PDA

View Full Version : HDMI In recording


linuxtv
11-05-17, 08:07
What are your experiences regarding recording HDMI Input on the Ultimo 4K? When recording I do get some picture but mostly green blocks and artifacts. Is this HDCP copy protection? I thought there would be no picture at all if that was the case. Have tried from Apple TV and Raspberry Pi no problem with HDMI in picture, only recordings has the issue.

I am using openvix-5.0.013
linuxtv
11-05-17, 08:48
Just tried the VTI image and recording works there. But I prefer OpenVix. Could it be different drivers?
twol
11-05-17, 09:15
If you don't get another response then try this:- :)
Try OpenATV. If that doesn't work then it's differences between the OE-A images and VTI
If OpenATV works then it's a ViX issue.

I guess HDCP depends on the source .......... had to stick one of these hdmi switch boxes between source and receiver (ET10000) to get that to work.
tappari
11-05-17, 09:50
If you don't get another response then try this:- :)
Try OpenATV. If that doesn't work then it's differences between the OE-A images and VTI
If OpenATV works then it's a ViX issue.

I guess HDCP depends on the source .......... had to stick one of these hdmi switch boxes between source and receiver (ET10000) to get that to work.
Same with ATV and splitter won`t help.
tappari
11-05-17, 10:12
Recording with VTi image seems to be ok. Does not need splitter.
CRMS
03-12-20, 14:45
Resurrection of an old thread but same question.
What/how to record HDMI in on GigaBlue Quad 4K UHD?? And what resolution?? Didn't spot anything in manual or a guide??
abu baniaz
03-12-20, 15:17
I don't know about resolution.

There are two methods of recoding that I can remember of.

Blue > Activate PIP in HDMI mode ( something along those lines) > Record

Create an entry in a bouquet file using text editor. Stop Enigma2 with "init 4" before transferring
#SERVICE 8192:0:1:0:0:0:0:0:0:0:
#DESCRIPTION HDMI Input
abu baniaz
03-12-20, 17:55
Create an entry in a bouquet file using text editor. Stop Enigma2 with "init 4" before transferring
#SERVICE 8192:0:1:0:0:0:0:0:0:0:
#DESCRIPTION HDMI Input

P.S
Dont modify an ABM bouquet as it will be removed next time ABM runs
abu baniaz
07-01-21, 09:20
There have changes that improve this on VU receivers. Unfortunately no sound, but picture is fine. I tested a Duo 4K. Will be in 5.4 004