Key type id_resolver registered
[ 0.055000] Key type id_legacy registered
[ 0.055000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.055000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.055000] fuse init (API version 7.26)
[ 0.061000] bounce: pool size: 64 pages
[ 0.061000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.061000] io scheduler noop registered
[ 0.061000] io scheduler cfq registered (default)
[ 0.061000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.062000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
[ 0.070000] loop: module loaded
[ 0.070000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[ 0.080000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.080000] ahci ahci.0: flags: ncq sntf stag clo slum part
[ 0.084000] scsi host0: ahci
[ 0.085000] scsi host1: ahci
[ 0.085000] ata1: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
[ 0.085000] ata2: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
[ 0.085000] brcmstb_nand: NAND controller driver is loaded
[ 0.086000] libphy: Fixed MDIO Bus: probed
[ 0.086000] __clk_enable: network [1]
[ 0.086000] bcm7425_pm_network_enable 00
[ 0.086000] __clk_enable: enet [1]
[ 0.086000] bcm40nm_pm_genet_enable 00
[ 0.198000] bcmgenet: configuring instance #0 for internal PHY
[ 0.220000] bcmgenet bcmgenet.0 eth0: link down
[ 0.220000] __clk_disable: enet [0]
[ 0.220000] bcm40nm_pm_genet_disable 00
[ 0.220000] __clk_disable: network [0]
[ 0.220000] bcm7425_pm_network_disable 00
[ 0.220000] __clk_enable: network [1]
[ 0.220000] bcm7425_pm_network_enable 00
[ 0.220000] __clk_enable: moca_genet [1]
[ 0.220000] bcm40nm_pm_genet1_enable 00
[ 0.220000] __clk_enable: moca [1]
[ 0.220000] bcm40nm_pm_moca_enable 00
[ 0.233000] Found PHY at Address 31
[ 0.233000] bcmgenet: configuring instance #1 for external RGMII
[ 0.233000] __clk_disable: moca [0]
[ 0.233000] bcm40nm_pm_moca_disable 00
[ 0.233000] __clk_disable: moca_genet [0]
[ 0.233000] bcm40nm_pm_genet1_disable 00
[ 0.233000] __clk_disable: network [0]
[ 0.233000] bcm7425_pm_network_disable 00
[ 0.233000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.233000] __clk_enable: usb [1]
[ 0.233000] bcm40nm_pm_usb_enable 00
[ 0.233000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.233000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.243000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[ 0.250000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.250000] hub 1-0:1.0: USB hub found
[ 0.250000] hub 1-0:1.0: 1 port detected
[ 0.250000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[ 0.250000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[ 0.261000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
[ 0.268000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[ 0.268000] hub 2-0:1.0: USB hub found
[ 0.268000] hub 2-0:1.0: 1 port detected
[ 0.268000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
[ 0.268000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
[ 0.279000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
[ 0.286000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
[ 0.286000] hub 3-0:1.0: USB hub found
[ 0.286000] hub 3-0:1.0: 1 port detected
[ 0.286000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
[ 0.286000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
[ 0.297000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
[ 0.304000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
[ 0.304000] hub 4-0:1.0: USB hub found
[ 0.304000] hub 4-0:1.0: 1 port detected
[ 0.304000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.304000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.305000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
[ 0.305000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
[ 0.371000] hub 5-0:1.0: USB hub found
[ 0.371000] hub 5-0:1.0: 1 port detected
[ 0.371000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[ 0.371000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
[ 0.372000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
[ 0.397000] ata1: SATA link down (SStatus 0 SControl 320)
[ 0.407000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 0.407000] ata1: irq_stat 0x00000040, connection status changed
[ 0.407000] ata1: SError: { DevExch }
[ 0.407000] ata1: hard resetting link
[ 0.438000] hub 6-0:1.0: USB hub found
[ 0.438000] hub 6-0:1.0: 1 port detected
[ 0.438000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
[ 0.438000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
[ 0.439000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
[ 0.505000] hub 7-0:1.0: USB hub found
[ 0.505000] hub 7-0:1.0: 1 port detected
[ 0.505000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
[ 0.505000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
[ 0.506000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
[ 0.572000] hub 8-0:1.0: USB hub found
[ 0.572000] hub 8-0:1.0: 1 port detected
[ 0.573000] usbcore: registered new interface driver usb-storage
[ 0.573000] mousedev: PS/2 mouse device common for all mice
[ 0.573000] i2c /dev entries driver
[ 0.573000] usbcore: registered new interface driver btusb
[ 0.573000] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.573000] usbcore: registered new interface driver usbhid
[ 0.573000] usbhid: USB HID core driver
[ 0.574000] NET: Registered protocol family 17
[ 0.574000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.574000] Bluetooth: HIDP socket layer initialized
[ 0.574000] Key type dns_resolver registered
[ 0.574000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[ 0.575000] EBI CS1: setting up NAND flash (primary)
[ 0.575000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
[ 0.575000] nand: Samsung NAND 1GiB 3,3V 8-bit
[ 0.575000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.575000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-16 (1KiB sector)
[ 0.576000] Bad block table found at page 524224, version 0x01
[ 0.576000] Bad block table found at page 524160, version 0x01
[ 0.576000] nand_read_bbt: bad block at 0x00002f080000
[ 0.576000] nand_read_bbt: bad block at 0x000032740000
[ 0.577000] Creating 3 MTD partitions on "brcmnand.0":
[ 0.577000] 0x000000000000-0x000040000000 : "complete"
[ 0.583000] 0x000000000000-0x000000600000 : "kernel"
[ 0.584000] 0x000000600000-0x000040000000 : "rootfs"
[ 0.590000] EBI CS0: setting up SPI flash
[ 0.590000] brcm_setup_spi_flash: can't locate SPI master
[ 0.590000] brcm_setup_cs: can't register SPI flash (error -19)
[ 0.591000] ubi0: default fastmap pool size: 256
[ 0.591000] ubi0: default fastmap WL pool size: 128
[ 0.591000] ubi0: attaching mtd2
[ 0.600000] usb 3-1: new high-speed USB device number 2 using ehci-brcm
[ 0.702000] ata2: SATA link down (SStatus 0 SControl 320)
[ 0.719000] hub 3-1:1.0: USB hub found
[ 0.719000] hub 3-1:1.0: 4 ports detected
[ 0.911000] ubi0: attached by fastmap
[ 0.911000] ubi0: fastmap pool size: 256
[ 0.911000] ubi0: fastmap WL pool size: 128
[ 0.927000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
[ 0.927000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 0.927000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 0.927000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 0.927000] ubi0: good PEBs: 8138, bad PEBs: 6, corrupted PEBs: 0
[ 0.927000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 0.927000] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 2074121938
[ 0.927000] ubi0: available PEBs: 0, total reserved PEBs: 8138, PEBs reserved for bad PEB handling: 154
[ 0.927000] ubi0: background thread "ubi_bgt0d" started, PID 82
[ 0.927000] ALSA device list:
[ 0.927000] No soundcards found.
[ 0.927000] Warning: unable to open an initial console.
[ 0.928000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 83
[ 1.004000] usb 3-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.051000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.051000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.051000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.051000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 1.051000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 570219F0-4287-4767-BDC6-42567E1E8A09, small LPT model
[ 1.063000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 1.075000] devtmpfs: mounted
[ 1.076000] Freeing unused kernel memory: 288K
[ 1.076000] This architecture does not have kernel memory protection.
[ 1.177000] usb 3-1.3: new high-speed USB device number 4 using ehci-brcm
[ 1.383000] random: crng init done
[ 6.145000] ata1: link is slow to respond, please be patient (ready=0)
[ 7.140000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.313000] ata1.00: ATA-9: WDC WD3003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 7.313000] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.313000] ata1.00: configured for UDMA/133
[ 7.313000] ata1: EH complete
[ 7.314000] scsi 0:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 7.328000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.328000] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 7.328000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 7.328000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.329000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.329000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.376000] sda: sda1
[ 7.377000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.394000] tpm: loading out-of-tree module taints kernel.
[ 7.395000] usbcore: registered new interface driver tpm
[ 8.375000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.710000] dvb: module_layout: kernel tainted.
[ 10.710000] Disabling lock debugging due to kernel taint
[ 14.792000] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 14.796000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 14.835000] dvbdev: DVB: registering new adapter (dvb0)
[ 14.836000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-C)...
[ 14.837000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-C)...
[ 14.840000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-C)...
[ 14.841000] platform dvb0.0: DVB: registering adapter 0 frontend 3 (DVB-C)...
[ 15.180000] input: front panel as /devices/virtual/input/input2
[ 16.013000] Registered IR keymap rc-cec
[ 16.013000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 16.014000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 16.259000] SGI XFS with security attributes, realtime, no debug enabled
[ 16.583000] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.585000] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 16.585000] usb 3-1.3: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 16.586000] usb 3-1.3: r8712u: Boot from EFUSE: Autoload OK
[ 17.308000] usb 3-1.3: r8712u: CustomerID = 0x000a
[ 17.308000] usb 3-1.3: r8712u: MAC Address from efuse = 00:87:23:82:a1:16
[ 17.308000] usb 3-1.3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 17.308000] usbcore: registered new interface driver r8712u

[bumperbee]

This time is by inserting the 5Tb Hdd.


[ 0.055000] Key type id_resolver registered
[ 0.055000] Key type id_legacy registered
[ 0.055000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.055000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.055000] fuse init (API version 7.26)
[ 0.061000] bounce: pool size: 64 pages
[ 0.061000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.061000] io scheduler noop registered
[ 0.061000] io scheduler cfq registered (default)
[ 0.061000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.062000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
[ 0.070000] loop: module loaded
[ 0.070000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[ 0.080000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.080000] ahci ahci.0: flags: ncq sntf stag clo slum part
[ 0.084000] scsi host0: ahci
[ 0.085000] scsi host1: ahci
[ 0.085000] ata1: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
[ 0.085000] ata2: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
[ 0.085000] brcmstb_nand: NAND controller driver is loaded
[ 0.086000] libphy: Fixed MDIO Bus: probed
[ 0.086000] __clk_enable: network [1]
[ 0.086000] bcm7425_pm_network_enable 00
[ 0.086000] __clk_enable: enet [1]
[ 0.086000] bcm40nm_pm_genet_enable 00
[ 0.198000] bcmgenet: configuring instance #0 for internal PHY
[ 0.220000] bcmgenet bcmgenet.0 eth0: link down
[ 0.220000] __clk_disable: enet [0]
[ 0.220000] bcm40nm_pm_genet_disable 00
[ 0.220000] __clk_disable: network [0]
[ 0.220000] bcm7425_pm_network_disable 00
[ 0.220000] __clk_enable: network [1]
[ 0.220000] bcm7425_pm_network_enable 00
[ 0.220000] __clk_enable: moca_genet [1]
[ 0.220000] bcm40nm_pm_genet1_enable 00
[ 0.220000] __clk_enable: moca [1]
[ 0.220000] bcm40nm_pm_moca_enable 00
[ 0.233000] Found PHY at Address 31
[ 0.233000] bcmgenet: configuring instance #1 for external RGMII
[ 0.233000] __clk_disable: moca [0]
[ 0.233000] bcm40nm_pm_moca_disable 00
[ 0.233000] __clk_disable: moca_genet [0]
[ 0.233000] bcm40nm_pm_genet1_disable 00
[ 0.233000] __clk_disable: network [0]
[ 0.233000] bcm7425_pm_network_disable 00
[ 0.233000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.233000] __clk_enable: usb [1]
[ 0.233000] bcm40nm_pm_usb_enable 00
[ 0.233000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.233000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.243000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[ 0.250000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.250000] hub 1-0:1.0: USB hub found
[ 0.250000] hub 1-0:1.0: 1 port detected
[ 0.250000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[ 0.250000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[ 0.261000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
[ 0.268000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[ 0.268000] hub 2-0:1.0: USB hub found
[ 0.268000] hub 2-0:1.0: 1 port detected
[ 0.268000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
[ 0.268000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
[ 0.279000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
[ 0.286000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
[ 0.286000] hub 3-0:1.0: USB hub found
[ 0.286000] hub 3-0:1.0: 1 port detected
[ 0.286000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
[ 0.286000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
[ 0.297000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
[ 0.304000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
[ 0.304000] hub 4-0:1.0: USB hub found
[ 0.304000] hub 4-0:1.0: 1 port detected
[ 0.304000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.304000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.305000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
[ 0.305000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
[ 0.371000] hub 5-0:1.0: USB hub found
[ 0.371000] hub 5-0:1.0: 1 port detected
[ 0.371000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[ 0.371000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
[ 0.372000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
[ 0.397000] ata1: SATA link down (SStatus 0 SControl 320)
[ 0.407000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 0.407000] ata1: irq_stat 0x00000040, connection status changed
[ 0.407000] ata1: SError: { DevExch }
[ 0.407000] ata1: hard resetting link
[ 0.438000] hub 6-0:1.0: USB hub found
[ 0.438000] hub 6-0:1.0: 1 port detected
[ 0.438000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
[ 0.438000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
[ 0.439000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
[ 0.505000] hub 7-0:1.0: USB hub found
[ 0.505000] hub 7-0:1.0: 1 port detected
[ 0.505000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
[ 0.505000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
[ 0.506000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
[ 0.572000] hub 8-0:1.0: USB hub found
[ 0.572000] hub 8-0:1.0: 1 port detected
[ 0.573000] usbcore: registered new interface driver usb-storage
[ 0.573000] mousedev: PS/2 mouse device common for all mice
[ 0.573000] i2c /dev entries driver
[ 0.573000] usbcore: registered new interface driver btusb
[ 0.573000] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.573000] usbcore: registered new interface driver usbhid
[ 0.573000] usbhid: USB HID core driver
[ 0.574000] NET: Registered protocol family 17
[ 0.574000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.574000] Bluetooth: HIDP socket layer initialized
[ 0.574000] Key type dns_resolver registered
[ 0.574000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[ 0.575000] EBI CS1: setting up NAND flash (primary)
[ 0.575000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
[ 0.575000] nand: Samsung NAND 1GiB 3,3V 8-bit
[ 0.575000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.575000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-16 (1KiB sector)
[ 0.576000] Bad block table found at page 524224, version 0x01
[ 0.576000] Bad block table found at page 524160, version 0x01
[ 0.576000] nand_read_bbt: bad block at 0x00002f080000
[ 0.576000] nand_read_bbt: bad block at 0x000032740000
[ 0.577000] Creating 3 MTD partitions on "brcmnand.0":
[ 0.577000] 0x000000000000-0x000040000000 : "complete"
[ 0.583000] 0x000000000000-0x000000600000 : "kernel"
[ 0.584000] 0x000000600000-0x000040000000 : "rootfs"
[ 0.590000] EBI CS0: setting up SPI flash
[ 0.590000] brcm_setup_spi_flash: can't locate SPI master
[ 0.590000] brcm_setup_cs: can't register SPI flash (error -19)
[ 0.591000] ubi0: default fastmap pool size: 256
[ 0.591000] ubi0: default fastmap WL pool size: 128
[ 0.591000] ubi0: attaching mtd2
[ 0.600000] usb 3-1: new high-speed USB device number 2 using ehci-brcm
[ 0.702000] ata2: SATA link down (SStatus 0 SControl 320)
[ 0.719000] hub 3-1:1.0: USB hub found
[ 0.719000] hub 3-1:1.0: 4 ports detected
[ 0.911000] ubi0: attached by fastmap
[ 0.911000] ubi0: fastmap pool size: 256
[ 0.911000] ubi0: fastmap WL pool size: 128
[ 0.927000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
[ 0.927000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 0.927000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 0.927000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 0.927000] ubi0: good PEBs: 8138, bad PEBs: 6, corrupted PEBs: 0
[ 0.927000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 0.927000] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 2074121938
[ 0.927000] ubi0: available PEBs: 0, total reserved PEBs: 8138, PEBs reserved for bad PEB handling: 154
[ 0.927000] ubi0: background thread "ubi_bgt0d" started, PID 82
[ 0.927000] ALSA device list:
[ 0.927000] No soundcards found.
[ 0.927000] Warning: unable to open an initial console.
[ 0.928000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 83
[ 1.004000] usb 3-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.051000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.051000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.051000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.051000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 1.051000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 570219F0-4287-4767-BDC6-42567E1E8A09, small LPT model
[ 1.063000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 1.075000] devtmpfs: mounted
[ 1.076000] Freeing unused kernel memory: 288K
[ 1.076000] This architecture does not have kernel memory protection.
[ 1.177000] usb 3-1.3: new high-speed USB device number 4 using ehci-brcm
[ 1.383000] random: crng init done
[ 6.145000] ata1: link is slow to respond, please be patient (ready=0)
[ 7.140000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.313000] ata1.00: ATA-9: WDC WD3003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 7.313000] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.313000] ata1.00: configured for UDMA/133
[ 7.313000] ata1: EH complete
[ 7.314000] scsi 0:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 7.328000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.328000] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 7.328000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 7.328000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.329000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.329000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.376000] sda: sda1
[ 7.377000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.394000] tpm: loading out-of-tree module taints kernel.
[ 7.395000] usbcore: registered new interface driver tpm
[ 8.375000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.710000] dvb: module_layout: kernel tainted.
[ 10.710000] Disabling lock debugging due to kernel taint
[ 14.792000] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 14.796000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 14.835000] dvbdev: DVB: registering new adapter (dvb0)
[ 14.836000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-C)...
[ 14.837000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-C)...
[ 14.840000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-C)...
[ 14.841000] platform dvb0.0: DVB: registering adapter 0 frontend 3 (DVB-C)...
[ 15.180000] input: front panel as /devices/virtual/input/input2
[ 16.013000] Registered IR keymap rc-cec
[ 16.013000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 16.014000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 16.259000] SGI XFS with security attributes, realtime, no debug enabled
[ 16.583000] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.585000] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 16.585000] usb 3-1.3: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 16.586000] usb 3-1.3: r8712u: Boot from EFUSE: Autoload OK
[ 17.308000] usb 3-1.3: r8712u: CustomerID = 0x000a
[ 17.308000] usb 3-1.3: r8712u: MAC Address from efuse = 00:87:23:82:a1:16
[ 17.308000] usb 3-1.3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 17.308000] usbcore: registered new interface driver r8712u

[bumperbee]

Hi Everyone, I had just done a upgrading and it is now able to read my 5Tb Hdd. But the capacity of the Hdd is wrong, it is reading it as 2.86Tb which my internal Hdd is also showing the same capacity, 2.86Tb.

[birdman]

I just tried adding the file twice, it didn’t work. Using the “add image” also didn’t work.Well, they should do. Both will pop-up a browser for you to select which file to upload.


I can only append below the content of dmesg by inserting a flashdrive.Which shows no sign of being recognized.
However, you now say that after an upgrade you can see it - so we can ignore this test.

[birdman]

Hi Everyone, I had just done a upgrading and it is now able to read my 5Tb Hdd. But the capacity of the Hdd is wrong, it is reading it as 2.86Tb which my internal Hdd is also showing the same capacity, 2.86Tb.Are you sure these aren't two views of the same file-system?

Since you say you can now see it, could you upload a dmesg file for the system in this state?

[bumperbee]

Hi Birdman, it did pop-up a browser for me to select files (both methods) and able to select the files too. But after this I need to select upload and a red mark will show besides the file name informing it’s unsuccessful in uploading.
I think not, because I can see the different models of both the Hdd, the only problem is the capacity of the 5Tb is incorrect as it read as 2.86Tb. I am afraid the system will work with the 5Tb Hdd only at 2.86Tb capacity. Append below is the dmesg file.

[ 0.055000] NFS: Registering the id_resolver key type
[ 0.055000] Key type id_resolver registered
[ 0.055000] Key type id_legacy registered
[ 0.055000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.055000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.056000] fuse init (API version 7.26)
[ 0.061000] bounce: pool size: 64 pages
[ 0.061000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.061000] io scheduler noop registered
[ 0.061000] io scheduler cfq registered (default)
[ 0.061000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.062000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
[ 0.063000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
[ 0.070000] loop: module loaded
[ 0.070000] ahci ahci.0: SSS flag set, parallel bus scan disabled
[ 0.080000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.080000] ahci ahci.0: flags: ncq sntf stag clo slum part
[ 0.084000] scsi host0: ahci
[ 0.085000] scsi host1: ahci
[ 0.085000] ata1: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
[ 0.085000] ata2: FORCE: PHY spd limit set to 3.0Gbps
[ 0.085000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
[ 0.085000] brcmstb_nand: NAND controller driver is loaded
[ 0.086000] libphy: Fixed MDIO Bus: probed
[ 0.086000] __clk_enable: network [1]
[ 0.086000] bcm7425_pm_network_enable 00
[ 0.086000] __clk_enable: enet [1]
[ 0.086000] bcm40nm_pm_genet_enable 00
[ 0.198000] bcmgenet: configuring instance #0 for internal PHY
[ 0.220000] bcmgenet bcmgenet.0 eth0: link down
[ 0.220000] __clk_disable: enet [0]
[ 0.220000] bcm40nm_pm_genet_disable 00
[ 0.220000] __clk_disable: network [0]
[ 0.220000] bcm7425_pm_network_disable 00
[ 0.220000] __clk_enable: network [1]
[ 0.220000] bcm7425_pm_network_enable 00
[ 0.220000] __clk_enable: moca_genet [1]
[ 0.220000] bcm40nm_pm_genet1_enable 00
[ 0.220000] __clk_enable: moca [1]
[ 0.220000] bcm40nm_pm_moca_enable 00
[ 0.233000] Found PHY at Address 31
[ 0.233000] bcmgenet: configuring instance #1 for external RGMII
[ 0.233000] __clk_disable: moca [0]
[ 0.233000] bcm40nm_pm_moca_disable 00
[ 0.233000] __clk_disable: moca_genet [0]
[ 0.233000] bcm40nm_pm_genet1_disable 00
[ 0.233000] __clk_disable: network [0]
[ 0.233000] bcm7425_pm_network_disable 00
[ 0.233000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.233000] __clk_enable: usb [1]
[ 0.233000] bcm40nm_pm_usb_enable 00
[ 0.233000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.233000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.243000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
[ 0.250000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.250000] hub 1-0:1.0: USB hub found
[ 0.250000] hub 1-0:1.0: 1 port detected
[ 0.250000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[ 0.250000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[ 0.261000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
[ 0.268000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[ 0.268000] hub 2-0:1.0: USB hub found
[ 0.268000] hub 2-0:1.0: 1 port detected
[ 0.268000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
[ 0.268000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
[ 0.279000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
[ 0.286000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
[ 0.286000] hub 3-0:1.0: USB hub found
[ 0.286000] hub 3-0:1.0: 1 port detected
[ 0.286000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
[ 0.286000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
[ 0.297000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
[ 0.304000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
[ 0.304000] hub 4-0:1.0: USB hub found
[ 0.304000] hub 4-0:1.0: 1 port detected
[ 0.304000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.304000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.305000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
[ 0.305000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
[ 0.371000] hub 5-0:1.0: USB hub found
[ 0.371000] hub 5-0:1.0: 1 port detected
[ 0.371000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[ 0.371000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
[ 0.372000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
[ 0.397000] ata1: SATA link down (SStatus 0 SControl 320)
[ 0.407000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
[ 0.407000] ata1: irq_stat 0x00000040, connection status changed
[ 0.407000] ata1: SError: { DevExch }
[ 0.407000] ata1: hard resetting link
[ 0.438000] hub 6-0:1.0: USB hub found
[ 0.438000] hub 6-0:1.0: 1 port detected
[ 0.438000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
[ 0.438000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
[ 0.439000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
[ 0.505000] hub 7-0:1.0: USB hub found
[ 0.505000] hub 7-0:1.0: 1 port detected
[ 0.505000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
[ 0.505000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
[ 0.506000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
[ 0.572000] hub 8-0:1.0: USB hub found
[ 0.572000] hub 8-0:1.0: 1 port detected
[ 0.573000] usbcore: registered new interface driver uas
[ 0.573000] usbcore: registered new interface driver usb-storage
[ 0.573000] mousedev: PS/2 mouse device common for all mice
[ 0.573000] i2c /dev entries driver
[ 0.573000] usbcore: registered new interface driver btusb
[ 0.573000] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.573000] usbcore: registered new interface driver usbhid
[ 0.573000] usbhid: USB HID core driver
[ 0.574000] NET: Registered protocol family 17
[ 0.574000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.574000] Bluetooth: HIDP socket layer initialized
[ 0.574000] Key type dns_resolver registered
[ 0.574000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
[ 0.575000] EBI CS1: setting up NAND flash (primary)
[ 0.575000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
[ 0.575000] nand: Samsung NAND 1GiB 3,3V 8-bit
[ 0.575000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.575000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-16 (1KiB sector)
[ 0.576000] Bad block table found at page 524224, version 0x01
[ 0.576000] Bad block table found at page 524160, version 0x01
[ 0.577000] nand_read_bbt: bad block at 0x00002f080000
[ 0.577000] nand_read_bbt: bad block at 0x000032740000
[ 0.577000] Creating 3 MTD partitions on "brcmnand.0":
[ 0.577000] 0x000000000000-0x000040000000 : "complete"
[ 0.583000] 0x000000000000-0x000000600000 : "kernel"
[ 0.584000] 0x000000600000-0x000040000000 : "rootfs"
[ 0.590000] EBI CS0: setting up SPI flash
[ 0.590000] brcm_setup_spi_flash: can't locate SPI master
[ 0.590000] brcm_setup_cs: can't register SPI flash (error -19)
[ 0.591000] ubi0: default fastmap pool size: 256
[ 0.591000] ubi0: default fastmap WL pool size: 128
[ 0.591000] ubi0: attaching mtd2
[ 0.600000] usb 3-1: new high-speed USB device number 2 using ehci-brcm
[ 0.702000] ata2: SATA link down (SStatus 0 SControl 320)
[ 0.719000] hub 3-1:1.0: USB hub found
[ 0.719000] hub 3-1:1.0: 4 ports detected
[ 0.920000] ubi0: attached by fastmap
[ 0.920000] ubi0: fastmap pool size: 256
[ 0.920000] ubi0: fastmap WL pool size: 128
[ 0.936000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
[ 0.936000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 0.936000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 0.936000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 0.936000] ubi0: good PEBs: 8138, bad PEBs: 6, corrupted PEBs: 0
[ 0.936000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 0.936000] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2074121938
[ 0.936000] ubi0: available PEBs: 0, total reserved PEBs: 8138, PEBs reserved for bad PEB handling: 154
[ 0.936000] ubi0: background thread "ubi_bgt0d" started, PID 82
[ 0.936000] ALSA device list:
[ 0.936000] No soundcards found.
[ 0.936000] Warning: unable to open an initial console.
[ 0.938000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 83
[ 1.004000] usb 3-1.1: new full-speed USB device number 3 using ehci-brcm
[ 1.048000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.048000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.048000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.048000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[ 1.048000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 570219F0-4287-4767-BDC6-42567E1E8A09, small LPT model
[ 1.054000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 1.056000] devtmpfs: mounted
[ 1.056000] Freeing unused kernel memory: 276K
[ 1.056000] This architecture does not have kernel memory protection.
[ 1.130000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 1.131000] ata1.00: ATA-9: WDC WD3003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 1.131000] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.131000] ata1.00: configured for UDMA/133
[ 1.131000] ata1: EH complete
[ 1.132000] scsi 0:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 1.140000] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.140000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.140000] sd 0:0:0:0: [sda] Write Protect is off
[ 1.141000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.141000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.141000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.177000] usb 3-1.3: new high-speed USB device number 4 using ehci-brcm
[ 1.181000] sda: sda1
[ 1.182000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.286000] random: crng init done
[ 2.359000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.093000] tpm: loading out-of-tree module taints kernel.
[ 8.094000] usbcore: registered new interface driver tpm
[ 11.402000] dvb: module_layout: kernel tainted.
[ 11.402000] Disabling lock debugging due to kernel taint
[ 15.001000] input: dreambox remote control (native) as /devices/virtual/input/input0
[ 15.002000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 15.038000] dvbdev: DVB: registering new adapter (dvb0)
[ 15.039000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-C)...
[ 15.040000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-C)...
[ 15.041000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-C)...
[ 15.042000] platform dvb0.0: DVB: registering adapter 0 frontend 3 (DVB-C)...
[ 15.376000] input: front panel as /devices/virtual/input/input2
[ 16.187000] Registered IR keymap rc-cec
[ 16.187000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[ 16.188000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[ 16.446000] SGI XFS with security attributes, realtime, no debug enabled
[ 16.778000] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.780000] r8712u: register rtl8712_netdev_ops to netdev_ops
[ 16.780000] usb 3-1.3: r8712u: USB_SPEED_HIGH with 4 endpoints
[ 16.781000] usb 3-1.3: r8712u: Boot from EFUSE: Autoload OK
[ 17.502000] usb 3-1.3: r8712u: CustomerID = 0x000a
[ 17.502000] usb 3-1.3: r8712u: MAC Address from efuse = 00:87:23:82:a1:16
[ 17.502000] usb 3-1.3: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[ 17.503000] usbcore: registered new interface driver r8712u

[birdman]

Hi Birdman, it did pop-up a browser for me to select files (both methods) and able to select the files too. But after this I need to select upload and a red mark will show besides the file name informing it’s unsuccessful in uploading.It seems that here is (was) a recent issue here, that is being looked into:

http://www.world-of-satellite.com/showthread.php?56876-Unable-to-updoad-attachments-(phots)

[birdman]

I think not, because I can see the different models of both the Hdd, the only problem is the capacity of the 5Tb is incorrect as it read as 2.86Tb.In which case I'm confused, as the dmesg report you attached only shows the presence of one disk


[ 1.132000] scsi 0:0:0:0: Direct-Access ATA WDC WD3003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 1.140000] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.140000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.140000] sd 0:0:0:0: [sda] Write Protect is off
[ 1.141000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.141000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.141000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.177000] usb 3-1.3: new high-speed USB device number 4 using ehci-brcm
[ 1.181000] sda: sda1
[ 1.182000] sd 0:0:0:0: [sda] Attached SCSI disk


Where can you see "the different models of both the Hd"?

[bumperbee]

It is in Vix>Device Manager

[birdman]

It is in Vix>Device ManagerI don't have one of those. Do you mean "Mount Manager"?

[birdman]

Can you post the contents or /proc/partitions when you have the 5TB disk plugged in, please?

[cactikid]

very interesting same image number and on solo2 no network mounts,must do a new thread.

[bumperbee]

Hi Birdman, very sorry for the wrong info, it is Mount Manager.
As requested, I open the \proc\partitions file and it appears empty. The sizes show 0Kb and there is nothing in it.
It seem I am able to attached an image now, pleased see image that show both my internal 3Tb & Usb 5Tb Hdd is mounted. But the 5Tb Hdd capacity is read as 2.86Tb which is incorrect and it’s the same capacity with the 3Tb Hdd.


53848