Changes to configuration of 2nd tuner, post install

[drbytes]

Hi *

I've got my VU DUO set up and spent an hour or so pulling in all the channels but I made a mistake, when the VTI installation wizard prompted me about the 2nd tuner I set it to 'not connected' as a result I'm missing some features (like streaming to PC when TV is set to another channel).
Is there a way to change this without having to go trough the whole installation all over again?

Cheers

[silverfox0786]

have nt used vti but it should be menu system tuner configuration and then set it as you need it

[pooface]

have nt used vti but it should be menu system tuner configuration and then set it as you need it

As fox says... Can't remember exactly, but there is a menu set up for it, where you can configure the tuners ... bascially adjusting your setup...

[mmcmedia]

Right hope this help iam using 2.2 so hopefully its the same for you

Press Menu
Setup
Service Searching
Tuner Configuration
Tuner A should already be set by yourself as per post
So move down to tuner "B" press ok
Configuation mode Simple
Mode "single if your just using 1 sat"
Satellite "choose which sat u have if its just 28.2 then press ok

Then Exit Hopefully you should now how both tuners with a satellite showing if your just on 28.2 the obviously both tuner should reflect this